Relationship between measured plastic limit and plastic limit estimated from undrained shear strength, water content ratio and liquidity index

Abstract The detection of the plastic limit of clays is subject to human error. Several attempts have been made to correlate across studies the geotechnical properties of fine-grained soils (water content, liquidity index, shear strength, etc.). Based on the premise that the liquidity index and water content ratio can be correlated directly, an alternative method to obtain indirectly the plastic limit is suggested here. The present study investigated 40 natural clayey samples of various mineralogies and origins and other publicly available data, where Atterberg limits and undrained shear strength values obtained with the vane shear tests were given. The liquidity index and water-content ratio correlate very well for defined undrained shear strength values of the clays. Solving the liquidity index equation for the plastic limit, estimated plastic limit values obtained by the liquidity index/water-content ratio relationship were compared with laboratory plastic-limit values. Preliminary results based on 62 values show an exponential trend with a multiple regression coefficient of 0.79. The data need to be confirmed on a larger database, however.

[1]  Malcolm D. Bolton,et al.  The plastic limit of clays , 2013 .

[2]  M. Ohtsubo,et al.  Smectite in Marine Quick-Clays of Japan , 1982 .

[3]  Y. Wasti,et al.  Determination of the consistency limits of soils by the fall cone test , 1986 .

[4]  J. Škopek,et al.  Comparison of liquid limit values determined according to Casagrande and Vasilev , 1975 .

[5]  T. Feng,et al.  Using a Small Ring and a Fall-Cone to Determine the Plastic Limit , 2004 .

[6]  Asuri Sridharan,et al.  Water Content Ratio: An Effective Substitute for Liquidity Index for Prediction of Shear Strength of Clays , 2017, Geotechnical and Geological Engineering.

[7]  G. Rajasekaran,et al.  Physico-chemical and mineralogical studies on cochin marine clays , 1994 .

[8]  G. Towner.  AN EXAMINATION OF THE FALL‐CONE METHOD FOR THE DETERMINATION OF SOME STRENGTH PROPERTIES OF REMOULDED AGRICULTURAL SOILS , 1973 .

[9]  K. J. L. Stone,et al.  Cone penetration tests near the plastic limit , 1995 .

[10]  I L Whyte,et al.  SOIL PLASTICITY AND STRENGTH--A NEW APPROACH USING EXTRUSION , 1982 .

[11]  Jacques Locat,et al.  VISCOSITY, YIELD STRESS, REMOLDED STRENGTH, AND LIQUIDITY INDEX RELATIONSHIPS FOR SENSITIVE CLAYS , 1988 .

[12]  H. Al-Qureshi,et al.  Measuring the plasticity of clays: A review , 2011 .

[13]  J. A. Harison,et al.  Using the BS cone penetrometer for the determination of the plastic limit of soils , 1988 .

[14]  L. E. J. Norman,et al.  A Comparison of Values of liquid Limit Determined with Apparatus Having Bases of Different Hardness , 1958 .

[15]  Abidin Kaya,et al.  Prediction of cation exchange capacity from soil index properties , 2006, Clay Minerals.

[16]  L. Bjerrum,et al.  Geotechnical Properties of Norwegian Marine Clays , 1954 .

[17]  S. Ola,et al.  The geology and geotechnical properties of the black cotton soils of northeastern nigeria , 1978 .

[18]  Faïza Bergaya,et al.  Handbook of clay science , 2006 .

[19]  A. Federico,et al.  USE OF THE CONE PENETROMETER TO DETERMINE CONSISTENCY LIMITS , 1985 .

[20]  W. Busscher.  Fundamentals of Soil Behavior , 1994 .

[21]  G. Imai,et al.  RELATIONSHIPS BETWEEN VANE SHEAR STRENGTH AND WATER CONTENT FOR ULTRA SOFT CLAY GROUNDS SHOWING WATER CONTENT DECREASE WITH DEPTH , 2004 .

[22]  A. Schofield,et al.  Critical State Soil Mechanics , 1968 .

[23]  Rafael Baker,et al.  Unsaturated soil mechanics: Critical review of physical foundations , 2009 .

[24]  Guy T. Houlsby,et al.  Theory and practice of the fall cone test , 2001 .

[25]  M. Bouassida,et al.  Discussion on Tunis Soft Soil Sensitivity , 2009 .

[26]  A. W. Skemption,et al.  The Sensitivity of Clays , 1952 .

[27]  A. Sridharan,et al.  Re-examination of Undrained Strength at Atterberg Limits Water Contents , 2012, Geotechnical and Geological Engineering.

[28]  D. J. Campbell.  PLASTIC LIMIT DETERMINATION USING A DROP‐CONE PENETROMETER , 1976 .