Optimization of deposition voltage of cataphoretic automotive primers assessed by EIS and AC/DC/AC

[1]  S. García,et al.  Evaluation of cure temperature effects in cataphoretic automotive primers by electrochemical techniques , 2007 .

[2]  S. García,et al.  A comparative study between the results of different electrochemical techniques (EIS and AC/DC/AC): Application to the optimisation of the cataphoretic and curing parameters of a primer for the automotive industry , 2007 .

[3]  S. García,et al.  Epoxy Powder Clearcoats Used for Anticorrosive Purposes Cured with Ytterbium III Trifluoromethanesulfonate , 2007 .

[4]  S. García,et al.  Anticorrosive properties of an epoxy-Meldrum acid cured system catalyzed by erbium III trifluromethanesulfonate , 2006 .

[5]  S. García,et al.  Application of electrochemical techniques to study the effect on the anticorrosive properties of the addition of ytterbium and erbium triflates as catalysts on a powder epoxy network , 2006 .

[6]  J. Saura,et al.  Testing the influence of the plasticizers addition on the anticorrosive properties of an epoxy primer by means of electrochemical techniques , 2004 .

[7]  J. Saura,et al.  Rapid assessment of automotive epoxy primers by electrochemical techniques , 2003 .

[8]  L. Fedrizzi,et al.  Cataphoretic and autophoretic automotive primers: A comparative study , 2003 .

[9]  C. Cao,et al.  Effect of PVC on the diffusing behavior of water through alkyd coatings , 2001 .

[10]  J. G. Ribelles,et al.  The effect of kevlar fiber reinforcement on the curing, thermal, and dynamic‐mechanical properties of an epoxy/anhydride system , 2000 .

[11]  F. Buratti,et al.  Electrochemical characterisation of organic coatings for the automotive industry , 2000 .

[12]  J. G. Ribelles,et al.  Thermal and mechanical characterization of amine-epoxy/Kevlar fibre composites , 1999 .

[13]  B. Amo,et al.  Accelerated and EIS tests for anticorrosive paints pigmented with ecological pigments , 1999 .

[14]  Omer Van der Biest,et al.  ELECTROPHORETIC DEPOSITION OF MATERIALS , 1999 .

[15]  N. Vatistas.  A new electrocoating technique to avoid cratering and increase voltage rupture , 1998 .

[16]  W. V. Ooij,et al.  Comparative EIS study of pretreatment performance in coated metals , 1997 .

[17]  B. Carlsson,et al.  Durability assessment of automotive coatings—Design and evaluation of accelerated tests , 1997 .

[18]  M. Selvaraj,et al.  Optimisation of metallic pigments in coatings by an electrochemical technique and an investigation of manganese powder as pigment for metal rich primers , 1996 .

[19]  A. Amirudin,et al.  Application of electrochemical impedance spectroscopy to study the degradation of polymer-coated metals , 1995 .

[20]  V. Mišković‐Stanković,et al.  Influence of substrate on the formation and growth kinetics of cathodic electrocoat paint , 1995 .

[21]  Florian Mansfeld,et al.  Use of electrochemical impedance spectroscopy for the study of corrosion protection by polymer coatings , 1995 .

[22]  K. Balakrishnan,et al.  The effect of the PVC/CPVC ratio on the corrosion resistance properties of organic coatings , 1994 .

[23]  F. Mansfeld.  Models for the impedance behavior of protective coatings and cases of localized corrosion , 1993 .

[24]  J. Wit,et al.  The determination of coating performance with impedance measurements-I. Coating polymer properties , 1993 .

[25]  D. Plazek,et al.  The physical properties of bisphenol-A-based epoxy resins during and after curing† , 1986 .

[26]  J. Mijovic.  Cure kinetics of neat versus reinforced epoxies , 1986 .

[27]  G. W. Walter,et al.  A review of impedance plot methods used for corrosion performance analysis of painted metals , 1986 .

[28]  H. Leidheiser,et al.  The mechanism for the cathodic delamination of organic coatings from a metal surface , 1983 .

[29]  G. Walter.  Application of impedance measurements to study performance of painted metals in aggressive solutions , 1981 .