Review on the strategies to improve the mechanical strength of highly porous bone bioceramic scaffolds

[1]  T. Hildebrand,et al.  Eggshell-derived amorphous calcium phosphate: Synthesis, characterization and bio-functions as bone graft materials in novel 3D osteoblastic spheroids model , 2023, Smart Materials in Medicine.

[2]  Z. Evis,et al.  Boron nitride nanofiber/Zn-doped hydroxyapatite/polycaprolactone scaffolds for bone tissue engineering applications. , 2023, Biomaterials advances.

[3]  J. Xing,et al.  Strategies of strengthening mechanical properties in the osteoinductive calcium phosphate bioceramics , 2023, Regenerative biomaterials.

[4]  T. Pepelnjak,et al.  Influence of Process Parameters on the Characteristics of Additively Manufactured Parts Made from Advanced Biopolymers , 2023, Polymers.

[5]  A. Moghanian,et al.  Significance of mechanical loading in bone fracture healing, bone regeneration, and vascularization , 2023, Journal of tissue engineering.

[6]  Jiahua Zhu,et al.  3D-printed magnesium-doped wollastonite/nano-hydroxyapatite bioceramic scaffolds with high strength and anti-tumor property , 2023, Materials & Design.

[7]  D. Keskin,et al.  Improvement of Bioactivity with Dual Bioceramic Incorporation to Nanofibrous PCL Scaffolds , 2023, Materialia.

[8]  E. Salahinejad,et al.  Performance comparison of PLA- and PLGA-coated porous bioceramic scaffolds: Mechanical, biodegradability, bioactivity, delivery and biocompatibility assessments. , 2022, Journal of controlled release : official journal of the Controlled Release Society.

[9]  S. Vaudreuil,et al.  Effects of Laser Power and Hatch Orientation on Final Properties of PA12 Parts Produced by Selective Laser Sintering , 2022, Polymers.

[10]  Q. Wei,et al.  Modification of hydroxyapatite (HA) powder by carboxymethyl chitosan (CMCS) for 3D printing bioceramic bone scaffolds , 2022, Ceramics International.

[11]  P. Zhang,et al.  Effect of Polycaprolactone Impregnation on the Properties of Calcium Silicate Scaffolds Fabricated by 3d Printing , 2022, SSRN Electronic Journal.

[12]  M. Khalid,et al.  Recent advances in 3D-printed polylactide and polycaprolactone-based biomaterials for tissue engineering applications. , 2022, International journal of biological macromolecules.

[13]  Lijia Cheng,et al.  Bone Tissue Engineering through 3D Bioprinting of Bioceramic Scaffolds: A Review and Update , 2022, Life.

[14]  N. H. Abu Kasim,et al.  3D-Printed Hydroxyapatite and Tricalcium Phosphates-Based Scaffolds for Alveolar Bone Regeneration in Animal Models: A Scoping Review , 2022, Materials.

[15]  H. Zreiqat,et al.  Personalized 3D printed bone scaffolds: a review. , 2022, Acta biomaterialia.

[16]  S. Bhaduri,et al.  Influence of Fused Deposition Modelling Nozzle Temperature on the Rheology and Mechanical Properties of 3D Printed β-Tricalcium Phosphate (TCP)/Polylactic Acid (PLA) Composite , 2022, Polymers.

[17]  M. Zivanovic,et al.  Comparison of Hydroxyapatite/Poly(lactide-co-glycolide) and Hydroxyapatite/Polyethyleneimine Composite Scaffolds in Bone Regeneration of Swine Mandibular Critical Size Defects: In Vivo Study , 2022, Molecules.

[18]  D. Toghraie,et al.  A femoral shape porous scaffold bio-nanocomposite fabricated using 3D printing and freeze-drying technique for orthopedic application , 2022, Materials Chemistry and Physics.

[19]  T. Demir,et al.  3D porous PCL-PEG-PCL / strontium, magnesium and boron multi-doped hydroxyapatite composite scaffolds for bone tissue engineering. , 2021, Journal of the mechanical behavior of biomedical materials.

[20]  Z. Evis,et al.  In vitro and in vivo properties of graphene-incorporated scaffolds for bone defect repair , 2021 .

[21]  R. He,et al.  Effects of pore size on the mechanical and biological properties of stereolithographic 3D printed HAp bioceramic scaffold , 2021 .

