Microstructural evolution of tin nanoparticles during in situ sodium insertion and extraction.

The microstructural changes and phase transformations of tin nanoparticles during electrochemical sodiation were studied with a nanosized sodium ion battery using in situ transmission electron microscopy. It was found that the first sodiation process occurred in two steps; that is, the crystalline Sn nanoparticles were initially sodiated via a two-phase mechanism with a migrating phase boundary to form a Na-poor, amorphous Na(x)Sn alloy (x ~ 0.5), which was further sodiated to several Na-rich amorphous phases and finally to the crystallized Na(15)Sn(4) (x = 3.75) via a single-phase mechanism. The volumetric expansion was about 60% in the first step and 420% after the second step. However, despite the huge expansion, cracking or fracture was not observed, which is attributed to the second step of the single-phase sodiation that accommodates large portion of the sodiation-induced stress over the entire particle. Excellent cyclability was also observed during the reversible sodiation/desodiation cycles, showing great potential of Sn nanoparticles as a robust electrode material for rechargeable batteries.

[1]  S. T. Picraux,et al.  In situ atomic-scale imaging of electrochemical lithiation in silicon. , 2012, Nature nanotechnology.

[2]  Xiaofeng Qian,et al.  Lithiation-induced embrittlement of multiwalled carbon nanotubes. , 2011, ACS nano.

[3]  J. Dahn,et al.  Anomalous, high-voltage irreversible capacity in tin electrodes for lithium batteries , 2003 .

[4]  Chunsheng Wang,et al.  Sponge-like porous carbon/tin composite anode materials for lithium ion batteries , 2012 .

[5]  D. Stevens,et al.  The Mechanisms of Lithium and Sodium Insertion in Carbon Materials , 2001 .

[6]  Mark N. Obrovac,et al.  Structural changes in silicon anodes during lithium insertion/extraction , 2004 .

[7]  Yang Liu,et al.  Anisotropic swelling and fracture of silicon nanowires during lithiation. , 2011, Nano letters.

[8]  Mark N. Obrovac,et al.  Reversible Insertion of Sodium in Tin , 2012 .

[9]  John P. Sullivan,et al.  Lithium Fiber Growth on the Anode in a Nanowire Lithium Ion Battery During Charging , 2011 .

[10]  Nae-Lih Wu,et al.  A study on the interior microstructures of working Sn particle electrode of Li-ion batteries by in situ X-ray transmission microscopy , 2010 .

[11]  R. Asher.  A LAMELLAR COMPOUND OF SODIUM AND GRAPHITE , 1959 .

[12]  John P. Sullivan,et al.  Ultrafast electrochemical lithiation of individual Si nanowire anodes. , 2011, Nano letters.

[13]  Hui Xiong,et al.  Amorphous TiO2 Nanotube Anode for Rechargeable Sodium Ion Batteries , 2011 .

[14]  S. T. Picraux,et al.  Reversible nanopore formation in Ge nanowires during lithiation-delithiation cycling: an in situ transmission electron microscopy study. , 2011, Nano letters.

[15]  Shigeto Okada,et al.  Electrochemical Properties of NaTi2(PO4)3 Anode for Rechargeable Aqueous Sodium-Ion Batteries , 2011 .

[16]  M. Fouletier,et al.  Electrochemical intercalation of sodium in graphite , 1988 .

[17]  Donghan Kim,et al.  Sodium‐Ion Batteries , 2013 .

[18]  Jian Yu Huang,et al.  Size-dependent fracture of silicon nanoparticles during lithiation. , 2011, ACS nano.

[19]  P. Moreau,et al.  Valence electron energy-loss spectroscopy of silicon negative electrodes for lithium batteries. , 2010, Physical chemistry chemical physics : PCCP.

[20]  Teófilo Rojo,et al.  Na-ion batteries, recent advances and present challenges to become low cost energy storage systems , 2012 .

[21]  Jian Yu Huang,et al.  In situ TEM electrochemistry of anode materials in lithium ion batteries , 2011 .

[22]  Yalin Lu,et al.  Synthesis of Hierarchical Hollow-Structured Single-Crystalline Magnetite (Fe3O4) Microspheres: The Highly Powerful Storage versus Lithium as an Anode for Lithium Ion Batteries , 2012 .

[23]  Chunsheng Wang,et al.  Electrochemical Performance of Porous Carbon/Tin Composite Anodes for Sodium‐Ion and Lithium‐Ion Batteries , 2013 .

[24]  B. Scrosati,et al.  Lithium batteries: Status, prospects and future , 2010 .

[25]  Y. Chiang.  Building a Better Battery , 2010, Science.

[26]  Nae-Lih Wu,et al.  Study on Microstructural Deformation of Working Sn and SnSb Anode Particles for Li-Ion Batteries by in Situ Transmission X-ray Microscopy , 2011 .

[27]  John P. Sullivan,et al.  In Situ Observation of the Electrochemical Lithiation of a Single SnO2 Nanowire Electrode , 2010, Science.

[28]  Jean-Marie Tarascon,et al.  In situ Scanning Electron Microscopy (SEM) observation of interfaces within plastic lithium batteries , 1998 .

[29]  Ting Zhu,et al.  In Situ TEM Experiments of Electrochemical Lithiation and Delithiation of Individual Nanostructures , 2012 .

[30]  Gerbrand Ceder,et al.  Challenges for Na-ion Negative Electrodes , 2011 .

[31]  Yang Liu,et al.  In situ transmission electron microscopy observation of pulverization of aluminum nanowires and evolution of the thin surface Al2O3 layers during lithiation-delithiation cycles. , 2011, Nano letters.

[32]  Candace K. Chan,et al.  High-performance lithium battery anodes using silicon nanowires. , 2008, Nature nanotechnology.

[33]  J. Dahn,et al.  Study of the Reactivity of Na/Hard Carbon in Different Solvents and Electrolytes , 2011 .

[34]  J. Tour,et al.  In situ transmission electron microscopy of electrochemical lithiation, delithiation and deformation of individual graphene nanoribbons , 2012 .

[35]  Mark N. Obrovac,et al.  Alloy Design for Lithium-Ion Battery Anodes , 2007 .

[36]  J. Dahn,et al.  NaCrO2 is a Fundamentally Safe Positive Electrode Material for Sodium-Ion Batteries with Liquid Electrolytes , 2012 .