Functionalized carbon nanotube-encapsulated magnesium-based nanocomposites with outstanding mechanical and biological properties as load-bearing bone implants

[1]  Guoqun Zhao,et al.  Strengthening mechanism and anisotropy of mechanical properties of Si3N4p/Al-Mg-Si composites fabricated by sintering and extrusion , 2021, Materials & Design.

[2]  A. Jiménez‐Suárez,et al.  Quality assessment and structural health monitoring of CNT reinforced CFRP and Ti6Al4V multi-material joints , 2021, Materials & Design.

[3]  C. Wen,et al.  Mechanical and corrosion properties of graphene nanoplatelet–reinforced Mg–Zr and Mg–Zr–Zn matrix nanocomposites for biomedical applications , 2021 .

[4]  C. Wen,et al.  Recent research and progress of biodegradable zinc alloys and composites for biomedical applications: Biomechanical and biocorrosion perspectives , 2020, Bioactive materials.

[5]  Zhao-hui Wang,et al.  Combination of enhanced thermal conductivity and strength of MWCNTs reinforced Mg-6Zn matrix composite , 2020 .

[6]  S. Ramakrishna,et al.  Graphene Family Nanomaterial Reinforced Magnesium-Based Matrix Composites for Biomedical Application: A Comprehensive Review , 2020, Metals.

[7]  C. Wen,et al.  Magnesium-based composites reinforced with graphene nanoplatelets as biodegradable implant materials , 2020 .

[8]  B. Wang,et al.  Interfacial strengthening by reduced graphene oxide coated with MgO in biodegradable Mg composites , 2020 .

[9]  C. Shuai,et al.  Graphene oxide assists polyvinylidene fluoride scaffold to reconstruct electrical microenvironment of bone tissue , 2020 .

[10]  L. An,et al.  High performance carbon nanotube-reinforced magnesium nanocomposite , 2020 .

[11]  C. Shuai,et al.  Strong corrosion induced by carbon nanotubes to accelerate Fe biodegradation. , 2019, Materials science & engineering. C, Materials for biological applications.

[12]  C. Wen,et al.  Magnesium matrix nanocomposites for orthopedic applications: A review from mechanical, corrosion, and biological perspectives. , 2019, Acta biomaterialia.

[13]  P. Roy,et al.  Mg-3Zn/HA Biodegradable Composites Synthesized via Spark Plasma Sintering for Temporary Orthopedic Implants , 2019, Journal of Materials Engineering and Performance.

[14]  M. T. Parizi,et al.  Synergetic effect of GNPs and MgOs on the mechanical properties of Mg–Sr–Ca alloy , 2019, Materials Science and Engineering: A.

[15]  M. Gupta,et al.  Significantly enhancing the strength + ductility combination of Mg-9Al alloy using multi-walled carbon nanotubes , 2019, Journal of Alloys and Compounds.

[16]  R. Soltani,et al.  Development of HA-CNTs composite coating on AZ31 magnesium alloy by cathodic electrodeposition. Part 1: Microstructural and mechanical characterization , 2019, Ceramics International.

[17]  B. Wang,et al.  3D honeycomb nanostructure-encapsulated magnesium alloys with superior corrosion resistance and mechanical properties , 2019, Composites Part B: Engineering.

[18]  H. Ghayour,et al.  In Vitro Degradation, Antibacterial Activity and Cytotoxicity of Mg-3Zn-xAg Nanocomposites Synthesized by Mechanical Alloying for Implant Applications , 2019, Journal of Materials Engineering and Performance.

[19]  C. Wen,et al.  Carbon Nanotubes and Graphene as Nanoreinforcements in Metallic Biomaterials: a Review , 2019, Advanced biosystems.

[20]  Xiaojian Wang,et al.  Influence of a MAO + PLGA coating on biocorrosion and stress corrosion cracking behavior of a magnesium alloy in a physiological environment , 2019, Corrosion Science.

[21]  Wei Sun,et al.  Utilisation of propyl gallate as a novel selective collector for diaspore flotation , 2019, Minerals Engineering.

[22]  A. V. Radhamani,et al.  CNT-reinforced metal and steel nanocomposites: A comprehensive assessment of progress and future directions , 2018, Composites Part A: Applied Science and Manufacturing.

[23]  C. Shuai,et al.  Microstructure, biodegradation, antibacterial and mechanical properties of ZK60-Cu alloys prepared by selective laser melting technique , 2018, Journal of Materials Science & Technology.

[24]  Yongxian Huang,et al.  Strengthening and toughening mechanisms of CNTs/Mg-6Zn composites via friction stir processing , 2018, Materials Science and Engineering: A.

[25]  A. Sorour,et al.  Investigation on the Controlled Degradation and Invitro Mineralization of Carbon Nanotube Reinforced AZ31 Nanocomposite in Simulated Body Fluid , 2018, Metals and Materials International.

