Developing a fuzzy proportional–derivative controller optimization engine for engineering design optimization problems

In real world engineering design problems, decisions for design modifications are often based on engineering heuristics and knowledge. However, when solving an engineering design optimization problem using a numerical optimization algorithm, the engineering problem is basically viewed as purely mathematical. Design modifications in the iterative optimization process rely on numerical information. Engineering heuristics and knowledge are not utilized at all. In this article, the optimization process is analogous to a closed-loop control system, and a fuzzy proportional–derivative (PD) controller optimization engine is developed for engineering design optimization problems with monotonicity and implicit constraints. Monotonicity between design variables and the objective and constraint functions prevails in engineering design optimization problems. In this research, monotonicity of the design variables and activities of the constraints determined by the theory of monotonicity analysis are modelled in the fuzzy PD controller optimization engine using generic fuzzy rules. The designer only needs to define the initial values and move limits of the design variables to determine the parameters in the fuzzy PD controller optimization engine. In the optimization process using the fuzzy PD controller optimization engine, the function value of each constraint is evaluated once in each iteration. No sensitivity information is required. The fuzzy PD controller optimization engine appears to be robust in the various design examples tested.