Three-dimensional spray–flow interaction in a spark-ignition direct-injection engine

Large efforts are currently being made toward improving internal combustion engine efficiency without degrading overall performance. To this end, advanced combustion strategies that require in-cylinder fuel/air mixtures to be prepared with unprecedented care and exactness are being implemented. Spray-guided stratified-charge operation is an example of one such strategy that offers high efficiency under light-load operation but requires precise fuel injector and combustion chamber design to ensure robust engine performance. Understanding the mixture formation processes aids in the success of such strategies and is therefore an important goal for internal combustion engine research. Direct visualization via optical diagnostics remains one of the most powerful tools for gaining insight into in-cylinder mixing processes, such as liquid fuel spray atomization. Although substantial efforts have been made over the last few decades to develop and implement liquid fuel spray diagnostics in the challenging in-cylinder environment, such techniques have been almost exclusively two-dimensional or too complex to be used regularly in design practices. Only now are practical, commercially available three-dimensional visualization technologies beginning to mature to a level for which they can be adapted to perform in-cylinder diagnostics. In this study, the three-dimensional fuel spray structure and its variations are visualized by a single plenoptic camera in an optically accessible spark-ignition direct-injection engine. The engine is operated under a variety of conditions relevant to conventional homogeneous-charge and spray-guided stratified-charge engine strategies. The spray and flow field interaction under different bulk flow conditions as well as engine speeds are clearly discernable in the instantaneous three-dimensional spray images, establishing the imaging technique as a viable and unique new tool for complex three-dimensional engine in-cylinder processes research.

[1]  Min Xu,et al.  Cycle-to-cycle variation analysis of early flame propagation in engine cylinder using proper orthogonal decomposition , 2014 .

[2]  Min Xu,et al.  Proper orthogonal decomposition analysis of fuel spray structure variation in a spark-ignition direct-injection optical engine , 2014, Experiments in Fluids.

[3]  Edward H. Adelson,et al.  Single Lens Stereo with a Plenoptic Camera , 1992, IEEE Trans. Pattern Anal. Mach. Intell..

[4]  A. Dreizler,et al.  In-Cylinder Flow and Fuel Spray Interactions in a Stratified Spray-Guided Gasoline Engine Investigated by High-Speed Laser Imaging Techniques , 2013 .

[5]  Volker Sick,et al.  Plenoptic Single-Shot 3D Imaging of In-Cylinder Fuel Spray Geometry , 2015 .

[6]  G. Lippmann,et al.  Epreuves reversibles. Photographies integrals , 1908 .

[7]  Volker Sick,et al.  Volume-resolved flame chemiluminescence and laser-induced fluorescence imaging , 2013 .

[8]  Hiromistu Ando,et al.  A Keynote on Future Combustion Engines , 2001 .

[9]  Volker Sick,et al.  Investigation of the fuel injection, mixing and combustion processes in an SIDI engine using Quasi-3D LIF imaging , 2003 .

[10]  P. Hanrahan,et al.  Light Field Photography with a Hand-held Plenoptic Camera , 2005 .

[11]  Volker Sick,et al.  High speed imaging in fundamental and applied combustion research , 2013 .

[12]  Volker Sick,et al.  Invited Review: Combustion instability in spray-guided stratified-charge engines: A review , 2015 .

[13]  Ulrich Spicher,et al.  Potential of spray-guided gasoline direct injection for reduction of fuel consumption and simultaneous compliance with stricter emissions regulations , 2013 .

[14]  Bengt Johansson,et al.  Application of a high-repetition-rate laser diagnostic system for single-cycle-resolved imaging in internal combustion engines. , 2002, Applied optics.

[15]  Jeffrey A. Fessler,et al.  Model-based image reconstruction of chemiluminescence using a plenoptic 2.0 camera , 2015, 2015 IEEE International Conference on Image Processing (ICIP).

[16]  John L. Lumley,et al.  Engines: An Introduction , 1999 .

[17]  Volker Sick,et al.  Cycle-Resolved Investigation of In-Cylinder and Exhaust NO in a Spray-Guided Gasoline Direct-Injection Engine: Effect of Intake Temperature and Simulated Exhaust Gas Recirculation , 2005 .

[18]  Lennart Wietzke,et al.  Single lens 3D-camera with extended depth-of-field , 2012, Electronic Imaging.

[19]  A. Dreizler,et al.  Early flame propagation in a spark-ignition engine measured with quasi 4D-diagnostics , 2015 .

[20]  Michael Wensing,et al.  Fuel property and fuel temperature effects on internal nozzle flow, atomization and cyclic spray fluctuations of a direct injection spark ignition–injector , 2013 .

[21]  U. Spicher,et al.  A New Approach for Three-Dimensional High-Speed Combustion Diagnostics in Internal Combustion Engines , 2006 .

[22]  Fred W. Bowditch,et al.  A New Tool for Combustion Research A Quartz Piston Engine , 1961 .

[23]  V. Sick,et al.  Simultaneous flow field and fuel concentration imaging at 4.8 kHz in an operating engine , 2009 .

[24]  Min Xu,et al.  ANALYZING THE CYCLE-TO-CYCLE VARIATIONS OF PULSING SPRAY CHARACTERISTICS BY MEANS OF THE PROPER ORTHOGONAL DECOMPOSITION , 2013 .

[25]  D. Michaelis,et al.  Investigation of the 3D flow field in an IC engine using tomographic PIV , 2013 .

[26]  Volker Sick,et al.  Inhomogeneities in HCCI Combustion: An Imaging Study , 2005 .

[27]  Manolis Gavaises,et al.  CAVITATION INSIDE ENLARGED AND REAL-SIZE FULLY TRANSPARENT INJECTOR NOZZLES AND ITS EFFECT ON NEAR NOZZLE SPRAY FORMATION , 2011 .

[28]  V. Sick,et al.  On the ignition and flame development in a spray-guided direct-injection spark-ignition engine , 2014 .