Effect of tempering on laser remelted AISI H13 tool steel

Abstract The effect of tempering temperature on surface hardened AISI H13 tool steel by laser remelting process using an Yb-fiber laser has been investigated. Single remelting tracks were produced in argon environment at different laser power and scan speed in the range of 400–600 W and 200–1600 mm/min respectively, maintaining the laser spot diameter fixed at 3 mm. Their effects on geometrical aspects, microstructure and microhardness were analyzed considering the thermal history of molten pool recorded using an IR pyrometer. Microstructure was found to be associated with cooling rate and melt pool lifetime, estimated from the temperature signal. Thereafter, remelted surface with 30% overlapping tracks was generated and subjected to 1 h tempering cycle at different temperatures in 500–900 °C range followed by hardness and wear tests. Hardness was retained fully up to 500 °C and significant softening occurred at 600 °C and 700 °C. At 800 °C and higher temperatures, effects of laser remelting were impaired completely, but substrate got hardened through martensite formation in a conventional manner. Wear resistance followed the trend of hardness. Changes in microstructure and formation of various phases were found to be the reasons behind the modifications in hardness.

[1]  I. R. Pashby,et al.  Surface hardening of steel using a high power diode laser , 2003 .

[2]  Zijue Tang,et al.  Review on thermal analysis in laser-based additive manufacturing , 2018, Optics & Laser Technology.

[3]  A. Nath,et al.  Analysis of temperature and surface hardening of low carbon thin steel sheets using Yb-fiber laser , 2016 .

[4]  J. Leunda,et al.  Effect of laser tempering of high alloy powder metallurgical tool steels after laser cladding , 2014 .

[5]  A. Nath,et al.  Effect of laser surface hardening on En18 (AISI 5135) steel , 1999 .

[6]  A. S. Rouhaghdam,et al.  Mechanical behavior of TiN/TiC multilayer coatings fabricated by plasma assisted chemical vapor deposition on AISI H13 hot work tool steel , 2014 .

[7]  Boris Štok,et al.  A computer simulation study of the effects of temperature change rate on austenite kinetics in laser hardening , 2015 .

[8]  M. Moradi,et al.  High power diode laser surface hardening of AISI 4130; statistical modelling and optimization , 2019, Optics & Laser Technology.

[9]  M. Doubenskaia,et al.  Optical monitoring of Nd : YAG laser cladding , 2004 .

[10]  Yong‐Chwang Chen,et al.  Laser surface hardening of H13 steel in the melt case , 2005 .

[11]  Guangnan Chen,et al.  Research on the Temperature Field in Laser Hardening , 2006 .

[12]  Ashish Kumar Nath,et al.  Monitoring and assessment of tungsten carbide wettability in laser cladded metal matrix composite coating using an IR pyrometer , 2017 .

[13]  R. Colaço,et al.  On the influence of retained austenite in the abrasive wear behaviour of a laser surface melted tool steel , 2005 .

[14]  Ashish Kumar Nath,et al.  Online monitoring of thermo-cycles and its correlation with microstructure in laser cladding of nickel based super alloy , 2017 .

[15]  Richard Leach,et al.  Review of in-situ process monitoring and in-situ metrology for metal additive manufacturing , 2016 .

[16]  Giovanni Tani,et al.  An efficient model for laser surface hardening of hypo-eutectoid steels , 2010 .

[17]  J. Majumdar,et al.  Wear and corrosion behavior of laser surface engineered AISI H13 hot working tool steel , 2015 .

[18]  Moon,et al.  Laser surface hardening ofAISI H13 tool steel , 2009 .

[19]  Young‐kook Lee,et al.  Surface hardening of shot peened H13 steel by enhanced nitrogen diffusion , 2013 .

[20]  H. Ki,et al.  Prediction of hardness and deformation using a 3-D thermal analysis in laser hardening of AISI H13 tool steel , 2017 .

[21]  Michael W. Sasnett,et al.  Beam characterization and measurement of propagation attributes , 1991, Photonics West - Lasers and Applications in Science and Engineering.

