Comparative analysis of eddy current pulsed thermography and long pulse thermography for damage detection in metals and composites

Abstract Eddy current pulsed thermography (ECPT) and long pulse thermography (LPT) are two emerging non-destructive evaluation techniques that have been recently used for sub-surface defect detection in both metallic and composite components. This paper provides a comparative analysis of these two methods by focussing on the detection of flat bottom holes (FBHs) in both aluminium and carbon fibre reinforced plastic samples. Principal component analysis was used for the post-processing of thermal data in order to enhance the detection of FBHs with various diameters and depths. Results showed that LPT had a better performance for detecting FBHs in low-thermally conductive materials such as carbon fibre-reinforced thermoplastic composites, whilst ECPT revealed a superior performance for detecting FBHs in materials with higher thermal and electrical conductivity such as aluminium.

[1]  W. L. Woo,et al.  Physical interpretation and separation of eddy current pulsed thermography , 2013 .

[2]  Francesco Ciampa,et al.  Recent Advances in Active Infrared Thermography for Non-Destructive Testing of Aerospace Components , 2018, Sensors.

[3]  Zijun Wang,et al.  Image processing based quantitative damage evaluation in composites with long pulse thermography , 2018, NDT & E International.

[4]  Feilu Luo,et al.  Defect characterisation using pulsed eddy current thermography under transmission mode and NDT applications , 2012 .

[5]  Nik Rajic,et al.  Principal component thermography for flaw contrast enhancement and flaw depth characterisation in composite structures , 2002 .

[6]  Stephen D. Holland,et al.  The sources of heat generation in vibrothermography , 2011 .

[7]  G. Schmitt,et al.  Non‐destructive indication of delaminations under thick organic coatings using active IR‐thermography , 2017 .

[8]  Guiyun Tian,et al.  Comparison of Nondestructive Testing Methods on Detection of Delaminations in Composites , 2012, J. Sensors.

[9]  Xiaoli Jiang,et al.  Image processing algorithms for crack detection in welded structures via pulsed eddy current thermal imaging , 2017, IEEE Instrumentation & Measurement Magazine.

[10]  Francesco Ciampa,et al.  Nonlinear air-coupled thermosonics for fatigue micro-damage detection and localisation , 2018, NDT & E International.

[11]  Gui Yun Tian,et al.  CRACK DETECTION USING PULSED EDDY CURRENT STIMULATED THERMOGRAPHY , 2011 .

[12]  Beate Oswald-Tranta,et al.  Induction Thermography for Surface Crack Detection and Depth Determination , 2018 .

[13]  Gui Yun Tian,et al.  Low energy impact damage detection in CFRP using eddy current pulsed thermography , 2016 .

[14]  Francesco Ciampa,et al.  Imaging of Barely Visible Impact Damage on a Complex Composite Stiffened Panel Using a Nonlinear Ultrasound Stimulated Thermography Approach , 2017 .

[15]  Xiaoli Jiang,et al.  Method for detecting damage in carbon-fibre reinforced plastic-steel structures based on eddy current pulsed thermography , 2018 .

[16]  T. Takagi,et al.  Detection of delamination in laminated CFRP composites using eddy current testing: Simulation and experimental study , 2018 .

[17]  Darryl P Almond,et al.  Long pulse excitation thermographic non-destructive evaluation , 2017 .

[18]  Gui Yun Tian,et al.  Quantitative evaluation of angular defects by pulsed eddy current thermography , 2010 .

[19]  Darryl P Almond,et al.  Thermographic NDE advisory and guidance system , 2016 .

[20]  Baldev Raj,et al.  Quantification of defects in composites and rubber materials using active thermography , 2012 .

[21]  Ricky S. Reusser,et al.  Material Evaluation by Infrared Thermography , 2016 .

[22]  A. Bendada,et al.  Comparative Study of Active Thermography Techniques for the Nondestructive Evaluation of Honeycomb Structures , 2009 .

[23]  Martin Johnston,et al.  Variational Bayesian Subgroup Adaptive Sparse Component Extraction for Diagnostic Imaging System , 2018, IEEE Transactions on Industrial Electronics.

[24]  Sheng Chen,et al.  Nonlinear Process Fault Diagnosis Based on Serial Principal Component Analysis , 2018, IEEE Transactions on Neural Networks and Learning Systems.

[25]  Takahide Sakagami,et al.  Applications of pulse heating thermography and lock-in thermography to quantitative nondestructive evaluations , 2002 .

[26]  Kenneth Frogner,et al.  Induction heating of carbon fiber composites: Investigation of electrical and thermal properties , 2017 .

[27]  Yoshiro Suzuki,et al.  Visualization and size estimation of fiber waviness in multidirectional CFRP laminates using eddy current imaging , 2016 .

[28]  Yunze He,et al.  Eddy Current Pulsed Thermography with Different Excitation Configurations for Metallic Material and Defect Characterization , 2016, Sensors.