Optimization of LiFePO4 nanoparticle suspensions with polyethyleneimine for aqueous processing.

Addition of dispersants to aqueous based lithium-ion battery electrode formulations containing LiFePO(4) is critical to obtaining a stable suspension. The resulting colloidal suspensions enable dramatically improved coating deposition when processing electrodes. This research examines the colloidal chemistry modifications based on polyethyleneimine (PEI) addition and dispersion characterization required to produce high quality electrode formulations and coatings for LiFePO(4) active cathode material. The isoelectric point, a key parameter in characterizing colloidal dispersion stability, of LiFePO(4) and super P C45 were determined to be pH = 4.3 and 3.4, respectively. PEI, a cationic surfactant, was found to be an effective dispersant. It is demonstrated that 1.0 wt % and 0.5 wt % PEI were required to stabilize the LiFePO(4) and super P C45 suspension, respectively. LiFePO(4) cathode suspensions with 1.5 wt % PEI demonstrated the best dispersibility of all components, as evidenced by viscosity and agglomerate size of the suspensions and elemental distribution within dry cathodes. The addition of PEI significantly improved the LiFePO(4) performance.

[1]  L. Gaines,et al.  COSTS OF LITHIUM-ION BATTERIES FOR VEHICLES , 2000 .

[2]  K. Zaghib,et al.  LiFePO4 water-soluble binder electrode for Li-ion batteries , 2007 .

[3]  Chia‐Chen Li,et al.  A novel and efficient water-based composite binder for LiCoO2 cathodes in lithium-ion batteries , 2007 .

[4]  U. Paik,et al.  Dispersion properties of aqueous-based LiFePO4 pastes and their electrochemical performance for lithium batteries. , 2008, Ultramicroscopy.

[5]  G. Kirby,et al.  Tailored Rheological Behavior of Mullite and BSAS Suspensions Using a Cationic Polyelectrolyte , 2005 .

[6]  B. Derjaguin,et al.  Theory of the stability of strongly charged lyophobic sols and of the adhesion of strongly charged particles in solutions of electrolytes , 1993 .

[7]  Y. Abu-Lebdeh,et al.  Water-soluble binders for MCMB carbon anodes for lithium-ion batteries , 2011 .

[8]  Weishan Li,et al.  Preparation and performances of LiFePO4 cathode in aqueous solvent with polyacrylic acid as a binder , 2009 .

[9]  Mao-Sung Wu,et al.  Effects of PAA-NH4 Addition on the Dispersion Property of Aqueous LiCoO2 Slurries and the Cell Performance of As-Prepared LiCoO2 Cathodes , 2005 .

[10]  K. S. Nanjundaswamy,et al.  Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries , 1997 .

[11]  H. N. Stein,et al.  Shear thickening (dilatancy) in concentrated dispersions , 1990 .

[12]  Claus Daniel,et al.  Materials processing for lithium-ion batteries , 2011 .

[13]  Margret Wohlfahrt-Mehrens,et al.  Fine-particle lithium iron phosphate LiFePO4 synthesized by a new low-cost aqueous precipitation technique , 2003 .

[14]  Shin-ichi Nishimura,et al.  Air Exposure Effect on LiFePO4 , 2008 .

[15]  Chia-Chen Li,et al.  Using Poly(4-Styrene Sulfonic Acid) to Improve the Dispersion Homogeneity of Aqueous-Processed LiFePO4 Cathodes , 2010 .

[16]  Young-Min Choi,et al.  Effect of poly(acrylic acid) on adhesion strength and electrochemical performance of natural graphite negative electrode for lithium-ion batteries , 2006 .

[17]  Young-Min Choi,et al.  Effect of Carboxymethyl Cellulose on Aqueous Processing of LiFePO4 Cathodes and Their Electrochemical Performance , 2008 .

[18]  M. Armand,et al.  Issues and challenges facing rechargeable lithium batteries , 2001, Nature.

[19]  D. Guyomard,et al.  Optimizing the surfactant for the aqueous processing of LiFePO4 composite electrodes , 2010 .

[20]  D. Guyomard,et al.  Design of Aqueous Processed Thick LiFePO4 Composite Electrodes for High-Energy Lithium Battery , 2009 .

[21]  J. Shim,et al.  The development of low cost LiFePO4-based high power lithium-ion batteries , 2003 .

[22]  Chia‐Chen Li,et al.  Aqueous processing of lithium-ion battery cathodes using hydrogen peroxide-treated vapor-grown carbon fibers for improvement of electrochemical properties , 2007 .

[23]  Chia-Chen Li,et al.  Improvements of dispersion homogeneity and cell performance of aqueous-processed LiCoO2 cathodes by using dispersant of PAA-NH4 , 2006 .

[24]  Chia‐Chen Li,et al.  Effects of pH on the dispersion and cell performance of LiCoO2 cathodes based on the aqueous process , 2007 .