Accuracy and Error Compensation of CNC Machining Systems
暂无分享,去创建一个
[1] Zhang Chenyang,et al. Selection and modeling of temperature variables for the thermal error compensation in servo system , 2011, IEEE 2011 10th International Conference on Electronic Measurement & Instruments.
[2] Soichi Ibaraki,et al. Vision-Based Measurement of Two-Dimensional Positioning Errors of Machine Tools , 2011 .
[3] Mark A.V. Chapman. Limitations of laser diagonal measurements , 2003 .
[4] Christophe Tournier,et al. Kinematical performance prediction in multi-axis machining for process planning optimization , 2008 .
[5] John S. Agapiou,et al. Assuring the Day-to-Day Accuracy of Coordinate Measuring Machines—A Comparison of Tools and Procedures , 2007 .
[6] Weidong Zhu,et al. Machine tool component error extraction and error compensation by incorporating statistical analysis , 2010 .
[7] Robert J. Hocken,et al. A Technique for Enhancing Machine Tool Accuracy by Transferring the Metrology Reference From the Machine Tool to the Workpiece , 2007 .
[8] Soichi Ibaraki,et al. A Machining Test to Evaluate Geometric Errors of Five-axis Machine Tools with its Application to Thermal Deformation Test , 2014 .
[9] Yoshitaka Morimoto,et al. Accuracy Evaluation of 5-Axis Machining Center Based on Measurements of Machined Workpiece - Evaluation of Accuracy of 5-Axis Controlled Machining Center - , 2012, Int. J. Autom. Technol..
[10] Liu Hongqi,et al. Error measurement and assemble error correction of a 3D-step-gauge , 2007 .
[11] Wolfgang Knapp,et al. Model-based ‘Chase-the-Ball’ Calibration of a 5-Axes Machining Center , 2006 .
[12] Christian Brecher,et al. Thermal issues in machine tools , 2012 .
[13] Byung-Kwon Min,et al. Reduction of machining errors of a three-axis machine tool by on-machine measurement and error compensation system , 2004 .
[14] Bing Li,et al. Characteristics of and measurement methods for geometric errors in CNC machine tools , 2011 .
[15] H. Schwenke,et al. Error mapping of CMMs and machine tools by a single tracking interferometer , 2005 .
[16] Christian Brecher,et al. Volumetric thermo-elastic machine tool behavior , 2015, Prod. Eng..
[17] A. Kung,et al. A Measuring Artefact for true 3D Machine Testing and Calibration , 2005 .
[18] Raj Madhavan,et al. Benchmarking and standardization of intelligent robotic systems , 2009, 2009 International Conference on Advanced Robotics.
[19] J.R.R. Mayer,et al. Five-axis machine tool calibration by probing a scale enriched reconfigurable uncalibrated master balls artefact , 2012 .
[20] Andrew P. Longstaff,et al. Impact of measurement procedure when error mapping and compensating a small CNC machine using a multilateration laser interferometer , 2014 .
[21] C. N. Berglund,et al. An exact algorithm for self-calibration of two-dimensional precision metrology stages , 1997 .
[22] Robert Schmitt,et al. On-the-fly calibration of linear and rotary axes of machine tools and CMMs using a tracking interferometer , 2009 .
[23] Placid Mathew Ferreira,et al. Kinematic modeling of quasistatic errors of three-axis machining centers , 1994 .
[24] Wolfgang Knapp,et al. Machine tool calibration: Geometric test uncertainty depends on machine tool performance , 2009 .
[25] M.O.M. Osman,et al. Control-Oriented Modeling of Thermal Deformation of Machine Tools Based on Inverse Solution of Time-Variant Thermal Loads with Delayed Response , 2004 .
[26] W. T. Lei,et al. Total ballbar dynamic tests for five-axis CNC machine tools , 2009 .
[27] Kotaro Nagaoka,et al. Analysis Method of Motion Accuracy Using NC System with Synchronized Measurement of Tool-Tip Position , 2009, Int. J. Autom. Technol..
[28] Suk-Hwan Suh,et al. Error modelling and measurement for the rotary table of five-axis machine tools , 1998 .
[29] Guoxiong Zhang,et al. A method for machine geometry calibration using 1-D Ball array , 1991 .
[30] J.R.R. Mayer,et al. Assessment of machine tool trunnion axis motion error, using magnetic double ball bar , 2006 .
