Effect of URANS and Hybrid RANS-Large Eddy Simulation Turbulence Models on Unsteady Turbulent Flows Inside a Side Channel Pump

In this work, the unsteady Reynolds-averaged Navier–Stokes (URANS) and three hybrid Reynolds-averaged Navier–Stokes-large eddy simulation (RANS-LES) models are employed to resolve the vortical flows in a typical single-stage side channel pump, to evaluate the suitability of these advanced turbulence models in predicting the pump hydraulic performance and unstable swirling flows. By the comparison of the overall performance, it can be observed that the results obtained by scale-adapted simulation (SAS) are closer to test data than shear stress transport (SST), detached eddy simulation (DES) and filter-based model (FBM). Simultaneously, the distribution of axial velocity on the plane near the interface is used to describe the position and intensity of internal fluid exchange between impeller and side channel. It is obvious that the intensity of mass flow exchange is strong near the inner and outer edges. Then, the vortex core region illustrates that the vortex is easily produced near the interface due to internal fluid exchange. Finally, the evolutions of circumferential in-plane vortical structures are presented to further account for the process of fluid exchange and the main vortex flows. It reveals that the recirculation flow presents a strong instability during 6–7 blade pitches as the fluid enters into the impeller and the flow is stable in downstream 7–8 blade pitches. Besides, the flow turns to be unsteady near outlet affected by the sudden change of fluid direction. This work could provide some suggestions for the choice of appropriate turbulence model in simulating strong swirling flows.

[1]  Majeed Koranteng Osman,et al.  Transient flow characterization in energy conversion of a side channel pump under different blade suction angles , 2018, Energy.

[2]  Martin Böhle,et al.  Evaluation of the Flow Inside a Side Channel Pump by the Application of an Analytical Model and CFD , 2009 .

[3]  Kwang‐Yong Kim,et al.  Evaluation of Rotor–Stator Interface Models for the Prediction of the Hydraulic and Suction Performance of a Centrifugal Pump , 2019, Journal of Fluids Engineering.

[4]  Strategies for turbulence modelling and simulations , 2000 .

[5]  D. K. Walters,et al.  Numerical study of gas-cyclone airflow: an investigation of turbulence modelling approaches , 2014 .

[6]  Fan Zhang,et al.  Performance Prediction Based on Effects of Wrapping Angle of a Side Channel Pump , 2019 .

[7]  Martin Böhle,et al.  Study of the Losses in Fluid Machinery with the Help of Entropy , 2016 .

[8]  K. Hanjalic,et al.  Vortical structures and pressure pulsations in draft tube of a Francis-99 turbine at part load: RANS and hybrid RANS/LES analysis , 2017 .

[9]  Gunther Brenner,et al.  Unsteady CFD simulations of a pump in part load conditions using scale-adaptive simulation , 2010 .

[10]  Florian R. Menter,et al.  A Scale-Adaptive Simulation Model using Two-Equation Models , 2005 .

[11]  Guo-yu Wang,et al.  Numerical simulation unsteady cloud cavitating flow with a filter-based density correction model , 2014 .

[12]  Matthew Stickland,et al.  A One-Dimensional Numerical Model for the Momentum Exchange in Regenerative Pumps , 2011 .

[13]  Zhiyi Yu,et al.  Detached-eddy simulation for time-dependent turbulent cavitating flows , 2012 .

[14]  Jian Wang,et al.  Assessment of a turbulence model for numerical predictions of sheet-cavitating flows in centrifugal pumps? , 2013 .

[15]  Majeed Koranteng Osman,et al.  Effects of the geometrical conditions on the performance of a side channel pump: A review , 2018 .

[16]  Wei Shyy,et al.  Time‐dependent turbulent cavitating flow computations with interfacial transport and filter‐based models , 2005 .

[17]  Shuliang Cao,et al.  Numerical study on characteristics of unsteady flow in a centrifugal pump volute at partial load condition , 2015 .

[18]  Shouqi Yuan,et al.  Effect of suction side blade profile on the performance of a side channel pump , 2016 .

[19]  Ning Zhang,et al.  Influence of the Blade Trailing Edge Profile on the Performance and Unsteady Pressure Pulsations in a Low Specific Speed Centrifugal Pump , 2016 .

