论文信息 - Femtosecond laser drilling of alumina ceramic substrates

Femtosecond laser drilling of alumina ceramic substrates

In the paper, the result on femtosecond laser drilling of alumina ceramic substrate was reported. The effects of various laser parameters such as different focus position, traverse speed, drilling pattern, pausing time, etc. on the drilled hole quality in terms of surface finish, heat affected zone (HAZ), hole circularity, debris, microcracks were studied. The quality of laser-drilled holes on alumina ceramic substrates was evaluated with optical microscope, SEM/EDX, and X-ray μ-CT analysis. The optimum drilling conditions were identified. High-quality laser-drilled holes on alumina ceramic substrates were demonstrated. The developed process has potential application in manufacturing of alumina substrate based electronic devices.

[1] Walter Perrie,et al. Femtosecond laser micro-structuring of alumina ceramic , 2005 .

[2] Friedrich Dausinger. Laser drilling with short pulses , 2001, International Symposium on High Power Laser Systems and Applications.

[3] X. C. Wang,et al. 355 nm DPSS UV laser cutting of FR4 and BT/epoxy-based PCB substrates , 2008 .

[4] G. Mourou,et al. Laser ablation and micromachining with ultrashort laser pulses , 1997 .

[5] A. Tünnermann,et al. Femtosecond, picosecond and nanosecond laser ablation of solids , 1996 .

[6] M. D. Shirk,et al. A review of ultrashort pulsed laser ablation of materials , 1998 .

[7] D. Lynch,et al. Handbook of Optical Constants of Solids , 1985 .

[8] Soo Jin Chua,et al. Femtosecond pulse laser ablation of sapphire in ambient air , 2004 .

[9] Friedrich Dausinger,et al. High-precision microcutting of ceramics with short-pulsed solid state lasers , 2000, International Symposium on Laser Precision Microfabrication.

[10] Walter Perrie,et al. Characterization of ultrafast microstructuring of alumina (Al2O3) , 2005, SPIE LASE.

[11] Minoru Obara,et al. Selective ablation of AlN ceramic using femtosecond, nanosecond, and microsecond pulsed laser , 2001 .

[12] Andreas Ruf,et al. Hole formation process in laser deep drilling with short and ultrashort pulses , 2002, International Symposium on Laser Precision Microfabrication.