Stabilization of moved objects for tele-operated robots

In this paper a tele-operated robot system is presented for transporting and stabilizing a ball rolling on a tray. A ball on a tray is a very sensitive system. Therefore it can be used to make lateral forces visible. In our experimental setup a round tray of 25 cm in diameter is attached to the end effector of an industrial robot manipulator. A small ball is placed on the tray. The position of the rolling ball is observed by an USB camera which is attached to the end effector of the robot above the tray, moving with the end effector. The result of the presented research is a controllable transport of the tray as a tele-operated system in all three dimensions. Lateral forces are smoothed by convenient adaption of the orientation and movement of the end effector. The mathematical model of the controller is based on Lagrangian mechanics. The input of the controller is the current position of the ball on the tray observed by the camera and the current configuration of the kinematic chain of the robot manipulator. The idea behind this experiment is to use a small sphere as a sensor to minimize lateral forces while transporting sensitive goods.

[1]  Jon Rigelsford,et al.  Modelling and Control of Robot Manipulators , 2000 .

[2]  Imme Ebert-Uphoff,et al.  Active acceleration compensation for transport vehicles carrying delicate objects , 2004, IEEE Transactions on Robotics.

[3]  Peter I. Corke.  The Machine Vision Toolbox: a MATLAB toolbox for vision and vision-based control , 2005, IEEE Robotics & Automation Magazine.

[4]  Dirk Wollherr,et al.  Basketball robot: Ball-On-Plate with pure haptic information , 2008, 2008 IEEE International Conference on Robotics and Automation.

[5]  Heinz Wörn,et al.  Gentle robotic handling - adaptation of gripperorientation to minimize undesired shear forces , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[6]  L. D. Reid,et al.  Flight simulation motion-base drive algorithms: part 1. Developing and testing equations , 1985 .

[7]  Peter Corke,et al.  The machine vision toolbox , 2005 .

[8]  Meyer Nahon,et al.  FLIGHT SIMULATION MOTION-BASE DRIVE ALGORITHMS.: PART 2, SELECTING THE SYSTEM PARAMETERS , 1986 .

[9]  Ken'ichi Yano,et al.  Robust liquid container transfer control for complete sloshing suppression , 2001, IEEE Trans. Control. Syst. Technol..

[10]  Imme Ebert-Uphoff,et al.  Motion planning for active acceleration compensation , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[11]  Kevin C. Craig,et al.  Mechatronic design of a ball-on-plate balancing system , 2002 .

[12]  R. Dillmann,et al.  Active acceleration compensation using a Stewart-platform on a mobile robot , 1997, Proceedings Second EUROMICRO Workshop on Advanced Mobile Robots.