Conformable liquid metal printed epidermal electronics for smart physiological monitoring and simulation treatment

Conformable epidermal printed electronics enabled from gallium-based liquid metals (LMs), highly conductive and low-melting-point alloys, are proposed as the core to achieving immediate contact between skin surface and electrodes, which can avoid the skin deformation often caused by conventional rigid electrodes. When measuring signals, LMs can eliminate resonance problems with shorter time to reach steady state than Pt and gelled Pt electrodes. By comparing the contact resistance under different working conditions, it is demonstrated that both ex vivo and in vivo LM electrode–skin models have the virtues of direct and immediate contact with skin surface without the deformation encountered with conventional rigid electrodes. In addition, electrocardio electrodes composed of conformable LM printed epidermal electronics are adopted as smart devices to monitor electrocardiogram signals of rabbits. Furthermore, simulation treatment for smart defibrillation offers a feasible way to demonstrate the effect of liquid metal electrodes (LMEs) on the human body with less energy loss. The remarkable features of soft epidermal LMEs such as high conformability, good conductivity, better signal stability, and fine biocompatibility represent a critical step towards accurate medical monitoring and future smart treatments.

[1]  Yan-Jun Chen,et al.  Experiment and simulation of natural convection heat transfer of transformer oil under electric field , 2017 .

[2]  E. Morallón,et al.  A stretchable and screen-printed electrochemical sensor for glucose determination in human perspiration. , 2017, Biosensors & bioelectronics.

[3]  Abbas Barfidokht,et al.  Wearable Flexible and Stretchable Glove Biosensor for On-Site Detection of Organophosphorus Chemical Threats. , 2017, ACS sensors.

[4]  Rebecca K. Kramer,et al.  Liquid Metal Switches for Environmentally Responsive Electronics , 2017 .

[5]  Jing Liu,et al.  Recent Advancements in Liquid Metal Flexible Printed Electronics: Properties, Technologies, and Applications , 2016, Micromachines.

[6]  Jun Li,et al.  Electrical stimulation towards melanoma therapy via liquid metal printed electronics on skin , 2016, Clinical and Translational Medicine.

[7]  G. Walcott,et al.  Minor Variations in Electrode Pad Placement Impact Defibrillation Success , 2016, Prehospital emergency care : official journal of the National Association of EMS Physicians and the National Association of State EMS Directors.

[8]  E. Brown,et al.  Development of magnetic liquid metal suspensions for magnetohydrodynamics , 2015, 1512.02575.

[9]  Zhen Gu,et al.  Transformable liquid-metal nanomedicine , 2015, Nature Communications.

[10]  Q. Wang,et al.  Fast Fabrication of Flexible Functional Circuits Based on Liquid Metal Dual‐Trans Printing , 2015, Advanced materials.

[11]  Yonggang Huang,et al.  Epidermal devices for noninvasive, precise, and continuous mapping of macrovascular and microvascular blood flow , 2015, Science Advances.

[12]  Ryosuke Matsuzaki,et al.  Highly Stretchable, Global, and Distributed Local Strain Sensing Line Using GaInSn Electrodes for Wearable Electronics , 2015 .

[13]  M. Krenn,et al.  Correction: Dynamic Impedance Model of the Skin-Electrode Interface for Transcutaneous Electrical Stimulation , 2015, PloS one.

[14]  M. Krenn,et al.  Dynamic Impedance Model of the Skin-Electrode Interface for Transcutaneous Electrical Stimulation , 2015, PloS one.

[15]  J. M. Nóbrega,et al.  Development of polymer wicks for the fabrication of bio-medical sensors. , 2015, Materials science & engineering. C, Materials for biological applications.

[16]  Klas Hjort,et al.  Tape Transfer Atomization Patterning of Liquid Alloys for Microfluidic Stretchable Wireless Power Transfer , 2015, Scientific Reports.

[17]  Lin Jia,et al.  Epidermal photonic devices for quantitative imaging of temperature and thermal transport characteristics of the skin , 2014, Nature Communications.

[18]  Cangran Guo,et al.  Rapidly patterning conductive components on skin substrates as physiological testing devices via liquid metal spraying and pre-designed mask. , 2014, Journal of materials chemistry. B.

