Pilot deployment of the LDSD parachute via a supersonic ballute

The Low Density Supersonic Decelerator (LDSD) Project required the use of a pilot system due to the inability to mortar deploy its main supersonic parachute. A mortar deployed 4.4 m diameter supersonic ram-air ballute was selected as the pilot system for its high drag coefficient and stability relative to candidate supersonic parachutes at the targeted operational Mach number of 3. The ballute underwent a significant development program that included the development of a new liquid methanol-based pre-inflation system to assist the ballute inflation process. Both pneumatic and pyrotechnic mortar tests were conducted to verify orderly rigging deployment, bag strip, inflation aid activation, and proper mortar performance. The ballute was iteratively analyzed between fluid and structural analysis codes to obtain aerodynamic and aerothermodynamic estimates as well as estimates of the ballute’s structural integrity and shape. The ballute was successfully flown in June 2014 at a Mach number of 2.73 as part of the first LDSD supersonic flight test and exhibited approximately 20% more drag than pre-flight nominal predictions. Recovery of the ballute indicated that it did not exceed its structural or thermal capabilities. This flight set a historical precent as it represented the largest ballute to have ever been successfully flown at this Mach number by a NASA entity.

[1]  W. W. Sowa,et al.  AERODYNAMIC DEPLOYABLE DECELERATOR PERFORMANCE - EVALUATION PROGRAM , 1965 .

[2]  Allen Witkowski,et al.  Parachute Decelerator System Performance During the Low Density Supersonic Decelerator Program’s First Supersonic Flight Dynamics Test , 2015 .

[3]  Deepak Bose,et al.  Aerodynamic Analysis of Next Generation Supersonic Decelerators , 2014 .

[4]  Mike Kandis,et al.  Stress Analysis of the LDSD Supersonic Ballute , 2015 .

[5]  Douglas S. Adams.  Mortar deployment extensibility for the Low Density Supersonic Decelerator parachute , 2014, 2014 IEEE Aerospace Conference.

[6]  Allen Witkowski,et al.  Verification and Validation Testing of the Parachute Decelerator System Prior to the First Supersonic Flight Dynamics Test for the Low Density Supersonic Decelerator Program , 2015 .

[7]  C. V. Eckstrom,et al.  Flight-test results from supersonic deployment of an 18-foot-diameter /5.49 meter/ towed ballute decelerator , 1969 .

[8]  Tingguang Ma,et al.  A Historical Review , 2015 .

[9]  Ian G. Clark,et al.  Computational Analysis and Post-Flight Validation of Ballute Aerodynamics , 2015 .

[10]  Robert D. Braun,et al.  A historical review of Inflatable Aerodynamic Decelerator technology development , 2010, 2010 IEEE Aerospace Conference.

[11]  N. Houtz.  Optimization of inflatable drag devices by isotensoid design , 1964 .

[12]  Allen Witkowski,et al.  LDSD Supersonic Ballute Design and Packing , 2015 .

[13]  Ashley C. Karp,et al.  Pyrotechnically Actuated Gas Generator Utilizing Aqueous Methanol , 2015 .

[14]  John C. Gallon,et al.  Rigging test bed enables development of multi-stage decelerator extraction , 2015 .