Effects of Stack Structure and Heat Loss on the Stability and Efficiency of Steam-Methanol Reforming Microreactors for Hydrogen Production
暂无分享,去创建一个
[1] D. Pashchenko. Low-grade heat utilization in the methanol-fired gas turbines through a thermochemical fuel transformation , 2022, Thermal Science and Engineering Progress.
[2] C. Gourdon,et al. Experimental study of heat transfer coefficient in heat exchanger reactors with square millimetric zigzag channels , 2022, Chemical Engineering and Processing - Process Intensification.
[3] Wenli Du,et al. Hierarchical Numbering-Up of Modular Reactors: A Multi-Objective Optimization Approach , 2022, Chemical Engineering Journal.
[4] H. Lee,et al. Dehydrogenation of perhydro-dibenzyltoluene for hydrogen production in a microchannel reactor , 2022, International Journal of Hydrogen Energy.
[5] Hao Feng,et al. Residence Time Characteristics of Taylor Reacting Flow in a Microchannel Reactor during Long-Term Operation , 2022, ACS Sustainable Chemistry & Engineering.
[6] Luwei Yang,et al. Numerical analysis of methanol steam reforming reactor heated by catalytic combustion for hydrogen production , 2022, International Journal of Hydrogen Energy.
[7] I. Ortiz,et al. Performance of continuous-flow micro-reactors with curved geometries. Experimental and numerical analysis , 2022, Chemical Engineering Journal.
[8] L. Shao,et al. CFD analysis on the intensified mechanism of gas-liquid mass transfer in a microporous tube-in-tube microchannel reactor , 2022, International Journal of Heat and Mass Transfer.
[9] D. Pashchenko,et al. Steam methane reforming in a microchannel reformer: Experiment, CFD-modelling and numerical study , 2021 .
[10] G. Wang,et al. Highly Controlled Structured Catalysts for On-board Methanol Reforming , 2021, Journal of Energy Chemistry.
[11] Taejun Kim,et al. Recent trends in the development of reactor systems for hydrogen production via methanol steam reforming , 2021, International Journal of Hydrogen Energy.
[12] M. Centeno,et al. Current scenario and prospects in manufacture strategies for glass, quartz, polymers and metallic microreactors: A comprehensive review , 2021, Chemical Engineering Research and Design.
[13] Dayu Liu,et al. Asymmetric behaviors of interface-stabilized slug pairs in a T-junction microchannel reactor , 2021 .
[14] M. M. Rahman,et al. Compromising with corrector step of SIMPLE Algorithm , 2021, Math. Comput. Simul..
[15] D. Iranshahi,et al. Analysis of integrated system for ammonia synthesis and methyl formate production in the thermally coupled reactor , 2021 .
[16] L. Cadús,et al. Cross-flow plate reactor for ethanol steam reforming: A theoretical study , 2021, Chemical Engineering and Processing - Process Intensification.
[17] Timothy Noël,et al. Scale-up of micro- and milli-reactors: An overview of strategies, design principles and applications , 2021 .
[18] P. Nikrityuk,et al. A new semiempirical model for the heat and mass transfer inside a spherical catalyst in a stream of hot CH4/H2O gases , 2021, Chemical Engineering Science.
[19] Jian Qin,et al. Introducing compressibility with SIMPLE algorithm , 2021, Math. Comput. Simul..
[20] G. Yadav,et al. Steam Reforming of Methanol for Hydrogen Production: A Critical Analysis of Catalysis, Processes, and Scope , 2021 .
[21] D. Pashchenko. Thermochemical waste-heat recuperation as on-board hydrogen production technology , 2020 .
[22] Robert C. Brown. Process Intensification through Directly Coupled Autothermal Operation of Chemical Reactors , 2020, Joule.
[23] A. Bismarck,et al. An integrated method for measuring gas permeability and diffusivity of porous solids , 2020 .
[24] G. Fieg,et al. Modeling and experimental investigation of the spatial heat transfer in a plate reactor with meandering millichannels , 2020 .
[25] L. Turchetti,et al. Wall heat transfer coefficient and effective radial conductivity of ceramic foam catalyst supports , 2020 .
[26] M. Adrover,et al. Process intensification through the use of multifunctional reactors for PEMFC grade hydrogen production: Process design and simulation , 2020 .
[27] J. Ellzey,et al. Heat recirculating reactors: Fundamental research and applications , 2019, Progress in Energy and Combustion Science.
[28] E. López,et al. Study of a thermally integrated parallel plates reactor for hydrogen production , 2019, Chemical Engineering Science.
[29] Shirish H. Sonawane,et al. A review on microreactors: Reactor fabrication, design, and cutting-edge applications , 2018, Chemical Engineering Science.
[30] Panagiotis D. Christofides,et al. Real-time furnace balancing of steam methane reforming furnaces , 2018, Chemical Engineering Research and Design.
[31] D. Pashchenko. Effect of the geometric dimensionality of computational domain on the results of CFD-modeling of steam methane reforming , 2018 .
[32] Helen Durand,et al. Bayesian model averaging for estimating the spatial temperature distribution in a steam methane reforming furnace , 2018 .
[33] Helen Durand,et al. CFD modeling of a industrial-scale steam methane reforming furnace , 2017 .
