Fabrication of polymer micro-lens array with pneumatically diaphragm-driven drop-on-demand inkjet technology.

The paper reports an effective method to fabricate micro-lens arrays with the ultraviolet-curable polymer, using an original pneumatically diaphragm-driven drop-on-demand inkjet system. An array of plano convex micro-lenses can be formed on the glass substrate due to surface tension and hydrophobic effect. The micro-lens arrays have uniform focusing function, smooth and real planar surface. The fabrication process showed good repeatability as well, fifty micro-lenses randomly selected form 9 × 9 miro-lens array with an average diameter of 333.28μm showed 1.1% variations. Also, the focal length, the surface roughness and optical property of the fabricated micro-lenses are measured, analyzed and proved satisfactory. The technique shows great potential for fabricating polymer micro-lens arrays with high flexibility, simple technological process and low production cost.

[1]  N. S. Ong,et al.  Microlens array produced using hot embossing process , 2002 .

[2]  R. F. Stevens,et al.  Review of standards for microlenses and microlens arrays , 2010 .

[3]  Jiao Guohua,et al.  Research on micro-optical lenses fabrication technology , 2007 .

[4]  Shin-Tson Wu,et al.  Flat polymeric microlens array , 2006 .

[5]  Hugo Thienpont,et al.  Two-dimensional plastic microlens arrays by deep lithography with protons: fabrication and characterization , 2002 .

[6]  N. Ngo,et al.  Low-cost and efficient coupling technique using reflowed sol-gel microlens. , 2003, Optics express.

[7]  Chih-Yuan Chang,et al.  Rapid fabrication of ultraviolet-cured polymer microlens arrays by soft roller stamping process , 2007 .

[8]  Donald J. Hayes,et al.  Microjet Printing of Micro-Optical Interconnects , 2000 .

[9]  Can Peng,et al.  High fidelity fabrication of microlens arrays by nanoimprint using conformal mold duplication and low-pressure liquid material curing , 2007 .

[10]  Hakan Urey,et al.  Design and optimization of microlens array based high resolution beam steering system. , 2007, Optics express.

[11]  Qiong-Hua Wang,et al.  Imitating micro-lens array for integral imaging , 2010 .

[12]  Chih-Yuan Chang,et al.  Fabrication of polymer microlens arrays using capillary forming with a soft mold of micro-holes array and UV-curable polymer. , 2006, Optics express.

[13]  Junfeng Xiao,et al.  Multi-materials drop-on-demand inkjet technology based on pneumatic diaphragm actuator , 2010 .

[14]  Levi A. Gheber,et al.  Tailored polymer microlenses on treated glass surfaces , 2007 .

[15]  H. Zappe,et al.  Fabrication and testing of micro-lens arrays by all-liquid techniques , 2004 .