A mathematical method for ergonomic-based design: placement

A rigorous mathematical formulation for ergonomic design based on obtaining and visualizing the workspace of human limbs is herein presented. The methodology and formulation presented in this paper are aimed at placing the human with respect to specified targets, whereby optimizing a given human performance measure. These measures are developed as mathematical cost functions that can be maximized or minimized. For example, as a result of this analysis, a method for placing the human operator relative to the controls in an assembly line while minimizing the person's stress at each joint can be achieved. Other cost functions such as maximizing reachability or maximizing dexterity are considered. The method is characterized by two steps: (1) determine the boundary envelope (also called reach envelope) of a human limb in closed form as, and, (2) move the workspace envelope towards optimizing the cost function while satisfying all constraints. By defining a new position and orientation of the limb's workspace with respect to the target points, it is possible to establish an ergonomic design that satisfies the given constraints. The strengths of this method are in its ability to visualize the placement-reach design problem and in its broadly applicable mathematical formulation well suited for computer implementation. Furthermore, because the ergonomic design problem is indeed an optimization process, the use of optimization techniques in this work lends itself to addressing other standing problems. The formulation and code are demonstrated using a number of examples.

[1]  Max Donath,et al.  Locating assembly tasks in a manipulator's workspace , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[2]  Homayoun Seraji.  Reachability analysis for base placement in mobile manipulators , 1995, J. Field Robotics.

[3]  Eui S. Jung,et al.  Prediction of human reach posture using a neural network for ergonomic man models , 1994 .

[4]  Jasbir S. Arora,et al.  Introduction to Optimum Design , 1988 .

[5]  K Abdelmalek,et al.  Criterion for the Locality of a Manipulator Arm with Respect to an Operating Point , 1996 .

[6]  B. Goh,et al.  Trajectory-following algorithms for min-max optimization problems , 1992 .

[7]  J. P. Sadler,et al.  Optimal location of robot trajectories for minimization of actuator torque , 1993 .

[8]  Karim Abdel-Malek,et al.  Local dexterity analysis for open kinematic chains , 2000 .

[9]  L. W. Tsai,et al.  Robot Analysis: The Mechanics of Serial and Parallel Ma-nipulators , 1999 .

[10]  Evangelos Papadopoulos,et al.  On manipulator posture planning for large force tasks , 1995, Proceedings of 1995 IEEE International Conference on Robotics and Automation.

[11]  Saïd Zeghloul,et al.  Optimal placement of robotic manipulators using multiple kinematic criteria , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[12]  Stephan Konz.  Workstation organization and design , 1990 .

[13]  J. Munkres,et al.  Calculus on Manifolds , 1965 .

[14]  J. Denavit,et al.  A kinematic notation for lower pair mechanisms based on matrices , 1955 .

[15]  Edward J. Haug,et al.  On the determination of boundaries to manipulator workspaces , 1997 .

[16]  Don B. Chaffin.  Human Simulation Modeling—Will it Improve Ergonomics during Design? , 1997 .

[17]  Eui Seung Jung,et al.  Psychophysical Cost Function of Joint Movement for Arm Reach Posture Prediction , 1994 .

[18]  Johan F.M. Molenbroek.  Reach Envelopes of Older Adults , 1998 .

[19]  J. Rastegar,et al.  Determination of Allowable Manipulator Link Shapes; and Task, Installation, and Obstacle Spaces Using the Monte Carlo Method , 1993 .

[20]  Saïd Zeghloul,et al.  Multi-criteria optimal placement of robots in constrained environments , 1993, Robotica.

[21]  S. Zeghloul,et al.  On the optimal placement and task compatibility of manipulators , 1991, Fifth International Conference on Advanced Robotics 'Robots in Unstructured Environments.

[22]  Karim Abdel-Malek,et al.  Analytical Boundary of the Workspace for General3-DOF Mechanisms , 1997, Int. J. Robotics Res..

[23]  Bruno Siciliano,et al.  Modeling and Control of Robot Manipulators , 1995 .

[24]  Min K. Chung,et al.  Reach Posture Prediction of Upper Limb for Ergonomic Workspace Evaluation , 1992 .

[25]  Tao Xiong,et al.  A combined SVM and LDA approach for classification , 2005, Proceedings. 2005 IEEE International Joint Conference on Neural Networks, 2005..

[26]  Fritz B. Prinz,et al.  Optimal path placement for kinematically redundant manipulators , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[27]  Eros Gian Alessandro Pasero,et al.  Artificial neural networks and the simulation of human movements in CAD environments , 1997, Proceedings of International Conference on Neural Networks (ICNN'97).

[28]  Karim Abdel-Malek,et al.  Workspace, Void, and Volume Determination of the General 5DOF Manipulator , 1999 .

[29]  J. Richards,et al.  The measurement of human motion: A comparison of commercially available systems , 1999 .

[30]  Eros Gian Alessandro Pasero,et al.  A recurrent network for data driven human movement generation , 1998, 1998 IEEE International Joint Conference on Neural Networks Proceedings. IEEE World Congress on Computational Intelligence (Cat. No.98CH36227).

[31]  Yung-chen Lu.  Singularity Theory and an Introduction to Catastrophe Theory , 1980 .

[32]  John T. Feddema.  Kinematically optimal robot placement for minimum time coordinated motion , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[33]  Zhiming Ji,et al.  Identification of placement parameters for modular platform manipulators , 1999 .

[34]  Eui S. Jung,et al.  A man-machine interface model with improved visibility and reach functions , 1996 .

[35]  Xudong Zhang,et al.  Development of Dynamic Simulation Models of Seated Reaching Motions While Driving , 1997 .