Acoustic emission during the electrochemical corrosion of 304 stainless steel in H2SO4 solutions
暂无分享,去创建一个
Jian Xu | E. Han | Jian Xu | Xinqiang Wu | Xinqiang Wu | En-Hou Han
[1] T. W. Rettig,et al. Acoustic Emission Method for Monitoring Corrosion Reactions , 1976 .
[2] H. S. Khatak,et al. Evaluation of stress corrosion cracking phenomenon in an AISI type 316LN stainless steel using acoustic emission technique , 2007 .
[3] H. Tamura,et al. Transition of Cracking Mechanisms from Active Path Corrosion to Hydrogen Embrittlement in High Strength Steels in a Boiling Nitrate Solution , 1976 .
[4] R. H. Jones,et al. Evaluation of stress corrosion crack initiation using acoustic emission , 1991 .
[5] M. Golozar,et al. The transpassive dissolution mechanism of 316L stainless steel , 2009 .
[6] N. Sato. Anodic Breakdown of Passive Films on Metals , 1982 .
[7] Asa Prateepasen,et al. Pitting and uniform corrosion source recognition using acoustic emission parameters , 2010 .
[8] R. H. Jones,et al. Acoustic Emission During Pitting and Transgranular Crack Initiation in Type 304 Stainless Steel , 1992 .
[9] J. Ruzzante,et al. AE response of type 304 stainless steel during stress corrosion crack propagation , 2008 .
[10] M. Bojinov,et al. The transpassive dissolution mechanism of highly alloyed stainless steels: II. Effect of pH and solution anion on the kinetics , 2002 .
[11] P. K. Datta,et al. Hydrodynamic measurement of a single corrosion pit , 2004 .
[12] R. H. Jones,et al. Acoustic emission monitoring of stress corrosion cracking , 1988 .
[13] A. G. Foley,et al. The detection of selective phase corrosion in cast nickel aluminium bronze by acoustic emission techniques , 1982 .
[14] Andraž Legat,et al. Detection of SCC on prestressing steel wire by the simultaneous use of electrochemical noise and acoustic emission measurements , 2007 .
[15] C. Tronel,et al. An acoustic emission technique for monitoring pitting corrosion of austenitic stainless steels , 1995 .
[16] D. Macdonald. The Point Defect Model for the Passive State , 1992 .
[17] M. Fregonese,et al. Ability of acoustic emission technique for detection and monitoring of crevice corrosion on 304L austenitic stainless steel , 2003 .
[18] Nestor Perez,et al. Electrochemistry and Corrosion Science , 2004 .
[19] H. Idrissi,et al. Monitoring pitting corrosion of AISI 316L austenitic stainless steel by acoustic emission technique: Choice of representative acoustic parameters , 2001 .
[20] G. Song. Transpassivation of Fe-Cr-Ni stainless steels , 2005 .
[21] N. Kasai,et al. Correlation between corrosion rate and AE signal in an acidic environment for mild steel , 2009 .
[22] A. Laksimi,et al. Characterization by acoustic emission and electrochemical impedance spectroscopy of the cathodic disbonding of Zn coating , 2010 .
[23] H. Idrissi,et al. Detection of stress corrosion cracking of high-strength steel used in prestressed concrete structures by acoustic emission technique , 2008 .
[24] I. Kim,et al. Characteristics of acoustic emission during stress corrosion cracking of Inconel 600 alloy , 1997 .
[25] M. Bojinov,et al. The transpassive dissolution mechanism of highly alloyed stainless steels I. Experimental results and modelling procedure , 2002 .
[26] Kazimierz Darowicki,et al. Investigation of pitting corrosion of stainless steel by means of acoustic emission and potentiodynamic methods , 2003 .
[27] H. Idrissi,et al. Modern concept of acoustic emission (AE) coupled with electrochemical measurements for monitoring the elastomer-coated carbon steel damage in phosphoric acid medium , 2008 .
[28] Marian Chatenet,et al. Understanding aluminum behaviour in aqueous alkaline solution using coupled techniques: Part II: Acoustic emission study , 2010 .
[29] Fu-hui Wang,et al. The improvement of the corrosion resistance of 309 stainless steel in the transpassive region by nano-crystallization , 2009 .
[30] H. Tamura,et al. Application of Acoustic Emission Technique to the Study of Stress Corrosion Cracking in Distinguishing Between Active Path Corrosion and Hydrogen Embrittlement , 1974 .
[31] Marian Chatenet,et al. Understanding aluminum behaviour in aqueous alkaline solution using coupled techniques. Part I. Rotating ring-disk study , 2006 .
[32] Zhou-hua Jiang,et al. Effects of cold work and sensitization treatment on the corrosion resistance of high nitrogen stainless steel in chloride solutions , 2009 .
[33] Haixin Chang,et al. Analysis of modal acoustic emission signals of LY12CZ aluminum alloy at anodic and cathodic polarization , 2006 .
[34] M. A. Friesel,et al. Acoustic emission from integranular subcritical crack growth , 1989, Metallurgical and Materials Transactions A.
[35] C. Heiple,et al. Acoustic emission produced by deformation of metals and alloys , 1987 .
[36] Edvard Govekar,et al. Correlations of electrochemical noise, acoustic emission and complementary monitoring techniques during intergranular stress-corrosion cracking of austenitic stainless steel , 2010 .
[37] K.H.W. Seah,et al. The correlation of acoustic emission with rate of corrosion , 1993 .
[38] M. Fregonese,et al. Initiation and propagation steps in pitting corrosion of austenitic stainless steels: monitoring by acoustic emission , 2001 .
[39] Tetsuya Osaka,et al. Spectrum Analysis of Corrosion Potential Fluctuations for Localized Corrosion of Type 304 Stainless Steel , 1987 .
[40] Norio Sato,et al. A theory for breakdown of anodic oxide films on metals , 1971 .