Investigation of the Roles of Flame Propagation, Turbulent Mixing, and Volumetric Heat Release in Conventional and Low Temperature Diesel Combustion

In this work, a multi-mode combustion model, that combines a comprehensive kinetics scheme for volumetric heat release and a level-set-based model for turbulent flame propagation, is applied over the range of engine combustion regimes from non-premixed to premixed conditions. Model predictions of the ignition processes and flame structures are compared to measurements from the literature of naturally occurring luminous emission and OH planar laser induced fluorescence (PLIF). Comparisons are performed over a range of conditions from conventional diesel operation (i.e., short ignition delay, high oxygen concentration) to a low temperature combustion mode (i.e., long ignition delay, low oxygen concentration). The multi-mode combustion model shows excellent prediction of the bulk thermodynamic properties (e.g., rate of heat release), as well as local phenomena (i.e., ignition location, fuel and combustion intermediate species distributions, and flame structure). The results of this study show that even in the limit of mixing controlled combustion, the flame structure is captured extremely well without considering sub-grid scale turbulence-chemistry interactions. The combustion process is dominated by volumetric heat release in a thin zone around the periphery of the jet. The rate of combustion is controlled by transport of reactive mixture to the reaction zone and the dominant mixing processes are well described by the large scale mixing and diffusion. As the ignition delay is increased past the end of injection (i.e., positive ignition dwell), both the simulations and optical diagnostics show that the reaction zone spans the entire jet cross-section. In this combustion mode the combustion rate is no longer limited by transport to the reaction zone, but rather by kinetic timescales. Although comparisons of results with and without consideration of flame propagation show very similar flame structures and combustion characteristics, the addition of the flame propagation model reveals details of the edge or triple-flame structure in the region surrounding the diffusion flame at the lift off location. These details are not captured by the purely kinetics based combustion model, but are well represented by the present multi-mode model.Copyright © 2010 by ASME

[1]  Rolf D. Reitz,et al.  Experiments and Modeling of Adaptive Injection Strategies (AIS) in Low Emissions Diesel Engines , 2009 .

[2]  Song-Charng Kong,et al.  The Development and Application of a Diesel Ignition and Combustion Model for Multidimensional Engine Simulation , 1995 .

[3]  M. Musculus,et al.  In-cylinder unburned hydrocarbon visualization during low-temperature compression-ignition engine combustion using formaldehyde PLIF , 2007 .

[4]  John B. Heywood,et al.  Internal combustion engine fundamentals , 1988 .

[5]  A. A. Amsden,et al.  A Particle Numerical Model for Wall Film Dynamics in Port-Injected Engines , 1996 .

[6]  C. Westbrook,et al.  Diesel combustion: an integrated view combining laser diagnostics, chemical kinetics, and empirical validation , 1999 .

[7]  Sylvain Savy,et al.  A Study of Methods to Lower HC and CO Emissions in Diesel HCCI , 2008 .

[8]  M. Musculus,et al.  Multiple Simultaneous Optical Diagnostic Imaging of Early-Injection Low-Temperature Combustion in , 2006 .

[9]  Rolf D. Reitz,et al.  Spark Ignition Engine Combustion Modeling Using a Level Set Method with Detailed Chemistry , 2006 .

[10]  L. Kirsch,et al.  The autoignition of hydrocarbon fuels at high temperatures and pressures—Fitting of a mathematical model , 1977 .

[11]  A. A. Amsden,et al.  KIVA-3V, Release 2: Improvements to KIVA-3V , 1999 .

[12]  Rolf D. Reitz,et al.  Investigation of Mixing and Temperature Effects on HC/CO Emissions for Highly Dilute Low Temperature Combustion in a Light Duty Diesel Engine , 2007 .

[13]  Peter J. O'Rourke,et al.  A Spray/Wall Interaction Submodel for the KIVA-3 Wall Film Model , 2000 .

[14]  R. Reitz,et al.  Studying the roles of kinetics and turbulence in the simulation of diesel combustion by means of an extended characteristic time model , 1999 .

[15]  Rolf D. Reitz,et al.  An Improved Spray Model for Reducing Numerical Parameter Dependencies in Diesel Engine CFD Simulations , 2008 .

[16]  M. Metghalchi,et al.  Burning Velocities of Mixtures of Air with Methanol, Isooctane, and Indolene at High Pressure and Temperature , 1982 .

[17]  Rolf D. Reitz,et al.  A combustion model for IC engine combustion simulations with multi-component fuels , 2011 .

[18]  Rolf D. Reitz,et al.  A Study of the Effects of High EGR, High Equivalence Ratio, and Mixing Time on Emissions Levels in a Heavy-Duty Diesel Engine for PCCI Combustion , 2006 .

[19]  Rolf D. Reitz,et al.  Development of a Flame Propagation Model for Dual-Fuel Partially Premixed Compression Ignition Engines , 2006 .

[20]  Rolf D. Reitz,et al.  Mixing and flame structures inferred from OH-PLIF for conventional and low-temperature diesel engine combustion , 2009 .

[21]  R. Reitz,et al.  A reduced chemical kinetic model for IC engine combustion simulations with primary reference fuels , 2008 .

[22]  R. Reitz,et al.  MODELING SPRAY ATOMIZATION WITH THE KELVIN-HELMHOLTZ/RAYLEIGH-TAYLOR HYBRID MODEL , 1999 .

[23]  Rolf D. Reitz,et al.  The application of a multicomponent droplet vaporization model to gasoline direct injection engines , 2003 .

[24]  Rolf D. Reitz,et al.  Modeling ignition and combustion in spark-ignition engines using a level set method , 2003 .

[25]  R. Reitz,et al.  Turbulence Modeling of Internal Combustion Engines Using RNG κ-ε Models , 1995 .

[26]  John Abraham,et al.  ENTRAPMENT CHARACTERISTICS OF TRANSIENT GAS JETS , 1996 .

[27]  J. Dec.  A Conceptual Model of DI Diesel Combustion Based on Laser-Sheet Imaging* , 1997 .

[28]  R. Reitz,et al.  Reduction of Numerical Parameter Dependencies in Diesel Spray Models , 2007 .