Numerical modelling of railway ballast at the particle scale

The paper describes the development of a technique to simulate triaxial tests on specimens of railway ballast numerically at the particle scale and its validation with reference to physical test data. The ballast particles were modelled using potential particles and the well-known discrete element method. The shapes of these elemental particles, the particle size distribution and the number of particles (N = 2800) in each numerical triaxial specimen all matched closely to the real ballast material being modelled. Confining pressures were applied to the specimen via a dynamic triangulation of the outer particle centroids. A parametric study was carried out to investigate the effects on the simulation of timestep, strain rate, damping, contact stiffness and inter-particle friction. Finally, a set of parameters was selected that provided the best fit to experimental tri- axial data, with very close agreement of mobilized friction and volumetric strain behaviour.

[1]  Glenn R. McDowell,et al.  On the micro mechanics of one-dimensional normal compression , 2013 .

[2]  C. Thornton.  NUMERICAL SIMULATIONS OF DEVIATORIC SHEAR DEFORMATION OF GRANULAR MEDIA , 2000 .

[3]  P. Barrett.  The shape of rock particles, a critical review , 1980 .

[4]  P. Cundall,et al.  A bonded-particle model for rock , 2004 .

[5]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[6]  G. Midi,et al.  On dense granular flows , 2003, The European physical journal. E, Soft matter.

[7]  M. Coop,et al.  The influence of particle characteristics on the behaviour of coarse grained soils , 2010 .

[8]  William Powrie,et al.  Sleeper End Resistance of Ballasted Railway Tracks , 2014 .

[9]  W. Powrie,et al.  Dependence of shape on particle size for a crushed rock railway ballast , 2013 .

[10]  Francesco Calvetti,et al.  Discrete modelling of granular materials and geotechnical problems , 2008 .

[11]  Michael M. Khonsari,et al.  Granular Lubrication: Toward an Understanding of the Transition Between Kinetic and Quasi-Fluid Regime , 2004 .

[12]  J. Roux,et al.  Quasistatic rheology and the origins of strain , 2009, 0901.2846.

[13]  J. Harkness,et al.  Potential particles for the modelling of interlocking media in three dimensions , 2009 .

[14]  T. Ng.  Input Parameters of Discrete Element Methods , 2006 .

[15]  William Powrie,et al.  Numerical modelling of plane strain tests on sands using a particulate approach , 2005 .

[16]  W. Gander,et al.  Least-squares fitting of circles and ellipses , 1994 .

[17]  Katalin Bagi,et al.  An algorithm to generate random dense arrangements for discrete element simulations of granular assemblies , 2005 .

[18]  Glenn R. McDowell,et al.  Statistics of soil particle strength , 2001 .

[19]  Félix Darve,et al.  Numerical simulation of drained triaxial test using 3D discrete element modeling , 2009 .

[20]  Glenn R. McDowell,et al.  A method to model realistic particle shape and inertia in DEM , 2010 .

[21]  Sinthuja Aingaran,et al.  Experimental investigation of static and cyclic behaviour of scaled railway ballast and the effect of stress reversal , 2014 .

[22]  K. Johnson.  Contact Mechanics: Frontmatter , 1985 .

[23]  K. Pye,et al.  Particle shape: a review and new methods of characterization and classification , 2007 .

[24]  Guy T. Houlsby,et al.  Potential particles: a method for modelling non-circular particles in DEM , 2009 .

[25]  Serge Leroueil,et al.  An efficient technique for generating homogeneous specimens for DEM studies , 2003 .