Ethylene–propylene–diene terpolymer/hexa fluoropropylene–vinylidinefluoride dipolymer rubber blends: Thermal and mechanical properties

[1]  N. K. Sinha,et al.  Development of fluorocarbon rubber for backup seals of sodium cooled fast breeder reactor , 2011 .

[2]  K. El‐Nemr.  Effect of different curing systems on the mechanical and physico-chemical properties of acrylonitrile butadiene rubber vulcanizates , 2011 .

[3]  H. Ismail,et al.  The effects of electron beam irradiation on the thermal properties, fatigue life and natural weathering of styrene butadiene rubber/recycled acrylonitrile–butadiene rubber blends , 2011 .

[4]  A. Khalf,et al.  Effect of grafting cellulose acetate and methylmethacrylate as compatibilizer onto NBR/SBR blends , 2010 .

[5]  M. R. Bayoumi,et al.  The influence of CB loading on thermal aging resistance of SBR and NBR rubber compounds under different aging temperature , 2009 .

[6]  A. Bhowmick,et al.  Dynamic viscoelastic properties of fluoroelastomer/clay nanocomposites , 2007 .

[7]  A. S. Sirqueira,et al.  The Effect of Functionalized Ethylene Propylene Diene Rubber (EPDM) on the Kinetics of Sulfur Vulcanization of Normal Rubber/EPDM Blends , 2007 .

[8]  B. Karaağaç,et al.  Thermal stability of butyl/EPDM/neoprene based rubber compounds , 2007 .

[9]  S. Turri,et al.  Dynamic mechanical and rheological behavior of fluoroelastomer-organoclay nanocomposites obtained from different preparation methods , 2006 .

[10]  Dajun Chen,et al.  Thermal and mechanical properties of dough modeling compound reinforced ethylene propylene diene monomer/silicon rubber composites , 2006 .

[11]  Søren Hvilsted,et al.  An investigation on changes in chemical properties of pure ethylene-propylene-diene rubber in aqueous acidic environments , 2006 .

[12]  S. Hvilsted,et al.  Chemical degradation of an uncrosslinked pure fluororubber in an alkaline environment , 2004 .

[13]  Swapnadip De,et al.  Dependence of physical properties and processing behavior of blends of silicone rubber and fluororubber on blend morphology , 2004 .

[14]  G. C. Sarti,et al.  Permeation, diffusion, and sorption of dimethyl ether in fluoroelastomers , 2004 .

[15]  P. Kingshott,et al.  Chemical degradation of fluoroelastomer in an alkaline environment , 2004 .

[16]  B. Boutevin,et al.  Poly-silafluoroalkyleneoligosiloxanes: a class of fluoroelastomers with low glass transition temperature , 2003 .

[17]  A. Bhowmick,et al.  Acrylic rubber‐fluorocarbon rubber miscible blends: Effect of curatives and fillers on cure, mechanical, aging, and swelling properties , 2003 .

[18]  Sabu Thomas,et al.  Studies on the thermal stability of natural rubber/polystyrene interpenetrating polymer networks: thermogravimetric analysis , 2001 .

[19]  B. Améduri,et al.  Fluoroelastomers: synthesis, properties and applications , 2001 .

[20]  I. S. Kolesov,et al.  Untersuchung der Segmentbewegung in Polybutylenterephthalat/Polycarbonat-Blends mittels der Thermisch Stimulierten Depolarisationsstrom-Methode , 1999 .

[21]  A. Bhowmick,et al.  Thermal degradation studies of electron beam cured terpolymeric fluorocarbon rubber , 1999 .

[22]  N. Schneider,et al.  Sorption and diffusion of organic vapors in two fluoroelastomers , 1999 .

[23]  T. K. Chaki,et al.  Thermogravimetric studies on miscible blends of ethylene-methyl acrylate copolymer (EMA) and polydimethylsiloxane rubber (PDMS) , 1993 .

[24]  N. Peppas,et al.  Anomalous penetrant transport in glassy polymers: 4. Stresses in partially swollen polymers , 1987 .

[25]  M. Shaw,et al.  Rheology of polymer blends: Simultaneous slippage and entrance pressure loss in the ethylene‐propylene‐diene (EPDM)/viton system , 1982 .

[26]  M. Porter.  Structural Characterization of Filled Vulcanizates Part 1. Determination of the Concentration of Chemical Crosslinks in Natural Rubber Vulcanizates Containing High Abrasion Furnace Black , 1967 .

[27]  P. Flory,et al.  Statistical Mechanics of Cross‐Linked Polymer Networks I. Rubberlike Elasticity , 1943 .

[28]  J. Donnet,et al.  Reinforcement of Elastomers by Particulate Fillers , 2013 .

[29]  W. Ying,et al.  Properties of fluoroelastomer-graft-maleic anhydride compatibilized fluoroelastomer/thermoplastic polyurethane blends , 2009 .

[30]  A. Bhowmick,et al.  Structure and properties of some novel fluoroelastomer/clay nanocomposites with special reference to their interaction , 2006 .

[31]  A. Bhowmick,et al.  Thermal ageing, degradation and swelling of acrylate rubber, fluororubber and their blends containing polyfunctional acrylates , 2003 .

[32]  G. Kraus,et al.  Reinforcement of Elastomers by Particulate Fillers , 1994 .

[33]  A. W. Coats,et al.  Kinetic Parameters from Thermogravimetric Data , 1964, Nature.