[22]  L. Shao,et al.  Amorphous Calcium Phosphate NPs Mediate the Macrophage Response and Modulate BMSC Osteogenesis , 2020, Inflammation.

[23]  Guisen Wang.  Influence of polydopamine/polylactic acid coating on mechanical properties and cell behavior of 3D-printed calcium silicate scaffolds , 2020 .

[24]  L. Tayebi,et al.  Biomineralization, strength and cytocompatibility improvement of bredigite scaffolds through doping/coating , 2020, Ceramics International.

[25]  Seeram Ramakrishna,et al.  The journey of multifunctional bone scaffolds fabricated from traditional toward modern techniques , 2020, Bio-Design and Manufacturing.

[26]  Z. Evis,et al.  A review of bioceramic porous scaffolds for hard tissue applications: Effects of structural features , 2020 .

[27]  R. He,et al.  Additive manufacturing of hydroxyapatite bioceramic scaffolds: Dispersion, digital light processing, sintering, mechanical properties, and biocompatibility , 2020, Journal of Advanced Ceramics.

[28]  Satoshi Kobayashi,et al.  Mechanical behavior of hydroxyapatite-poly(lactic acid) hybrid porous scaffold , 2020, Advanced Composite Materials.

[29]  D. Keskin,et al.  Cellulose acetate-gelatin-coated boron-bioactive glass biocomposite scaffolds for bone tissue engineering , 2020, Biomedical materials.

[30]  Monica Soncini,et al.  Natural and Synthetic Polymers for Bone Scaffolds Optimization , 2020, Polymers.

[31]  S. Saber-Samandari,et al.  A novel three-dimensional printing of electroconductive scaffolds for bone cancer therapy application , 2020 .

[32]  C. Hellmich,et al.  Effect of boron incorporation on the bioactivity, structure, and mechanical properties of ordered mesoporous bioactive glasses. , 2020, Journal of materials chemistry. B.

[33]  A. H. Montazeran,et al.  A porous polymeric–hydroxyapatite scaffold used for femur fractures treatment: fabrication, analysis, and simulation , 2020, European Journal of Orthopaedic Surgery & Traumatology.

[34]  Anuj Kumar,et al.  Additive Manufacturing Methods for Producing Hydroxyapatite and Hydroxyapatite-Based Composite Scaffolds: A Review , 2019, Front. Mater..

[35]  G. Perale,et al.  Simulated Performance of a Xenohybrid Bone Graft (SmartBone®) in the Treatment of Acetabular Prosthetic Reconstruction , 2019, Journal of functional biomaterials.

[36]  P. Miranda,et al.  Development by robocasting and mechanical characterization of hybrid HA/PCL coaxial scaffolds for biomedical applications , 2019, Journal of the European Ceramic Society.

[37]  J. Mauro,et al.  Mechanical properties of bioactive glasses, ceramics, glass-ceramics and composites: State-of-the-art review and future challenges. , 2019, Materials science & engineering. C, Materials for biological applications.

[38]  R. Hussain,et al.  Porous clinoptilolite—nano biphasic calcium phosphate scaffolds loaded with human dental pulp stem cells for load bearing orthopedic applications , 2019, Biomedical materials.

[39]  Kang Lin,et al.  3D Printing of Bioceramic Scaffolds—Barriers to the Clinical Translation: From Promise to Reality, and Future Perspectives , 2019, Materials.

[40]  Sheng-Jen Hsieh,et al.  Review of additive manufacturing methods for high-performance ceramic materials , 2019, The International Journal of Advanced Manufacturing Technology.

[41]  Anton Wiberg,et al.  Design for additive manufacturing – a review of available design methods and software , 2019, Rapid Prototyping Journal.

[42]  D. Keskin,et al.  Evaluation of human dental pulp stem cells behavior on a novel nanobiocomposite scaffold prepared for regenerative endodontics. , 2019, Materials science & engineering. C, Materials for biological applications.

[43]  Giuseppe Perale,et al.  Bone grafts: which is the ideal biomaterial? , 2019, Journal of clinical periodontology.

[44]  A. Deoghare,et al.  Development of bone scaffold using Puntius conchonius fish scale derived hydroxyapatite: Physico-mechanical and bioactivity evaluations , 2019, Ceramics International.

