On the use of optical fiber Bragg grating (FBG) sensor technology for strain modal analysis

This paper discusses the use of optical fiber Bragg grating (FBG) strain sensors for structural dynamics measurements. For certain industrial applications, there is an interest to use strain sensors rather than or in combination with accelerometers for experimental modal analysis. Classical electrical strain gauges can be used hereto, but optical strain sensors are an interesting alternative with some very specific advantages. This paper gives an overview of dynamic strain measurements in industrial applications, discusses the benefits of FBG sensors and reviews their measurement principle. Finally, the concept of strain modal analysis is introduced and a helicopter main rotor blade vibration testing and analysis case study is presented.

[1]  Henrik Wentzel,et al.  Fatigue test load identification using weighted modal filtering based on stress , 2013 .

[2]  Chiara Grappasonni,et al.  Development of a FBG based distributed strain sensor system for wind turbine structural health monitoring , 2013 .

[3]  Joris Degrieck,et al.  Strain Measurements of Composite Laminates with Embedded Fibre Bragg Gratings: Criticism and Opportunities for Research , 2010, Sensors.

[4]  B. Peeters,et al.  Contact Versus Non-Contact Measurement of a Helicopter Main Rotor Composite Blade , 2010 .

[5]  Jae-Hung Han,et al.  Estimation of dynamic structural displacements using fiber Bragg grating strain sensors , 2007 .

[6]  Li Sun,et al.  Dynamic response measurement of offshore platform model by FBG sensors , 2007 .

[7]  Li Cheng,et al.  Determination of dynamic strain profile and delamination detection of composite structures using embedded multiplexed fibre-optic sensors , 2004 .

[8]  K. Park,et al.  A Theory for Strain-Based Structural System Identification , 2001 .

[9]  T. Uhl,et al.  Strain Modal Testing of a Helicopter Tail Boom , 1998 .

[10]  Herman Van der Auweraer,et al.  Validation of modal filtering/editing approach to dynamic fatigue analysis , 1993 .

[11]  Paul Sas,et al.  Case study of fracture of a mechanical component due to resonance fatigue , 1990 .

[12]  Wim Desmet,et al.  Strain-Based Dynamic Measurements and Modal Testing , 2014 .

[13]  P. Guillaume,et al.  The PolyMAX Frequency-Domain Method: A New Standard for Modal Parameter Estimation? , 2004 .

[14]  Steven Dubowsky,et al.  DISPLACEMENTS IN A VIBRATING BODY BY STRAIN GAUGE MEASUREMENTS , 2000 .

[15]  E. Haugse,et al.  Using Modal Test Results to Develop Strain to Displacement Transformations , 1995 .

[16]  E. Széchényi,et al.  The measurement of blade deflections - A new implementation of the strain pattern analysis , 1992 .