CFD Studies on Biomass Thermochemical Conversion
暂无分享,去创建一个
[1] Mohand Tazerout,et al. Numerical investigation of the partial oxidation in a two-stage downdraft gasifier , 2008 .
[2] Baoming Li,et al. Validation of kinetic parameter values for prediction of pyrolysis behaviour of corn stalks in a horizontal entrained-flow reactor , 2008 .
[3] Colomba Di Blasi,et al. Modeling chemical and physical processes of wood and biomass pyrolysis , 2008 .
[4] Avdhesh Sharma. Modeling fluid and heat transport in the reactive, porous bed of downdraft (biomass) gasifier , 2007 .
[5] Geraldine J. Heynderickx,et al. Impact of radiation models in CFD simulations of steam cracking furnaces , 2007, Comput. Chem. Eng..
[6] Guan Heng Yeoh,et al. Modelling the pyrolysis of wet wood – II. Three-dimensional cone calorimeter simulation , 2007 .
[7] Guan Heng Yeoh,et al. Modelling the pyrolysis of wet wood – I. Three-dimensional formulation and analysis , 2007 .
[8] Inmaculada Arauzo,et al. Integration of CFD codes and advanced combustion models for quantitative burnout determination , 2007 .
[9] Da-Wen Sun,et al. Applications of computational fluid dynamics (CFD) in the modelling and design of ventilation systems in the agricultural industry: a review. , 2007, Bioresource technology.
[10] K. S. Shanmukharadhya,et al. Effect of Fuel Moisture on Combustion in a Bagasse Fired Furnace , 2007 .
[11] Nicholas Syred,et al. Development of fragmentation models for solid fuel combustion and gasification as subroutines for inclusion in CFD codes , 2007 .
[12] Lin Ma,et al. Modelling the combustion of pulverized biomass in an industrial combustion test furnace , 2007 .
[13] Rikard Gebart,et al. CFD modelling of black liquor gasification: Identification of important model parameters , 2007 .
[14] Martin Miltner,et al. Process simulation and CFD calculations for the development of an innovative baled biomass-fired combustion chamber , 2007 .
[15] K. S. Shanmukharadhya. Simulation and Thermal Analysis of the Effect of Fuel Size on Combustion in an Industrial Biomass Furnace , 2007 .
[16] H. S. Mukunda,et al. Part II: Computational studies on a pulverised fuel stove , 2006 .
[17] D. Mohan,et al. Pyrolysis of Wood/Biomass for Bio-oil: A Critical Review , 2006 .
[18] Søren Knudsen Kær,et al. Towards a CFD-based mechanistic deposit formation model for straw-fired boilers , 2006 .
[19] C. K. Tan,et al. Use of artificial intelligence techniques for optimisation of co-combustion of coal with biomass , 2006 .
[20] C. D. Goddard,et al. Optimisation study of a large waste-to-energy plant using computational modelling and experimental measurements , 2005 .
[21] Floren Plaza,et al. Development of advanced technology for biomass combustion—CFD as an essential tool , 2005 .
[22] Alvaro Sanz,et al. Modeling circulating fluidized bed biomass gasifiers. A pseudo-rigorous model for stationary state , 2005 .
[23] Kefa Cen,et al. A model of wood flash pyrolysis in fluidized bed reactor , 2005 .
[24] Søren Knudsen Kær,et al. Numerical modelling of a straw-fired grate boiler , 2004 .
[25] B. Babu,et al. Pyrolysis of biomass: improved models for simultaneous kinetics and transport of heat, mass and momentum , 2004 .
[26] F. Marias,et al. A model of a rotary kiln incinerator including processes occurring within the solid and the gaseous phases , 2003, Comput. Chem. Eng..
[27] F. C. Lockwood,et al. An artificial intelligence treatment of devolatilization for pulverized coal and biomass in co-fired flames , 2003 .
[28] Johann C. Wurzenberger,et al. Thermal conversion of biomass: Comprehensive reactor and particle modeling , 2002 .
[29] A. Robinson,et al. Effect of Large Aspect Ratio of Biomass Particles on Carbon Burnout in a Utility Boiler , 2002 .
[30] Da-Wen Sun,et al. Applications of computational fluid dynamics (cfd) in the food industry: a review , 2002 .
[31] S. Pisupati,et al. An integrative approach for combustor design using CFD methods , 2002 .
[32] A. Brink,et al. Comparisons of the Validity of Different Simplified NH3−Oxidation Mechanisms for Combustion of Biomass , 2000 .
[33] D. Fletcher,et al. A CFD based combustion model of an entrained flow biomass gasifier , 2000 .
[34] A. M. Eaton,et al. Components, formulations, solutions, evaluation, and application of comprehensive combustion models , 1999 .
[35] A. Saario,et al. Comparison of Global Ammonia Chemistry Mechanisms in Biomass Combustion and Selective Noncatalytic Reduction Process Conditions , 2008 .
[36] Jim Swithenbank,et al. Converting moving-grate incineration from combustion to gasification - numerical simulation of the burning characteristics. , 2007, Waste management.
[37] John Kent,et al. Conditional moment closure in a bagasse-fired boiler , 2007 .
[38] Behdad Moghtaderi,et al. The state‐of‐the‐art in pyrolysis modelling of lignocellulosic solid fuels , 2006 .
[39] Jenny M. Jones,et al. Co-firing pulverised coal and biomass: a modeling approach , 2005 .
[40] Søren Knudsen Kær,et al. EXTENDING THE CAPABILITY OF CFD CODES TO ASSESS ASH RELATED PROBLEMS IN BIOMASS FIRED BOILERS , 2003 .
[41] Søren Knudsen Kær,et al. Extending the modeling capacity of CFD codes applied to biomass-fired boilers , 2003 .
[42] I. S. Ertesvåg,et al. Computational modeling of nitric oxide formation in biomass combustion , 2002 .
[43] J. Azevedo,et al. Modeling biomass devolatilization using the chemical percolation devolatilization model for the main components , 2002 .
[44] A. Sarofim,et al. Coal devolatilization at high temperatures , 1977 .