[34] Helen Durand,et al. Temperature balancing in steam methane reforming furnace via an integrated CFD/data-based optimization approach , 2017, Comput. Chem. Eng..
[35] N. Karimi,et al. Analytical investigation of heat transfer and classical entropy generation in microreactors – The influences of exothermicity and asymmetry , 2017 .
[36] Hyunjin Ji,et al. Steam-to-carbon ratio control strategy for start-up and operation of a fuel processor , 2017 .
[37] G. Gauthier,et al. Effect of external heat loss on the propagation and quenching of flames in small heat-recirculating tubes , 2016 .
[38] Jie Wu,et al. Reaction screening in continuous flow reactors , 2016 .
[39] Helen Durand,et al. CFD modeling and control of a steam methane reforming reactor , 2016 .
[40] O. P. Klenov,et al. Thermally autonomous microchannel reactor to produce hydrogen in steam reforming of methanol , 2015 .
[41] Vinod M. Janardhanan,et al. Modeling process intensified catalytic plate reactor for synthesis gas production , 2014 .
[42] O. Deutschmann. Modeling of the Interactions Between Catalytic Surfaces and Gas-Phase , 2014, Catalysis Letters.
[43] Enrico Bianchi,et al. Heat transfer properties of metal foam supports for structured catalysts: Wall heat transfer coefficient , 2013 .
[44] Carlo Giorgio Visconti,et al. Monolithic catalysts with high thermal conductivity for the Fischer–Tropsch synthesis in tubular reactors , 2011 .
[45] Mustafa Karakaya,et al. Microchannel reactor modeling for combustion driven reforming of iso-octane , 2011 .
[46] O. Deutschmann,et al. Interaction of heterogeneous and homogeneous kinetics with mass and heat transfer in catalytic reforming of logistic fuels , 2011 .
[47] D. Vlachos,et al. Enhancing stability in parallel plate microreactor stacks for syngas production , 2011 .
[48] Vinod M. Janardhanan,et al. Numerical study of on-board fuel reforming in a catalytic plate reactor for solid-oxide fuel cells , 2011 .
[49] Dionisios G. Vlachos,et al. Scale-out of Microreactor Stacks for Portable and Distributed Processing: Coupling of Exothermic and Endothermic Processes for Syngas Production , 2010 .
[50] Dionisios G. Vlachos,et al. Intensification of steam reforming of natural gas: Choosing combustible fuel and reforming catalyst , 2010 .
[51] Y. Matsumura,et al. Suppression of CO by-production in steam reforming of methanol by addition of zinc oxide to silica-supported copper catalyst , 2009 .
[52] K. Sotowa,et al. Flow Uniformity in Deep Microchannel Reactor under High Throughput Conditions , 2009 .
[53] Jianli Hu,et al. Intensified Fischer–Tropsch synthesis process with microchannel catalytic reactors , 2009 .
[54] Liwei Pan,et al. Flow Pattern, Pressure Drop, and Mass Transfer in a Gas−Liquid Concurrent Two-Phase Flow Microchannel Reactor , 2009 .
[55] D. Vlachos,et al. Stability and performance of catalytic microreactors: Simulations of propane catalytic combustion on Pt , 2008 .
[56] Robert A Dagle,et al. Methanol steam reforming for hydrogen production. , 2007, Chemical reviews.
[57] Zhangxin Chen,et al. Critical review of the impact of tortuosity on diffusion , 2007 .
[58] D. Vlachos,et al. Optimal reactor dimensions for homogeneous combustion in small channels , 2007 .
[59] Yong Wang,et al. From seconds to milliseconds to microseconds through tailored microchannel reactor design of a steam methane reformer , 2007 .
[60] Albert Renken,et al. Microstructured reactors for catalytic reactions , 2005 .
[61] Chang-Soo Kim,et al. Hydrogen production with integrated microchannel fuel processor for portable fuel cell systems , 2005 .
[62] Ravi Arora,et al. Microchannel Technology Scale-up to Commercial Capacity , 2005 .
[63] J. Hsu,et al. Residence time distribution of a cylindrical microreactor. , 2005, Journal of Physical Chemistry B.
[64] Chang-Soo Kim,et al. Development of microchannel methanol steam reformer , 2004 .
[65] D. G. Norton,et al. A CFD study of propane/air microflame stability , 2004 .
[66] Yong Wang,et al. Kinetic studies of methanol steam reforming over Pd/ZnO catalyst using a microchannel reactor , 2004 .
[67] Gunther Kolb,et al. Micro-structured reactors for gas phase reactions , 2004 .
[68] Asterios Gavriilidis,et al. Flow Distribution in Different Microreactors Scale-Out Geometries and the Effect on Manufacturing Tolerances and Channel Blocking , 2004 .
[69] D. G. Norton,et al. Combustion characteristics and flame stability at the microscale: a CFD study of premixed methane/air mixtures , 2003 .
[70] Klavs F. Jensen,et al. Microfabricated Differential Reactor for Heterogeneous Gas Phase Catalyst Testing , 2002 .
[71] M. Carlier,et al. Influence of equivalence ratio on the structure of low-pressure premixed methanolair flames , 1990 .
[72] F. Ho,et al. A variational calculation of the effective surface diffusion coefficient and tortuosity , 1981 .
[73] Erich A. Farber,et al. Variation of Heat Transfer Coefficient with Length , 1957 .