Using MCNP for success criteria evaluation of reactor trip function in probabilistic modeling of ATWS upon LOOP

[1]  C. L. Smith,et al.  Systems Analysis Programs for Hands-on Integrated Reliability Evaluations (SAPHIRE) Code Reference Manual , 2008 .

[2]  Saeed Setayeshi,et al.  Core design improvement by optimizing the control and protection system elements distribution , 2010 .

[3]  Chunkuan Shih,et al.  Investigating the execution of EOPs in LOTDFP + ATWS + LOCA scenarios for an ABWR using MAAP code , 2010 .

[4]  Kwon-Yeong Lee,et al.  Control rod drop analysis by finite element method using fluid–structure interaction for a pressurized water reactor power plant , 2009 .

[5]  Yann Perin,et al.  Application of the ATHLET/COBRA-TF thermal-hydraulics coupled code to the analysis of BWR ATWS , 2017 .

[6]  Sung Quun Zee,et al.  Performance evaluation of an advanced integral reactor against an anticipated transient without scram , 2006 .

[7]  J. K. Shultis,et al.  An MCNP primer , 2011 .

[8]  Soeren Kliem,et al.  ATWS analysis for PWR using the coupled code system DYN3D/ATHLET , 2009 .

[9]  Sutanto,et al.  Analysis of anticipated transient without scram of a Super Fast Reactor with single flow pass core , 2015 .

[10]  Mohammadreza Nematollahi,et al.  Sensitivity analysis on the effect of software-induced common cause failure probability in the computer-based reactor trip system unavailability , 2013 .

[11]  S. Kiai,et al.  Monte Carlo simulation of a research reactor with nominal power of 7 MW to design new control safety rods , 2010 .

[12]  Patrick Massin,et al.  Methodology for a numerical simulation of an insertion or a drop of the rod cluster control assembly in a PWR , 2007 .