Design of a scalable assembly system for product variety: a case study

Purpose – The purpose of this paper is to develop and test a design approach based on the investigation of the sensitivity of assembly systems to volume fluctuations as part of the selection process of alternative design solutions for scalable assembly systems on the basis of a real industrial case study.Design/methodology/approach – A conceptual approach for the (re‐)design of a scalable assembly system is developed on the basis of an industrial case research using axiomatic design (AD) for the top level structuring of the framework incorporating useful methods and insights obtained from a thorough literature review and from previous research work.Findings – The findings of this research are limited due to the focused nature of a case study based research. However, the obtained results encourage assuming its transferability to similar problems.Originality/value – Significant research has been done in the design of assembly systems for high product variety, but the review of literature in this field still...

[1]  R. Manzini *,et al.  Framework for designing a flexible cellular assembly system , 2004 .

[2]  Walter Eversheim,et al.  The application of axiomatic design and lean management principles in the scope of production system segmentation , 2000 .

[3]  Juhani Heilala,et al.  Modular reconfigurable flexible final assembly systems , 2001 .

[4]  Dominik Matt.  Axiomatic Design of Production Module Templates. , 2006 .

[5]  Derek Yip-Hoi,et al.  Design Principles for Machining System Configurations , 2002 .

[6]  Yoram Koren,et al.  Design of reconfigurable manufacturing systems , 2010 .

[7]  Mikell P. Groover,et al.  Automation, Production Systems, and Computer-Integrated Manufacturing , 1987 .

[8]  Tiia Vissak,et al.  Recommendations for Using the Case Study Method in International Business Research , 2010 .

[9]  Suh Nam-pyo,et al.  Complexity: Theory and Applications , 2005 .

[10]  Hmh Herman Hegge,et al.  Generic bill-of-material: a new product model , 1991 .

[11]  Roger Jianxin Jiao,et al.  Product family design and platform-based product development: a state-of-the-art review , 2007, J. Intell. Manuf..

[12]  Hui Wang,et al.  Multi-objective optimization of product variety and manufacturing complexity in mixed-model assembly systems , 2011 .

[13]  Cengiz Kahraman,et al.  Applications of axiomatic design principles: A literature review , 2010, Expert Syst. Appl..

[14]  Armin Scholl,et al.  A survey on problems and methods in generalized assembly line balancing , 2006, Eur. J. Oper. Res..

[15]  Mauro Onori,et al.  Evolvable assembly systems: coping with variations through evolution , 2008 .

[16]  Dominik T. Matt,et al.  Template based production system design , 2008 .

[17]  Anders Thorstenson,et al.  A procedure-oriented generic bill of materials , 1997 .

[18]  Juhani Heilala,et al.  Life cycle and unit-cost analysis for modular reconfigurable flexible light assembly systems , 2008 .

[19]  Yoram Koren,et al.  Scalability planning for reconfigurable manufacturing systems , 2012 .

[20]  Nam P. Suh,et al.  Axiomatic Design: Advances and Applications , 2001 .

[21]  Armin Scholl,et al.  State-of-the-art exact and heuristic solution procedures for simple assembly line balancing , 2006, Eur. J. Oper. Res..

[22]  Kaj Helin,et al.  Selecting the right system ‐ assembly system comparison with total cost of ownership methodology , 2007 .

[23]  Daniel E. Whitney.  Mechanical Assemblies: Their Design, Manufacture, and Role in Product Development [Book Review] , 2005, IEEE Robotics & Automation Magazine.

[24]  Mauro Onori,et al.  Outlook report on the future of European assembly automation , 2010 .

[25]  Jacob Rubinovitz,et al.  A weighted approach for assembly line design with station paralleling and equipment selection , 2003 .

[26]  Nils Boysen,et al.  A classification of assembly line balancing problems , 2007, Eur. J. Oper. Res..

[27]  P. Ghauri.  Designing and Conducting Case Studies in International Business Research , 2004 .

[28]  J. King.  Machine-component grouping in production flow analysis: an approach using a rank order clustering algorithm , 1980 .

[29]  Arthur C. Sanderson,et al.  A basic algorithm for the generation of mechanical assembly sequences , 1991 .

[30]  Jeonghan Ko,et al.  Balancing of manufacturing systems with complex configurations for delayed product differentiation , 2008 .

[31]  S. Yamada,et al.  Decoupling Executions in Navigating Manufacturing Processes for Shortening Lead Time and Its Implementation to an Unmanned Machine Shop , 2007 .

[32]  Dominik T. Matt,et al.  Functional periodicity as a concept for the (re-)design to agility of production systems , 2010, Prod. Eng..

[33]  Rosario Domingo,et al.  Materials flow improvement in a lean assembly line: a case study , 2007 .

[34]  A. H. Redford,et al.  Generic flexible assembly system design , 2002 .

[35]  Mohammad Kamal Uddin,et al.  An integrated approach to mixed‐model assembly line balancing and sequencing , 2010 .

[36]  Jeonghan Ko,et al.  Design of multi-product manufacturing lines with the consideration of product change dependent inter-task times, reduced changeover and machine flexibility , 2010 .

[37]  Svetan Ratchev,et al.  Towards Web‐enabled design of modular assembly systems , 2004 .

[38]  Xinjun Sheng,et al.  Modelling strategies for reconfigurable assembly systems , 2003 .

[39]  Hoda A. ElMaraghy,et al.  Assessing the structural complexity of manufacturing systems configurations , 2007 .

[40]  Roger Jianxin Jiao,et al.  A methodology of developing product family architecture for mass customization , 1999, J. Intell. Manuf..

[41]  George Chryssolouris,et al.  Assembly system design and operations for product variety , 2011 .

[42]  Osman Kulak,et al.  A complete cellular manufacturing system design methodology based on axiomatic design principles , 2005, Comput. Ind. Eng..