Combined electrochemical, heat generation, and thermal model for large prismatic lithium-ion batteries in real-time applications

[1]  Saeid Habibi,et al.  Continuous piecewise-linear, reduced-order electrochemical model for lithium-ion batteries in real-time applications , 2017 .

[2]  Songrui Wang,et al.  Entropy and heat generation of lithium cells/batteries , 2016 .

[3]  Guy Friedrich,et al.  Thermal modeling of large prismatic LiFePO4/graphite battery. Coupled thermal and heat generation models for characterization and simulation , 2015 .

[4]  Ellen Ivers-Tiffée,et al.  A novel and precise measuring method for the entropy of lithium-ion cells: ΔS via electrothermal impedance spectroscopy , 2014 .

[5]  Naoki Baba,et al.  Numerical simulation of thermal behavior of lithium-ion secondary batteries using the enhanced single particle model , 2014 .

[6]  Saeid Habibi,et al.  Li-Ion Battery SOC Estimation Using Non-Linear Estimation Strategies Based on Equivalent Circuit Models , 2014 .

[7]  Xia Wang,et al.  The Influence of Cell Temperature on the Entropic Coefficient of a Lithium Iron Phosphate (LFP) Pouch Cell , 2014 .

[8]  K. Jalkanen,et al.  Entropy change effects on the thermal behavior of a LiFePO4/graphite lithium-ion cell at different states of charge , 2013 .

[9]  Bin Wu,et al.  Examining temporal and spatial variations of internal temperature in large-format laminated battery with embedded thermocouples , 2013 .

[10]  Yi Ding,et al.  Online Parameterization of Lumped Thermal Dynamics in Cylindrical Lithium Ion Batteries for Core Temperature Estimation and Health Monitoring , 2013, IEEE Transactions on Control Systems Technology.

[11]  Ralph E. White,et al.  Extension of Physics-Based single Particle Model for Higher Charge-Discharge Rates , 2013 .

[12]  Shaohua Lin,et al.  A linear parameter-varying model for HEV/EV battery thermal modeling , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[13]  Matthew P. Castanier,et al.  Parameterization and Validation of an Integrated Electro-Thermal Cylindrical LFP Battery Model , 2012 .

[14]  S. A. Gadsden,et al.  A comparative study of Li-ion battery models and nonlinear dual estimation strategies , 2012, 2012 IEEE Transportation Electrification Conference and Expo (ITEC).

[15]  W. Shyy,et al.  Surrogate-based modeling and dimension reduction techniques for multi-scale mechanics problems , 2011 .

[16]  Miroslav Krstic,et al.  PDE model for thermal dynamics of a large Li-ion battery pack , 2011, Proceedings of the 2011 American Control Conference.

[17]  H. Fathy,et al.  Reduction of an Electrochemistry-Based Li-Ion Battery Model via Quasi-Linearization and Padé Approximation , 2011 .

[18]  A. Stefanopoulou,et al.  Lithium-Ion Battery State of Charge and Critical Surface Charge Estimation Using an Electrochemical Model-Based Extended Kalman Filter , 2010 .

[19]  Dinh Vinh Do,et al.  Thermal modeling of a cylindrical LiFePO4/graphite lithium-ion battery , 2010 .

[20]  Christopher D. Rahn,et al.  Model-Based Electrochemical Estimation and Constraint Management for Pulse Operation of Lithium Ion Batteries , 2010, IEEE Transactions on Control Systems Technology.

[21]  Binggang Cao,et al.  Three-dimensional thermal finite element modeling of lithium-ion battery in thermal abuse application , 2010 .

[22]  Cheng Lin,et al.  Research on thermo-physical properties identification and thermal analysis of EV Li-ion battery , 2009, 2009 IEEE Vehicle Power and Propulsion Conference.

[23]  Ralph E. White,et al.  Reduction of Model Order Based on Proper Orthogonal Decomposition for Lithium-Ion Battery Simulations , 2009 .

[24]  Giovanni Fiengo,et al.  Lithium-ion battery state of charge estimation with a Kalman Filter based on a electrochemical model , 2008, 2008 IEEE International Conference on Control Applications.

[25]  Ralph E. White,et al.  Thermal Model for a Li-Ion Cell , 2008 .

[26]  M. Dubarry,et al.  Incremental Capacity Analysis and Close-to-Equilibrium OCV Measurements to Quantify Capacity Fade in Commercial Rechargeable Lithium Batteries , 2006 .

[27]  Min Chen,et al.  Accurate electrical battery model capable of predicting runtime and I-V performance , 2006, IEEE Transactions on Energy Conversion.

[28]  V. Subramanian,et al.  Efficient Macro-Micro Scale Coupled Modeling of Batteries , 2005 .

[29]  Gregory L. Plett,et al.  Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs Part 1. Background , 2004 .

[30]  Gregory L. Plett,et al.  Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs: Part 3. State and parameter estimation , 2004 .

[31]  Gregory L. Plett,et al.  Extended Kalman filtering for battery management systems of LiPB-based HEV battery packs: Part 2. Modeling and identification , 2004 .

[32]  Ann Marie Sastry,et al.  Analytical approximation of the percolation threshold for overlapping ellipsoids of revolution , 2004, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[33]  Ann Marie Sastry,et al.  Two-Dimensional vs. Three-Dimensional Clustering and Percolation in Fields of Overlapping Ellipsoids , 2004 .

[34]  Georg Brasseur,et al.  Modeling of high power automotive batteries by the use of an automated test system , 2003, IEEE Trans. Instrum. Meas..

[35]  J. Newman,et al.  Heats of mixing and of entropy in porous insertion electrodes , 2003 .

[36]  J. Newman,et al.  Thermal Modeling of Porous Insertion Electrodes , 2003 .

[37]  M. Verbrugge,et al.  Electrochemical and Thermal Characterization of Battery Modules Commensurate with Electric Vehicle Integration , 2002 .

[38]  Yo Kobayashi,et al.  Electrochemical and calorimetric approach to spinel lithium manganese oxide , 1999 .

[39]  Chaoyang Wang,et al.  Micro‐Macroscopic Coupled Modeling of Batteries and Fuel Cells I. Model Development , 1998 .

[40]  Ralph E. White,et al.  Determination of the hydrogen diffusion coefficient in metal hydrides by impedance spectroscopy , 1998 .

[41]  M. Doyle,et al.  Simulation and Optimization of the Dual Lithium Ion Insertion Cell , 1994 .

[42]  M. Doyle,et al.  Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell , 1993 .

[43]  John Newman,et al.  A General Energy Balance for Battery Systems , 1984 .