[20]  Zuchao Zhu,et al.  Effects of flow pattern on hydraulic performance and energy conversion characterisation in a centrifugal pump , 2020 .

[21]  Herbert H. Tackett,et al.  Positive Displacement Reciprocating Pump Fundamentals - Power And Direct Acting Types , 2008 .

[22]  F. Menter.  ZONAL TWO EQUATION k-w TURBULENCE MODELS FOR AERODYNAMIC FLOWS , 1993 .

[23]  Robert F. Kunz,et al.  UNSTEADY RANS AND DETACHED EDDY SIMULATIONS OF CAVITATING FLOW OVER A HYDROFOIL , 2003 .

[24]  Vasudeva K Karanth,et al.  Numerical Study of a Self Priming Regenerative Pump for Improved Performance using Geometric Modifications , 2015 .

[25]  Abraham Engeda,et al.  A modified theory for the flow mechanism in a regenerative flow pump , 2003 .

[26]  F. Menter,et al.  Ten Years of Industrial Experience with the SST Turbulence Model , 2003 .

[27]  Xiaoyu Yang,et al.  Large Eddy Simulation for Turbines: Methodologies, Cost and Future Outlooks , 2014 .

[28]  Ling Zhou,et al.  A hybrid RANS/LES model for simulating time-dependent cloud cavitating flow around a NACA66 hydrofoil , 2016 .

[29]  Desheng Zhang,et al.  Study on unsteady tip leakage vortex cavitation in an axial-flow pump using an improved filter-based model , 2017 .

[30]  Jianping Yuan,et al.  Numerical and Experimental Analysis of Flow Phenomena in a Centrifugal Pump Operating Under Low Flow Rates , 2015 .

[31]  Zvonimir Guzović,et al.  Performances and Flow Analysis in the Centrifugal Vortex Pump , 2013 .

[32]  Helmut Benigni,et al.  Maximum Efficiency Despite Lowest Specific Speed—Simulation and Optimisation of a Side Channel Pump , 2019, International Journal of Turbomachinery, Propulsion and Power.

[33]  Wei Shyy,et al.  Filter-based unsteady RANS computations , 2004 .

[34]  R. Spence,et al.  A CFD parametric study of geometrical variations on the pressure pulsations and performance characteristics of a centrifugal pump. , 2009 .

[35]  Li Deyou,et al.  Unsteady simulation and analysis for hump characteristics of a pump turbine model , 2015 .

[36]  Fan Honggang,et al.  Numerical analysis of non-axisymmetric flow characteristic for a pump-turbine impeller at pump off-design condition , 2018 .

[37]  David B. Parker.  Positive Displacement Pumps - Performance And Application , 1994 .

[38]  Yuming Wang,et al.  Cavitation flow simulation for a centrifugal pump at a low flow rate , 2013 .

[39]  T Meakhail,et al.  An improved theory for regenerative pump performance , 2005 .

[40]  Robert R. Ross,et al.  Centrifugal Pumps: Design and Application , 1985 .

[41]  Florian R. Menter,et al.  The Scale-Adaptive Simulation Method for Unsteady Turbulent Flow Predictions. Part 1: Theory and Model Description , 2010 .

[42]  Jun Liu,et al.  Unsteady flow characteristics regarding hump instability in the first stage of a multistage pump-turbine in pump mode , 2018, Renewable Energy.

[43]  Christian Hasse,et al.  Detached eddy simulation of cyclic large scale fluctuations in a simplified engine setup , 2009 .

[44]  Ji Pei,et al.  Clocking effect of vaned diffuser on hydraulic performance of high-power pump by using the numerical flow loss visualization method , 2019, Energy.

[45]  Martin Böhle,et al.  A Systematical Study of the Influence of Blade Length, Blade Width, and Side Channel Height on the Performance of a Side Channel Pump , 2015 .

[46]  B. Chaouat.  The State of the Art of Hybrid RANS/LES Modeling for the Simulation of Turbulent Flows , 2017, Flow, turbulence and combustion.

[47]  Martin Böhle,et al.  A Systematical Study of the Influence of Blade Number on the Performance of a Side Channel Pump , 2019, Journal of Fluids Engineering.