A NUMERICAL APPLICATION TO PREDICT THE RESISTANCE AND WAVE PATTERN OF KRISO CONTAINER SHIP

In this study, the computational results for KRISO Container Ship (KCS) are presented. CFD analyses are performed to simulate free surface flow around KCS by using RANS approach with success. Also the complicated turbulent flow zone behind the ship is well simulated. The RANS equations and the non-linear free surface boundary conditions are discretized by means of a finite volume scheme. The numerical methodology is found to be appropriate for simulating the turbulent flow around a ship in order to estimate ship total resistance and free surface. By the numerical results, total resistance is calculated for the ship model and the result is satisfactory with regard to the experimental one. As a result of well captured free surface, the wave elevation on/around the hull is compared with the experimental results.

[1]  Michael Breuer,et al.  Comparison of DES, RANS and LES for the separated flow around a flat plate at high incidence , 2003 .

[2]  V. Anantha Subramanian,et al.  Simulation of Propeller – Hull Interaction Using Ranse Solver , 2010 .

[3]  Zhi-rong Zhang.  Verification and validation for RANS simulation of KCS container ship without/with propeller , 2010 .

[4]  Heung-Won Seo,et al.  Resistance and propulsion characteristics of various commercial ships based on CFD results , 2010 .

[5]  Hua Liu,et al.  Numerical simulations of wake signatures around high-speed ships , 2014 .

[6]  Baris Barlas,et al.  NUMERICAL AND EXPERIMENTAL STUDY OF TURBULENT FREE SURFACE FLOW FOR A FAST SHIP MODEL , 2014 .

[7]  沈志荣,et al.  Numerical computations of resistance of high speed catamaran in calm water , 2014 .

[8]  Dunna Sridhar,et al.  Frictional Resistance Calculations on a Ship using CFD , 2010 .

[9]  D. H. Kim,et al.  Measurement of flows around modern commercial ship models , 2001 .

[10]  Daniele Peri,et al.  CFD validation studies for a high-speed foil-assisted semi-planing catamaran , 2011 .

[11]  Boris Bućan,et al.  Numerical Modelling of the Flow Around the Tanker Hull at Model Scale , 2008 .

[12]  Salvatore Miranda,et al.  Steady-state calculations of free surface flow around ship hulls and resistance predictions , 2011 .

[13]  Sverre Steen,et al.  Verification and validation of numerical calculation of ship resistance and flow field of a large tanker , 2013 .

[14]  Yen-Jen Chen,et al.  Numerical study on scale effect of form factor , 2009 .

[15]  Hrvoje Jasak,et al.  Rapid Free Surface Simulation for Steady-State Hull Resistance with FVM using OpenFOAM , 2014 .

[16]  Ho-Hwan Chun,et al.  Design practice for the stern hull form of a twin-skeg ship , 2009 .

[17]  Shahid Mahmood,et al.  Computational fluid dynamics based bulbous bow optimization using a genetic algorithm , 2012 .

[18]  Mehmet Atlar,et al.  Anti-slamming bulbous bow and tunnel stern applications on a novel Deep-V catamaran for improved performance , 2013 .

[19]  Stephen R. Turnock,et al.  RANS simulations of the multiphase flow around the KCS hullform , 2010 .

[20]  Joachim L. Grenestedt,et al.  Recent progress in CFD for naval architecture and ocean engineering , 2015 .

[21]  Ju Hyun Lee,et al.  Flexible CFD meshing strategy for prediction of ship resistance and propulsion performance , 2010 .

[22]  Atilla Incecik,et al.  Full-scale unsteady RANS CFD simulations of ship behaviour and performance in head seas due to slow steaming , 2015 .

[23]  O. Ubbink.  Numerical prediction of two fluid systems with sharp interfaces , 1997 .

[24]  C. Guedes Soares,et al.  Simulation of free surface flow around a VLCC hull using viscous and potential flow methods , 2009 .

[25]  Andrew G. Gerber,et al.  Unsteady analysis of the six DOF motion of a buoyantly rising submarine , 2009 .

[26]  D. Spalding,et al.  A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows , 1972 .