Continuous processing gains importance in the fine chemical and pharmaceutical industries where crystallization is an important downstream operation. Seeded cooling crystallization of the l-alanine/water system was investigated under similar conditions, i.e., temperature interval, cooling rate, and seed material, both in a stirred batch vessel and in a continuous plug flow crystallizer in the coiled flow inverter (CFI) design with horizontal helical tube coils (ID = 4 mm) and frequent 90° bends of the coils. Short-cut calculations based on characteristic time scales and the Damkohler number allow for comparing the batch and continuous crystallization processes. The experimental results reveal crystal growth and growth rate dispersion to be dominating on the product crystal size distribution (CSD). However, at low flow rates of approximately 31 g min–1, a moving sediment flow of the slurry was present in the CFI crystallizer, resulting in further size dispersion effects. Elevated flow rates of approximatel...