On improving reliability of delay based Physically Unclonable Functions under temperature variations

Physically Unclonable Functions (PUFs) are a special class of circuits used for challenge-response authentication. The challenge-response pair for PUFs should be mathematically unpredictable, but must be reliable and remain unvarying. The reliability of PUFs implemented in CMOS circuits is frequently compromised by environmental conditions such as voltage and temperature. In this paper, we propose two methods for improving the reliability of delay based PUFs, by reducing temperature sensitivity. The first method focuses on improving the gate overdrive (VGS − Vt(T)), by operating the PUF at an optimized supply voltage (V′DD), also called as ZTC (Zero Temperature Coefficient) voltage. The optimum supply voltage for a 24 stage PUF is almost 23% lower than the nominal supply voltage in 45nm CMOS technology. The second method exploits the negative temperature coefficient (TCR) property of n+ and p+ polysilicon placed as source feedback resistors. A 16% improvement in reliability has been demonstrated for both the methods. Moreover, we also demonstrate that these design optimizations do not compromise the PUF uniqueness.

[1]  Ahmad-Reza Sadeghi,et al.  Reconfigurable Physical Unclonable Functions - Enabling technology for tamper-resistant storage , 2009, 2009 IEEE International Workshop on Hardware-Oriented Security and Trust.

[2]  G. Edward Suh,et al.  Extracting secret keys from integrated circuits , 2005, IEEE Transactions on Very Large Scale Integration (VLSI) Systems.

[3]  Stephen A. Benton,et al.  Physical one-way functions , 2001 .

[4]  Y. Tsividis.  Operation and modeling of the MOS transistor , 1987 .

[5]  Leyla Nazhandali,et al.  Circuit-level techniques for reliable Physically Uncloneable Functions , 2009, 2009 IEEE International Workshop on Hardware-Oriented Security and Trust.

[6]  Ying Su,et al.  A Digital 1.6 pJ/bit Chip Identification Circuit Using Process Variations , 2008, IEEE Journal of Solid-State Circuits.

[7]  Paul Ampadu,et al.  Normal and Reverse Temperature Dependence in Variation-Tolerant Nanoscale Systems with High-k Dielectrics and Metal Gates , 2008, NanoNet.

[8]  Mark Mohammad Tehranipoor,et al.  Novel Physical Unclonable Function with process and environmental variations , 2010, 2010 Design, Automation & Test in Europe Conference & Exhibition (DATE 2010).

[9]  Daniel E. Holcomb,et al.  Power-Up SRAM State as an Identifying Fingerprint and Source of True Random Numbers , 2009, IEEE Transactions on Computers.

[10]  Paul Ampadu,et al.  Temperature-Robust Performance Yield through Supply Voltage Selection , 2007, 2007 IEEE International Symposium on Circuits and Systems.

[11]  V. Kursun,et al.  Temperature Variation Insensitive Energy Efficient CMOS Circuits in a 65nm CMOS Technology , 2006, 2006 49th IEEE International Midwest Symposium on Circuits and Systems.

[12]  Volkan Kursun,et al.  Supply and Threshold Voltage Optimization for Temperature Variation Insensitive Circuit Performance: A Comparison , 2006, 2006 IEEE International SOC Conference.

[13]  G.-J. Schrijen,et al.  Physical Unclonable Functions and Public-Key Crypto for FPGA IP Protection , 2007, 2007 International Conference on Field Programmable Logic and Applications.

[14]  G. Edward Suh,et al.  Physical Unclonable Functions for Device Authentication and Secret Key Generation , 2007, 2007 44th ACM/IEEE Design Automation Conference.

[15]  Jorge Guajardo,et al.  Extended abstract: The butterfly PUF protecting IP on every FPGA , 2008, 2008 IEEE International Workshop on Hardware-Oriented Security and Trust.

[16]  Leonid Bolotnyy,et al.  Physically Unclonable Function-Based Security and Privacy in RFID Systems , 2007, Fifth Annual IEEE International Conference on Pervasive Computing and Communications (PerCom'07).

[17]  Sheng-Fu Tsai,et al.  Temperature-dependent characteristics of polysilicon and diffused resistors , 2003 .

[18]  V. Kursun,et al.  Voltage optimization for temperature variation insensitive CMOS circuits , 2005, 48th Midwest Symposium on Circuits and Systems, 2005..

[19]  H. Chan,et al.  The temperature dependence of threshold voltages in submicrometer CMOS , 1985, IEEE Electron Device Letters.

[20]  Daniel E. Holcomb,et al.  Low-power sub-threshold design of secure physical unclonable functions , 2010, 2010 ACM/IEEE International Symposium on Low-Power Electronics and Design (ISLPED).

[21]  S. Devadas,et al.  Design and Implementation of PUF-Based "Unclonable" RFID ICs for Anti-Counterfeiting and Security Applications , 2008, 2008 IEEE International Conference on RFID.