[26]  P. Roy,et al.  Mechanical, corrosion and biocompatibility behaviour of Mg-3Zn-HA biodegradable composites for orthopaedic fixture accessories. , 2018, Journal of the mechanical behavior of biomedical materials.

[27]  Haipeng Li,et al.  Carbon nanotube-reinforced mesoporous hydroxyapatite composites with excellent mechanical and biological properties for bone replacement material application. , 2017, Materials science & engineering. C, Materials for biological applications.

[28]  H. Imai,et al.  The influence of CNTs on the microstructure and ductility of CNT/Mg composites , 2016 .

[29]  C. Shuai,et al.  Mechanical and structural characterization of diopside scaffolds reinforced with graphene , 2016 .

[30]  Y. Liu,et al.  Microstructure and mechanical properties of AZ91 alloy reinforced by carbon nanotubes coated with MgO , 2016 .

[31]  D. Zander,et al.  Influence of Ca and Zn on the microstructure and corrosion of biodegradable Mg–Ca–Zn alloys , 2015 .

[32]  M. Gupta,et al.  Development of high performance Mg–TiO2 nanocomposites targeting for biomedical/structural applications , 2015 .

[33]  J. Robson,et al.  Influence of orientation on twin nucleation and growth at low strains in a magnesium alloy , 2014 .

[34]  E. S. Kayali,et al.  Fabrication and characterization of carbon nanotube reinforced magnesium matrix composites , 2014 .

[35]  Wei Liu,et al.  Effect of solidification on microstructures and mechanical properties of carbon nanotubes reinforced magnesium matrix composite , 2014 .

[36]  M. Mehrali,et al.  Mechanical properties and biomedical applications of a nanotube hydroxyapatite-reduced graphene oxide composite , 2014 .

[37]  Weiweng Zhang,et al.  Microstructure evolution during high strain rate tensile deformation of a fine-grained AZ91 magnesium alloy , 2014 .

[38]  J. Umeda,et al.  Quantitative evaluation of initial galvanic corrosion behavior of CNTs reinforced Mg–Al alloy , 2013 .

[39]  S. Hussain,et al.  Effect of graphene nanoplatelets (GNPs) addition on strength and ductility of magnesium-titanium alloys , 2013 .

[40]  Y. Liu,et al.  Effects of carbon nanotubes on the microstructure and mechanical properties of the wrought Mg–2.0Zn alloy , 2013 .

[41]  K. Rhee,et al.  In situ synthesis of CNTs in Mg powder at low temperature for fabricating reinforced Mg composites , 2013 .

[42]  M. Gupta,et al.  Investigation into tensile and compressive responses of Mg–ZnO composites , 2012 .

[43]  J. Umeda,et al.  Fabrication of magnesium based composites reinforced with carbon nanotubes having superior mechanical properties , 2011 .

[44]  M. Gupta,et al.  Enhanced compressive response of hybrid Mg–CNT nano-composites , 2011, Journal of Materials Science.

[45]  J. Chan,et al.  Addition of CNTs to enhance tensile/compressive response of magnesium alloy ZK60A , 2011 .

[46]  K. Hong,et al.  Comparative property study on extruded Mg–HAP and ZM61–HAP composites , 2010 .

[47]  H. Imai,et al.  Microstructural and mechanical analysis of carbon nanotube reinforced magnesium alloy powder composites , 2010 .

[48]  W. Zhou,et al.  Effect of carbon nanotubes on corrosion of Mg-CNT composites , 2010 .

[49]  E. Zhang,et al.  Biocorrosion properties and blood and cell compatibility of pure iron as a biodegradable biomaterial , 2010, Journal of materials science. Materials in medicine.

[50]  Yang Song,et al.  Research on an Mg-Zn alloy as a degradable biomaterial. , 2010, Acta biomaterialia.

[51]  J. Luong,et al.  The effect of carbon nanotube aspect ratio and loading on the elastic modulus of electrospun poly(vinyl alcohol)-carbon nanotube hybrid fibers , 2009 .

[52]  R. Singer,et al.  Improved processing of carbon nanotube/magnesium alloy composites , 2009 .

[53]  Frank Witte,et al.  Degradable biomaterials based on magnesium corrosion , 2008 .

[54]  M. Gupta,et al.  Increasing significantly the failure strain and work of fracture of solidification processed AZ31B using nano-Al2O3 particulates , 2008 .

[55]  M. Gupta,et al.  Ductility improvement and fatigue studies in Mg-CNT nanocomposites , 2008 .

[56]  Yufeng Zheng,et al.  The development of binary Mg-Ca alloys for use as biodegradable materials within bone. , 2008, Biomaterials.

[57]  Tadashi Kokubo,et al.  How useful is SBF in predicting in vivo bone bioactivity? , 2006, Biomaterials.

[58]  Hui Hu,et al.  Bone cell proliferation on carbon nanotubes. , 2006, Nano letters.

[59]  R. Ruoff,et al.  Tensile loading of ropes of single wall carbon nanotubes and their mechanical properties , 2000, Physical review letters.