High-performance multiple-layer PIM composite hollow fiber membranes for gas separation

[1]  C. Liang,et al.  Ultrahigh Flux Composite Hollow Fiber Membrane via Highly Crosslinked PDMS for Recovery of Hydrocarbons: Propane and Propene. , 2018, Macromolecular rapid communications.

[2]  Tai‐Shung Chung,et al.  High-performance composite hollow fiber membrane for flue gas and air separations , 2017 .

[3]  L. Shao,et al.  Pushing CO2-philic membrane performance to the limit by designing semi-interpenetrating networks (SIPN) for sustainable CO2 separations , 2017 .

[4]  Ryan P. Lively,et al.  Defect-free PIM-1 hollow fiber membranes , 2017 .

[5]  Jiangtao Liu,et al.  Highly permeable and aging resistant 3D architecture from polymers of intrinsic microporosity incorporated with beta-cyclodextrin , 2017 .

[6]  Jian Zuo,et al.  Formation of defect‐free polyetherimide/PIM‐1 hollow fiber membranes for gas separation , 2014 .

[7]  Richard W. Baker,et al.  Gas Separation Membrane Materials: A Perspective , 2014 .

[8]  Reiner Sebastian Sprick,et al.  Conjugated Polymers of Intrinsic Microporosity (C‐PIMs) , 2014 .

[9]  Tai‐Shung Chung,et al.  High performance PIM-1/Matrimid hollow fiber membranes for CO2/CH4, O2/N2 and CO2/N2 separation , 2013 .

[10]  Pei Li,et al.  The effects of substrate characteristics and pre-wetting agents on PAN–PDMS composite hollow fiber membranes for CO2/N2 and O2/N2 separation , 2013 .

[11]  V. Chen,et al.  Challenges and opportunities for mixed-matrix membranes for gas separation , 2013 .

[12]  E. Hernández‐Hernández,et al.  Polymer Molecular Weight Measurement , 2013 .

[13]  J. C. Jansen,et al.  An Efficient Polymer Molecular Sieve for Membrane Gas Separations , 2013, Science.

[14]  M. Guiver,et al.  Polymer Rigidity Improves Microporous Membranes , 2013, Science.

[15]  Youchang Xiao,et al.  UV‐Rearranged PIM‐1 Polymeric Membranes for Advanced Hydrogen Purification and Production , 2012 .

[16]  S. Takayama,et al.  Surface chemistry modification of PDMS elastomers with boiling water improves cellular adhesion , 2012 .

[17]  Pei Li,et al.  Molecular engineering of PIM-1/Matrimid blend membranes for gas separation , 2012 .

[18]  Colin A. Scholes,et al.  Membrane gas separation applications in natural gas processing , 2012 .

[19]  D. Fritsch,et al.  High performance organic solvent nanofiltration membranes: Development and thorough testing of thin film composite membranes made of polymers of intrinsic microporosity (PIMs) , 2012 .

[20]  Robin Irons,et al.  Materials challenges for the development of solid sorbents for post-combustion carbon capture , 2012 .

[21]  G. Robertson,et al.  Azide-based cross-linking of polymers of intrinsic microporosity (PIMs) for condensable gas separation. , 2011, Macromolecular rapid communications.

[22]  Haiqing Lin,et al.  Power plant post-combustion carbon dioxide capture: An opportunity for membranes , 2010 .

[23]  Benny D. Freeman,et al.  Membrane Gas Separation: Freeman/Membrane Gas Separation , 2010 .

[24]  Neil B. McKeown,et al.  Exploitation of Intrinsic Microporosity in Polymer-Based Materials , 2010 .

[25]  J. Peter,et al.  Multilayer composite membranes for gas separation based on crosslinked PTMSP gutter layer and partially crosslinked Matrimid® 5218 selective layer , 2009 .

[26]  Neil B. McKeown,et al.  Synthesis, Characterization, and Gas Permeation Properties of a Novel Group of Polymers with Intrinsic Microporosity: PIM-Polyimides , 2009 .