[22]  A. V. Makarov,et al.  Effect of laser quenching and subsequent heat treatment on the structure and wear resistance of a cemented steel 20KhN3A , 2007 .

[23]  Patrick Guillaume,et al.  High Resolution Temperature Measurement of Liquid Stainless Steel Using Hyperspectral Imaging , 2017, Sensors.

[24]  Mohammad H. Farshidianfar,et al.  Real-time monitoring and prediction of martensite formation and hardening depth during laser heat treatment , 2017 .

[25]  D. M. Gureev,et al.  Influence of laser tempering on the characteristics of surface layers of tool steels , 1990 .

[26]  K. Benyounis,et al.  A comparative study of laser surface hardening of AISI 410 and 420 martensitic stainless steels by using diode laser , 2019, Optics & Laser Technology.

[27]  A. Fortunato,et al.  A complete residual stress model for laser surface hardening of complex medium carbon steel components , 2016 .

[28]  N. Barka,et al.  Case study of laser hardening process applied to 4340 steel cylindrical specimens using simulation and experimental validation , 2018 .

[29]  C. Soriano,et al.  Laser surface tempering of hardened chromium-molybdenum alloyed steel , 2018 .

[30]  Ashish Kumar Nath,et al.  Online assessment of TiC decomposition in laser cladding of metal matrix composite coating , 2017 .

[31]  J. Majumdar,et al.  Structure–property correlation in laser surface treated AISI H13 tool steel for improved mechanical properties , 2014 .

[32]  N. Saklakoğlu.  Characterization of surface mechanical properties of H13 steel implanted by plasma immersion ion implantation , 2007 .

[33]  H. Man,et al.  Microstructure and corrosion behavior of laser surface-melted high-speed steels , 2007 .

[34]  Qingbiao Li,et al.  Effect of laser surface melting on microstructure and corrosion characteristics of AM60B magnesium alloy , 2015 .

[35]  F. M. Ghaini,et al.  Investigation into the efficiency of a fiber laser in surface hardening of ICD-5 tool steel , 2018, Optics & Laser Technology.

[36]  M. Kazazi,et al.  Improved laser surface hardening of AISI 4130 low alloy steel with electrophoretically deposited carbon coating , 2019, Optik.

[37]  A. Nath,et al.  Effect of Tempering Temperature on Hardness and Microstructure of Laser Surface Remelted AISI H13 Tool Steel , 2017 .

[38]  John D. Verhoeven,et al.  Steel Metallurgy for the Non-Metallurgist , 2007 .

[39]  Zhaoyun Chen,et al.  Microstructure and hardness investigation of 17-4PH stainless steel by laser quenching , 2012 .

[40]  Ashish Kumar Nath,et al.  Effect of laser operating mode in paint removal with a fiber laser , 2013 .

[41]  Zhihui Zhang,et al.  The thermal fatigue resistance of H13 steel repaired by a biomimetic laser remelting process , 2014 .

[42]  Michael K.H. Leung,et al.  Theoretical and experimental studies on laser transformation hardening of steel by customized beam , 2007 .

[43]  Lei Wang,et al.  Effect of tempering conditions on wear resistance in various wear mechanisms of H13 steel , 2011 .

[44]  Hong-Chao Zhang,et al.  A Review on In-situ Monitoring and Adaptive Control Technology for Laser Cladding Remanufacturing , 2017 .

[45]  J. R. Laguna-Camacho,et al.  A study of the abrasive resistance of sputtered CrN coatings deposited on AISI 316 and AISI H13 steel substrates using steel particles , 2011 .

[46]  R. Kovacevic,et al.  Hardness prediction in multi-pass direct diode laser heat treatment by on-line surface temperature monitoring , 2012 .

[47]  A. Nath,et al.  Studies on laser surface melting of tool steel — Part II: Mechanical properties of the surface , 2010 .

[48]  Ho-Jun Shin,et al.  Laser surface hardening of S45C medium carbon steel using ND:YAG laser with a continuous wave , 2007 .