[19]  Xian Huang,et al.  Stretchable, wireless sensors and functional substrates for epidermal characterization of sweat. , 2014, Small.

[20]  Rebecca K. Kramer,et al.  Direct Writing of Gallium‐Indium Alloy for Stretchable Electronics , 2014 .

[21]  James P. Wissman,et al.  Rapid Prototyping for Soft‐Matter Electronics , 2014 .

[22]  Jing Liu,et al.  Liquid-solid phase transition alloy as reversible and rapid molding bone cement. , 2013, Biomaterials.

[23]  Jing Liu,et al.  Injectable 3-D Fabrication of Medical Electronics at the Target Biological Tissues , 2013, Scientific Reports.

[24]  R. Ideker,et al.  Evaluation of Acute Cardiac and Chest Wall Damage after Shocks with a Subcutaneous Implantable Cardioverter Defibrillator in Swine , 2013, Pacing and clinical electrophysiology : PACE.

[25]  Jari Hyttinen,et al.  Effect of pressure and padding on motion artifact of textile electrodes , 2013, Biomedical engineering online.

[26]  Jing Liu,et al.  Biomedical Implementation of Liquid Metal Ink as Drawable ECG Electrode and Skin Circuit , 2013, PloS one.

[27]  Qin Zhang,et al.  Direct writing of electronics based on alloy and metal (DREAM) ink: A newly emerging area and its impact on energy, environment and health sciences , 2012 .

[28]  Magnus Jobs,et al.  Liquid alloy printing of microfluidic stretchable electronics. , 2012, Lab on a chip.

[29]  Lei He,et al.  Electroactive SWNT/PEGDA hybrid hydrogel coating for bio-electrode interface. , 2011, Colloids and surfaces. B, Biointerfaces.

[30]  T. Krupenkin,et al.  Reverse electrowetting as a new approach to high-power energy harvesting , 2011, Nature communications.

[31]  Zhigang Wu,et al.  A Microfluidic, Reversibly Stretchable, Large‐Area Wireless Strain Sensor , 2011 .

[32]  Xuetao Shi,et al.  Performance Evaluation of Five Types of Ag/AgCl Bio-Electrodes for Cerebral Electrical Impedance Tomography , 2011, Annals of Biomedical Engineering.

[33]  Frank Padberg,et al.  Skin lesions after treatment with transcranial direct current stimulation (tDCS) , 2008, Brain Stimulation.

[34]  H. Shimizu.  Shimizu's textbook of dermatology , 2007 .

[35]  S. C. Bera,et al.  An experimental analysis of the non-linear behaviour of a bio-electrode polarisation impedance with excitation frequency , 2004 .

[36]  Damijan Miklavcic,et al.  Finite-element modeling of needle electrodes in tissue from the perspective of frequent model computation , 2003, IEEE Transactions on Biomedical Engineering.

[37]  H. Kim,et al.  Characterization of platinum electrode using unbalanced magnetic field sputter for implantable biomedical applications , 2003 .

[38]  Andrew J. Pullan,et al.  Comparison of potential- and activation-based formulations for the inverse problem of electrocardiology , 2003, IEEE Transactions on Biomedical Engineering.

[39]  John A Rogers,et al.  Theoretical and Experimental Studies of Epidermal Heat Flux Sensors for Measurements of Core Body Temperature , 2016, Advanced healthcare materials.

[40]  Mihailo P. Lazarević,et al.  Modeling of Bioimpedance for Human Skin Based on Fractional Distributed- Order Modified Cole Model , 2014 .

[41]  Feng-qi Wu,et al.  [Clinical features, mutation of the GNAS1 and pathogenesis of progressive osseous heteroplasia]. , 2012, Zhonghua er ke za zhi = Chinese journal of pediatrics.

[42]  Nicolelis Mal,et al.  State-of-the-Art Microwire Array Design for Chronic Neural Recordings in Behaving Animals -- Methods for Neural Ensemble Recordings , 2008 .

[43]  T. P. Aleksandrova,et al.  Submicron regeneration of the working surface of indicator electrodes : Regeneration of metal electrodes , 1997 .