[27]  I. Pinnau,et al.  Hydrocarbon/hydrogen mixed-gas permeation properties of PIM-1, an amorphous microporous spirobisindane polymer , 2009 .

[28]  H. Huinink,et al.  Influence of cross-linker concentration on the cross-linking of PDMS and the network structures formed , 2009 .

[29]  Jingshe Song,et al.  High-Performance Carboxylated Polymers of Intrinsic Microporosity (PIMs) with Tunable Gas Transport Properties† , 2009 .

[30]  Tai‐Shung Chung,et al.  The strategies of molecular architecture and modification of polyimide-based membranes for CO2 removal from natural gas—A review , 2009 .

[31]  Enrico Drioli,et al.  Membrane Gas Separation: A Review/State of the Art , 2009 .

[32]  Neil B. McKeown,et al.  Gas permeation parameters and other physicochemical properties of a polymer of intrinsic microporosity: Polybenzodioxane PIM-1 , 2008 .

[33]  L. Robeson,et al.  The upper bound revisited , 2008 .

[34]  William J. Koros,et al.  Mixed matrix hollow fiber membranes made with modified HSSZ-13 zeolite in polyetherimide polymer matrix for gas separation , 2007 .

[35]  Xian-she Feng,et al.  Poly(dimethyl siloxane) thin film composite membranes for propylene separation from nitrogen , 2006 .

[36]  P. Budd,et al.  Polymers of intrinsic microporosity (PIMs): organic materials for membrane separations, heterogeneous catalysis and hydrogen storage. , 2006, Chemical Society reviews.

[37]  P. Budd,et al.  Free volume and intrinsic microporosity in polymers , 2005 .

[38]  Neil B. McKeown,et al.  Gas separation membranes from polymers of intrinsic microporosity , 2005 .

[39]  Kai Yu Wang,et al.  The effects of flow angle and shear rate within the spinneret on the separation performance of poly(ethersulfone) (PES) ultrafiltration hollow fiber membranes , 2004 .

[40]  Neil B. McKeown,et al.  Solution‐Processed, Organophilic Membrane Derived from a Polymer of Intrinsic Microporosity , 2004 .

[41]  J. Genzer,et al.  Surface modification of Sylgard-184 poly(dimethyl siloxane) networks by ultraviolet and ultraviolet/ozone treatment. , 2002, Journal of colloid and interface science.

[42]  Rong Wang,et al.  Characterization of hollow fiber membranes in a permeator using binary gas mixtures , 2002 .

[43]  C Vandecasteele,et al.  Modelling of the retention of uncharged molecules with nanofiltration. , 2002, Water research.

[44]  D. R. Paul,et al.  Study on multi-layer composite hollow fiber membranes for gas separation , 1999 .

[45]  Richard W. Baker,et al.  The design of membrane vapor–gas separation systems , 1998 .

[46]  T. Matsuura,et al.  MEMBRANE CHARACTERIZATION BY SOLUTE TRANSPORT AND ATOMIC FORCE MICROSCOPY , 1998 .

[47]  P. Foley,et al.  Fabrication of composite hollow fibers for air separation , 1994 .

[48]  M. Meireles,et al.  A contribution to the translation of retention curves into pore size distributions for sieving membranes , 1990 .

[49]  I. Cabasso,et al.  Analysis and construction of multilayer composite membranes for the separation of gas mixtures , 1989 .

[50]  Klaus-Viktor Peinemann,et al.  Gas permeation through composite membranes , 1988 .

[51]  William J. Koros,et al.  Polymeric membrane materials for solution-diffusion based permeation separations , 1988 .

[52]  J. M. Henis,et al.  The Developing Technology of Gas Separating Membranes , 1983, Science.

[53]  A. Barry.  Viscometric Investigation of Dimethylsiloxane Polymers , 1946 .