Electrochemical and thermodynamic modeling of a CHP system using tubular solid oxide fuel cell (SOFC-CHP)

Abstract In this article, first, a CHP system using a solid oxide fuel cell (SOFC) is introduced. The influence of several effective parameters (such as cell temperature, pressure, fuel utilization coefficient, and system air-to-fuel ratio) on SOFC-CHP performance is investigated. In order to obtain an exact solution, the reforming, electrochemical and thermal models are introduced and solved simultaneously. In addition, the power and heat generation diagrams as well as the cell voltage loss under different working conditions are obtained. The results show that as temperature and pressure increase, the cell power increases; however, the temperature is more effective. Also, the results indicate an overall SOFC-CHP system efficiency of about 73%. Finally, the optimum air-to-fuel ratio and fuel utilization coefficient are determined as 9.4 and 0.85, respectively. As a final conclusion, the selection of system operating conditions must be made on the basis of the thermal and electrical needs of the specific building.

[1]  S. Chan,et al.  A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness , 2001 .

[2]  S. Singhal.  Advances in solid oxide fuel cell technology , 2000 .

[3]  Nigel P. Brandon,et al.  Optimal integration strategies for a syngas fuelled SOFC and gas turbine hybrid , 2011 .

[4]  Hasan Hüseyin Erdem,et al.  Thermodynamic model for exergetic performance of a tubular SOFC module , 2009 .

[5]  Adam Hawkes,et al.  Cost-effective operating strategy for residential micro-combined heat and power , 2007 .

[6]  Hasan Hüseyin Erdem,et al.  Exergetic performance coefficient analysis of a simple fuel cell system , 2007 .

[7]  Feridun Hamdullahpur,et al.  Effects of Fuel Processing Methods on Industrial Scale Biogas-Fuelled Solid Oxide Fuel Cell System for Operating in Wastewater Treatment Plants , 2010 .

[8]  V. Dorer,et al.  Evaluation of hydrogen and methane-fuelled solid oxide fuel cell systems for residential applications: System design alternative and parameter study , 2009 .

[9]  Adam Hawkes,et al.  Solid oxide fuel cell micro combined heat and power system operating strategy: Options for provision of residential space and water heating , 2007 .

[10]  Pegah Ghanbari Bavarsad.  Energy and exergy analysis of internal reforming solid oxide fuel cell–gas turbine hybrid system , 2007 .

[11]  H. H. Erdem,et al.  An analysis of SOFC/GT CHP system based on exergetic performance criteria , 2008 .

[12]  F. R. Foulkes,et al.  Fuel Cell Handbook , 1989 .

[13]  L. Barelli,et al.  An energeticexergetic comparison between PEMFC and SOFC-based micro-CHP systems , 2011 .

[14]  Marieke Reijalt,et al.  Hydrogen and fuel cell education in Europe: from when? And where? To here! And now! , 2010 .

[15]  M. De Paepe,et al.  Performance of combined internally reformed intermediate/ high temperature SOFC cycle compared to internally reformed two-staged intermediate temperature SOFC cycle , 2008 .

[16]  F. Hamdullahpur,et al.  Performance Evaluation of Different Configurations of Biogas-Fuelled SOFC Micro-CHP Systems for Residential Applications , 2010 .

[17]  Jeremy Hall,et al.  Innovation dynamics and environmental technologies: the emergence of fuel cell technology , 2003 .

[18]  Ali Akbar Alemrajabi,et al.  Exergy based performance analysis of a solid oxide fuel cell and steam injected gas turbine hybrid power system , 2009 .

[19]  Yixin Lu,et al.  A solid oxide fuel cell system for buildings , 2007 .

[20]  Maomao Li,et al.  Parametric analysis of solid oxide fuel cell , 2009 .

[21]  Roberto Bove,et al.  Analysis of a solid oxide fuel cell system for combined heat and power applications under non-nominal conditions , 2007 .

[22]  Jo Dewulf,et al.  Integration of Solid Oxide Fuel Cell in a sugar–ethanol factory: analysis of the efficiency and the environmental profile of the products , 2011 .

[23]  G. Naterer,et al.  Thermodynamic analysis of a combined gas turbine power system with a solid oxide fuel cell through exergy , 2008 .

[24]  Robert J. Braun,et al.  Evaluation of system configurations for solid oxide fuel cell-based micro-combined heat and power generators in residential applications , 2006 .

[25]  H. Ho,et al.  Modelling of simple hybrid solid oxide fuel cell and gas turbine power plant , 2002 .

[26]  Ali Volkan Akkaya,et al.  Electrochemical model for performance analysis of a tubular SOFC , 2007 .