[31] E Trapet,et al. A reference object based method to determine the parametric error components of coordinate measuring machines and machine tools , 1991 .
[32] Charles Wang,et al. Measurement and compensation for volumetric positioning errors of CNC machine tools considering thermal effect , 2011 .
[33] J.R.R. Mayer,et al. A cluster analysis applied to volumetric errors of five-axis machine tools obtained by probing an uncalibrated artefact , 2010 .
[34] Dong-Woo Cho,et al. An analysis of the volumetric error uncertainty of a three-axis machine tool by beta distribution , 2000 .
[35] Jun Ni,et al. The real-time error compensation technique for CNC machining systems , 1998 .
[36] Harry H. Cheng,et al. Integrated machining error compensation method using OMM data and modified PNN algorithm , 2006 .
[37] Ondrej Svoboda. Testing the diagonal measuring technique , 2006 .
[38] Chen Hua She,et al. Kinematic errors evaluation of five-axis machine tool using direct cutting method , 2012 .
[39] Masaomi Tsutsumi,et al. Enhancement of geometric accuracy of five-axis machining centers based on identification and compensation of geometric deviations , 2013 .
[40] Charles Wang,et al. Machine tool 3D volumetric positioning error measurement under various thermal conditions , 2006, International Symposium on Precision Mechanical Measurements.
[41] Li Zhuang,et al. Integrated geometric error modeling, identification and compensation of CNC machine tools , 2012 .
[42] J. A. Yagüe,et al. Self-centering probes with parallel kinematics to verify machine-tools , 2006 .
[43] Nuodi Huang,et al. Identification and compensation of geometric errors of rotary axes on five-axis machine by on-machine measurement , 2015 .
[44] Yu Liu,et al. Accuracy improvement of miniaturized machine tool: Geometric error modeling and compensation , 2006 .
[45] Soichi Ibaraki,et al. Influence of position-dependent geometric errors of rotary axes on a machining test of cone frustum by five-axis machine tools , 2011 .
[46] C. Wang. Current issues on 3D volumetric positioning accuracy: measurement, compensation, and definition , 2008, International Symposium on Instrumentation and Control Technology.
[47] Tony L. Schmitz,et al. Case study: A comparison of error sources in high-speed milling , 2008 .
[48] Sonko Osawa,et al. Geometric calibration of a coordinate measuring machine using a laser tracking system , 2005 .
[49] Aun-Neow Poo,et al. Error compensation in machine tools — a review: Part II: thermal errors , 2000 .
[50] Soichi Ibaraki,et al. Construction of an error map of rotary axes on a five-axis machining center by static R-test , 2011 .
[51] Soichi Ibaraki,et al. Identification of Motion Error Sources on Five-axis Machine Tools by Ball-bar Measurements (1st Report) , 2010 .
[52] Andreas Archenti,et al. A new method for circular testing of machine tools under loaded condition , 2012 .
[53] Enming Miao,et al. Robustness of thermal error compensation modeling models of CNC machine tools , 2013, The International Journal of Advanced Manufacturing Technology.
[54] Soichi Ibaraki,et al. Prediction and compensation of machining geometric errors of five-axis machining centers with kinematic errors , 2009 .
[55] Stuart T. Smith,et al. Improving the accuracy of large scale monolithic parts using fiducials , 2005 .
[56] H. Kunzmann,et al. Results of the international comparison of ball plate measurements in CIRP and WECC , 1995 .
[57] 苗恩铭 Miao En-ming,et al. Application of support vector regression machine to thermal error modelling of machine tools , 2013 .
[58] J. Mou,et al. A method for enhancing the accuracy of CNC machine tools for on-machine inspection , 1992 .
[59] Soichi Ibaraki,et al. A new formulation of laser step-diagonal measurement—two-dimensional case , 2009 .
[60] Jenq-Shyong Chen,et al. Real-time compensation of time-variant volumetric error on a machining center. , 1993 .
[61] Kazuo Yamazaki,et al. Improving CNC Machine Tool Geometric Precision Using Manufacturing Process Analysis Techniques , 2014 .
[62] J.R.R. Mayer,et al. Validation of volumetric error compensation for a five-axis machine using surface mismatch producing tests and on-machine touch probing , 2014 .
[63] K. Kim,et al. Volumetric accuracy analysis based on generalized geometric error model in multi-axis machine tools , 1991 .
