Displacement Monitoring and Analysis of Expansion Joints of Long-Span Steel Bridges with Viscous Dampers

AbstractThe often-reported premature failures of expansion joints of long-span steel bridges call for a better understanding of their performance in service conditions. This paper presents the long-term monitoring and analysis of displacements of expansion joints, with emphasis on the influence of viscous dampers that were installed to mitigate seismic responses of the bridges. Data from the three long-span steel bridges in China—the Sutong Bridge, the Runyang Suspension Bridge, and the Jiangyin Bridge—are compared. Decomposition of displacement signals in various frequency bands reveals that temperature-induced movements contribute to only a small portion of the total cumulative displacements. Because of the small but rapid movements caused by vehicle/wind loads, the cumulative displacements of long-span steel bridges may far exceed those caused by temperature changes. According to the monitoring data, the existence of viscous dampers may reduce the vehicle/wind-induced displacements but have no signific...

[1]  Charles Seim,et al.  Innovative Seismic Retrofit of Steel Bridges: Some Examples , 2000 .

[2]  Luh-Maan Chang,et al.  EVALUATION OF PERFORMANCE OF BRIDGE DECK EXPANSION JOINTS , 2002 .

[3]  Aftab A. Mufti,et al.  Structural Health Monitoring of Innovative Canadian Civil Engineering Structures , 2002 .

[4]  Yi-Qing Ni,et al.  Assessment of Bridge Expansion Joints Using Long-Term Displacement and Temperature Measurement , 2007 .

[5]  W.H.A. Peelen,et al.  Dynamics of modular expansion joints: The Martinus Nijhoff Bridge , 2013 .

[6]  María Ofelia Moroni,et al.  DYNAMIC CHARACTERISTICS OF CHILEAN BRIDGES WITH SEISMIC PROTECTION , 2005 .

[7]  Michaël J.M.M. Steenbergen,et al.  Dynamic response of expansion joints to traffic loading , 2004 .

[8]  Yi-Qing Ni,et al.  Structural health monitoring and intelligent vibration control of cable-supported bridges: Research and application , 2003 .

[9]  Ove Sørensen,et al.  Design for movements in bridges , 2007 .

[10]  Jorge de Brito,et al.  Inspection survey of 150 expansion joints in road bridges , 2009 .

[11]  R. S. Jangid,et al.  Passive hybrid systems for earthquake protection of cable-stayed bridge , 2007 .

[12]  Guo Tong,et al.  Fatigue Life Prediction of Welded Joints in Orthotropic Steel Decks Considering Temperature Effect and Increasing Traffic Flow , 2008 .

[13]  Chung C. Fu,et al.  Investigation of Bridge Expansion Joint Failure Using Field Strain Measurement , 2011 .

[14]  Eric Ancich,et al.  Dynamic Anomalies in a Modular Bridge Expansion Joint , 2006 .

[15]  Cole C. McDaniel,et al.  Influence of Dampers on Seismic Response of Cable-Supported Bridge Towers , 2007 .

[16]  Kai-Yuen Wong,et al.  Instrumentation and health monitoring of cable‐supported bridges , 2004 .

[17]  Ming L. Wang,et al.  Temperature effects on cable stayed bridge using health monitoring system: a case study , 2011 .

[18]  C. W Roeder,et al.  Fatigue and dynamic load measurements on modular expansion joints , 1998 .