Ship structural safety and reliability

Recent research and development in the area of design methodologies related to safety and reliability of ship structures is reviewed, focusing on some relevant probabilistic approaches used for the load and resistance factor design (LRFD) of ship hulls against collapse. Important insights and findings previously obtained in the literature are summarized, and recommendations are made with respect to both technologically improved design procedures and those needed for future development.

[1]  Alaa E. Mansour.  Methods of Computing the Probability of Failure Under Extreme Values of Bending Moment , 1972 .

[2]  Jeom Kee Paik,et al.  Ship hull ultimate strength reliability considering corrosion , 1998 .

[3]  Alaa E. Mansour,et al.  PROBABILITY-BASED SHIP STRUCTURAL SAFETY ANALYSIS , 1994 .

[4]  Norio Yamamoto,et al.  A Study on the Degradation of Coating and Corrosion of Ship’s Hull Based on the Probabilistic Approach , 1998 .

[5]  P A Frieze,et al.  TIME VARIANT RELIABILITY ANALYSIS OF A MOBILE OFFSHORE UNIT , 1993 .

[6]  C. Guedes Soares,et al.  Reliability assessment of maintained ship hulls with correlated corroded elements , 1997 .

[7]  Bilal M. Ayyub,et al.  Uncertainty in Strength Models for Marine Structures. , 1994 .

[8]  박영일,et al.  유조선 종강도부재의 확률론적 부식속도 예측모델의 개발 , 1998 .

[9]  Robert E. Melchers,et al.  Structural Reliability: Analysis and Prediction , 1987 .

[10]  Alaa E. Mansour.  An Introduction to Structural Reliability Theory , 1989 .

[11]  T Jastrzebski,et al.  RESULT - A COMPUTER CODE FOR EVALUATION OF THE ULTIMATE LONGITUDINAL STRENGTH OF HULL GIRDER , 1995 .

[12]  Paul H. Wirsching,et al.  Reliability with respect to ultimate strength of a corroding ship hull , 1997 .

[13]  Robert Løseth,et al.  ECONOMICS OF HIGH-TENSILE STEEL IN SHIP HULLS , 1994 .

[14]  Tetsuya Yao,et al.  Progressive Collapse Analysis of a Ship's Hull under Longitudinal Bending (2nd Report) , 1992 .

[15]  Jeom Kee Paik,et al.  Simple Assessment of Post-Grounding Loads And Strengh of Ships , 1997 .

[16]  José Manuel Gordo,et al.  Approximate Assessment of the Ultimate Longitudinal Strength of the Hull Girder , 1996 .

[17]  Enrico Rizzuto,et al.  Second-level reliability analysis of a double-hull oil tanker , 1998 .

[18]  C. Guedes Soares,et al.  Time-dependent reliability of the primary ship structure , 1989 .

[19]  Jerome P. Sikora,et al.  A METHOD FOR ESTIMATING LIFETIME LOADS AND FATIGUE LIVES FOR SWATH AND CONVENTIONAL MONOHULL SHIPS , 1983 .

[20]  Bilal M. Ayyub,et al.  RELIABILITY METHODS FOR SHIP STRUCTURES , 1985 .

[21]  Jeom Kee Paik.  Tensile Behavior of Local Members on Ship Hull Collapse , 1994 .

[22]  C. Guedes Soares,et al.  Reliability-Based Design of the Primary Structure of Oil Tankers , 1997 .

[23]  C. Guedes Soares,et al.  Structural reliability of two bulk carrier designs , 2000 .

[24]  Jeom Kee Paik,et al.  Probabilistic corrosion rate estimation model for longitudinal strength members of bulk carriers , 1998 .

[25]  Alaa E. Mansour,et al.  A simple formulation for predicting the ultimate strength of ships , 1995 .

[26]  C. Östergaard.  Partial Safety Factors for Vertical Bending Loads on Containerships , 1992 .

[27]  Alaa E. Mansour,et al.  Sensitivity factors and their application to marine structures , 1995 .

[28]  B. Ayyub,et al.  Practical Structural Reliability Techniques , 1984 .

[29]  C. Guedes Soares,et al.  Reliability of maintained ship hulls subjected to corrosion and fatigue under combined loading , 1996 .

[30]  Yaofeng Chen.  Strength of ship hull girders under moment, shear and torque, M.S. thesis, 1982. , 1982 .

[31]  T. Radko.  Ship waves in a stratified fluid , 2001 .

[32]  Alaa E. Mansour,et al.  Reliability-based method for optimal structural design of stiffened panels , 1997 .

[33]  Mobile Units,et al.  Practical design of ships and mobile units : Proceedings of PRADS'95 -- the 6th international symposium on Practical Design of Ships and Mobile Units, Seoul, Korea, 17-22 September 1995 , 1995 .

[34]  E. Nikolaidis,et al.  Uncertainties in Stress Analysis on Marine Structures , 1991 .

[35]  Robert S. Dow.  TESTING AND ANALYSIS OF A 1/3-SCALE WELDED STEEL FRIGATE MODEL , 1991 .