[64] Soichi Ibaraki,et al. Calibration of location errors of rotary axes on five-axis machine tools by on-the-machine measurement using a touch-trigger probe , 2012 .
[65] Li Huiying,et al. Notice of RetractionOverview on common interpolation methods used in CNC systems , 2010, 2010 International Conference on Computer Application and System Modeling (ICCASM 2010).
[66] John C. Ziegert,et al. The laser ball bar: a new instrument for machine tool metrology , 1994 .
[67] Robert J. Hocken,et al. Self-Calibration: Reversal, Redundancy, Error Separation, and ‘Absolute Testing’ , 1996 .
[68] Wei Gao,et al. A Three-axis Displacement Sensor with Nanometric Resolution , 2007 .
[69] Shih-Ming Wang,et al. A new high-efficiency error compensation system for CNC multi-axis machine tools , 2006 .
[70] Dong-Mok Lee,et al. A technique for accuracy improvement of squareness estimation using a double ball-bar , 2014 .
[71] Tony L. Schmitz,et al. Dynamic evaluation of spatial CNC contouring accuracy , 2000 .
[72] Toshimichi Moriwaki,et al. Thermal Deformation and Its On-Line Compensation of Hydrostatically Supported Precision Spindle , 1988 .
[73] Anthony Chukwujekwu Okafor,et al. Derivation of machine tool error models and error compensation procedure for three axes vertical machining center using rigid body kinematics , 2000 .
[74] H. Kunzmann,et al. A Uniform Concept for Calibration, Acceptance Test, and Periodic Inspection of Coordinate Measuring Machines Using Reference Objects , 1990 .
[75] Wolfgang Knapp,et al. Calibration of a 3D-ball plate , 2009 .
[76] Sylvain Lavernhe,et al. Evaluation of servo, geometric and dynamic error sources on five axis high-speed machine tool , 2011, ArXiv.
[77] Abdul Wahid Khan,et al. Systematic Geometric Error Modeling for Workspace Volumetric Calibration of a 5-axis Turbine Blade Grinding Machine , 2010 .
[78] Hai Wang,et al. Design analysis and applications of a 3D laser ball bar for accuracy calibration of multiaxis machines , 2004 .
[79] Jie Gu,et al. CNC machine tool work offset error compensation method , 2015 .
[80] J.R.R. Mayer,et al. Axis Location Errors and Error Motions Calibration for a Five-axis Machine Tool Using the SAMBA Method , 2014 .
[81] Soichi Ibaraki,et al. Machining tests to identify kinematic errors on five-axis machine tools , 2010 .
[82] Aun-Neow Poo,et al. Error compensation in machine tools — a review: Part I: geometric, cutting-force induced and fixture-dependent errors , 2000 .
[83] Guy Cloutier,et al. Theory and simulation for the identification of the link geometric errors for a five-axis machine tool using a telescoping magnetic ball-bar , 2002 .
[84] Christophe Tournier,et al. Model for performance prediction in multi-axis machining , 2006 .
[85] Behrooz Arezoo,et al. Tool path accuracy enhancement through geometrical error compensation , 2011 .
[86] Jianguo Yang,et al. Using a double ball bar to identify position-independent geometric errors on the rotary axes of five-axis machine tools , 2014 .
[87] Manfred Weck,et al. Improvement of Working Accuracy on NC Lathe by Compensation for the Thermal Expansion of Tool , 1981 .
[88] S. Weikert,et al. R-Test, a New Device for Accuracy Measurements on Five Axis Machine Tools , 2004 .
[89] Zhengchun Du,et al. Development of a multi-step measuring method for motion accuracy of NC machine tools based on cross grid encoder , 2010 .
[90] Dong-Mok Lee,et al. Identification and measurement of geometric errors for a five-axis machine tool with a tilting head using a double ball-bar , 2011 .
[91] J. B. Bryan,et al. The Abbé principle revisited: An updated interpretation , 1979 .
[92] Robert Schmitt,et al. Geometric error measurement and compensation of machines : an update , 2008 .
[93] Frank Härtig,et al. Measuring large 3D structures using four portable tracking laser interferometers , 2012 .
[94] B. Bringmann,et al. Systematic evaluation of calibration methods , 2008 .
[95] B. Muralikrishnan,et al. ASME B89.4.19 Performance Evaluation Tests and Geometric Misalignments in Laser Trackers , 2009, Journal of research of the National Institute of Standards and Technology.