Modeling and Study of the Quasi-Static Behavior of Piezoceramic Telescopic Actuation Architectures

Piezoelectric stacks are often used in smart structures applications that demand large forces. However, there are numerous applications that require slightly more displacement than is available from stacks, and the performance requirements allow room for some force to be sacrificed to obtain this displacement. A new type of piezoelectric actuation architecture, referred to as telescopic, was designed to meet the need for moderate displacement amplification (up to 20 times) while still producing large forces. This architecture internally leverages the piezoelectric strain by a series of cascading shells uniquely connected by end caps such that the shells “telescope” out when activated. This paper presents an analytical model to predict the force-deflection behavior of this actuator with compliant end caps. To aid in evaluating this new architecture, the losses due to architectural features such as end caps, gap size, number of shells, and constant thickness/area are presented along with a comparison to the current state of the art.

[1]  Craig D. Near,et al.  Piezoelectric actuator technology , 1996, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[2]  Chin-Po Kuo,et al.  Long stroke precision PZT actuator , 1995 .

[3]  Kenji Uchino,et al.  Metal–Ceramic Composite Actuators , 1992 .

[4]  A. Dogan,et al.  Metal-Ceramic Composite Transducer, the "Moonie" , 1995 .

[5]  James Douglas Ervin.  Design, characterization, and assessment of the recurve actuation architecture. , 1999 .

[6]  Gene H. Haertling,et al.  Compositional study of PLZT rainbow ceramics for piezo actuators , 1994, Proceedings of 1994 IEEE International Symposium on Applications of Ferroelectrics.

[7]  Terry D. Hinnerichs,et al.  Vibration Control for Precision Manufacturing Using Piezoelectric Actuators , 1995 .

[8]  Dhananjay K. Samak,et al.  Design of high-force high-displacement actuators for helicopter rotors , 1994, Smart Structures.

[9]  Leslie E. Cross,et al.  Dynamic Characteristics of Rainbow Ceramics , 1995 .

[10]  V. D. Kugel,et al.  Comparative analysis of piezoelectric bending-mode actuators , 1997, Smart Structures.

[11]  Victor Giurgiutiu,et al.  Energy-Based Comparison of Solid-State Induced-Strain Actuators , 1996 .

[12]  Diann Brei,et al.  Force-Deflection Behavior of Individual Unimorph Piezoceramic C-Block Actuators , 1996, Aerospace.

[13]  Ron Barrett,et al.  Adaptive flight control surfaces, wings, rotors, and active aerodynamics , 1996, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[14]  Harley H. Cudney,et al.  An active engine mount with a piezoelectric stacked actuator , 1994 .

[15]  H. S. Tzou,et al.  Development of a light-weight robot end-effector using polymeric piezoelectric bimorph , 1989, Proceedings, 1989 International Conference on Robotics and Automation.

[16]  Stephanie A. Wise,et al.  Displacement properties of RAINBOW and THUNDER piezoelectric actuators , 1998 .

[17]  Steven R. Hall,et al.  Design of a high-efficiency discrete servo-flap actuator for helicopter rotor control , 1997, Smart Structures.

[18]  S. Timoshenko,et al.  THEORY OF PLATES AND SHELLS , 1959 .