[45]  Ana Paula Serro,et al.  Additive manufacturing of ceramics for dental applications: A review. , 2019, Dental materials : official publication of the Academy of Dental Materials.

[46]  G. Perale,et al.  Three-Dimensional Craniofacial Bone Reconstruction With SmartBone on Demand. , 2019, The Journal of craniofacial surgery.

[47]  T. Attin,et al.  Pure hydroxyapatite as a substitute for enamel in erosion experiments. , 2019, Journal of dentistry.

[48]  F. Bondioli,et al.  Developing porous diopside/hydroxyapatite bio-composite scaffolds via a combination of freeze-drying and coating process , 2019, Ceramics International.

[49]  S. H. Mian,et al.  Additive manufacturing: Challenges, trends, and applications , 2019, Advances in Mechanical Engineering.

[50]  R. F. Gouveia,et al.  Evaluation of the sintering temperature on the mechanical behavior of β-tricalcium phosphate/calcium silicate scaffolds obtained by gelcasting method. , 2019, Journal of the mechanical behavior of biomedical materials.

[51]  Qian Tang,et al.  Mechanical behaviours and mass transport properties of bone-mimicking scaffolds consisted of gyroid structures manufactured using selective laser melting. , 2019, Journal of the mechanical behavior of biomedical materials.

[52]  J. Ferreira,et al.  Robocasting of Cu2+ & La3+ doped sol-gel glass scaffolds with greatly enhanced mechanical properties: Compressive strength up to 14 MPa. , 2019, Acta biomaterialia.

[53]  G. Perale,et al.  Improving Bovine Bone Mechanical Characteristics for the Development of Xenohybrid Bone Grafts. , 2019, Current pharmaceutical biotechnology.

[54]  S. Saber-Samandari,et al.  Mechanical performance of three-dimensional bio- nanocomposite scaffolds designed with digital light processing for biomedical applications , 2018 .

[55]  Ershad,et al.  Studies on effect of CuO addition on mechanical properties and in vitro cytocompatibility in 1393 bioactive glass scaffold. , 2018, Materials science & engineering. C, Materials for biological applications.

[56]  F. Tavangarian,et al.  Two-step modification process to improve mechanical properties and bioactivity of hydroxyfluorapatite scaffolds , 2018, Ceramics International.

[57]  P. Greil,et al.  Modular ceramic scaffolds for individual implants. , 2018, Acta biomaterialia.

[58]  M. Jaafar,et al.  Techniques for fabrication and construction of three-dimensional bioceramic scaffolds: Effect on pores size, porosity and compressive strength , 2018, Ceramics International.

[59]  Jiang Chang,et al.  3D-printed bioceramic scaffolds: From bone tissue engineering to tumor therapy. , 2018, Acta biomaterialia.

[60]  Thanh Phuoc Nguyen,et al.  Nano-hydroxyapatite bioactive glass composite scaffold with enhanced mechanical and biological performance for tissue engineering application , 2018, Ceramics International.

[61]  S. Dorozhkin.  Calcium Orthophosphate (CaPO4) Scaffolds for Bone Tissue Engineering Applications , 2018, Journal of Biotechnology and Biomedical Science.

[62]  Alfredo Ronca,et al.  The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction , 2018, Materials & Design.

[63]  S. Ding,et al.  Effect of porous structure and pore size on mechanical strength of 3D-printed comby scaffolds , 2018 .

[64]  Yufang Zhu,et al.  3D printing of ceramic-based scaffolds for bone tissue engineering: an overview. , 2018, Journal of materials chemistry. B.

[65]  A. Kashani,et al.  Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.

[66]  D. Keskin,et al.  Silicate-doped nano-hydroxyapatite/graphene oxide composite reinforced fibrous scaffolds for bone tissue engineering , 2018, Journal of biomaterials applications.

[67]  Julian R. Jones,et al.  Direct ink writing of highly bioactive glasses , 2018 .

[68]  N. Ozada,et al.  Bredigite-Magnetite (Ca7MgSi4O16-Fe3O4) nanoparticles: A study on their magnetic properties , 2017 .

[69]  Wenmiao Shu,et al.  3D bioactive composite scaffolds for bone tissue engineering , 2017, Bioactive materials.

[70]  C. Zhao,et al.  Preparation and Characterisation of HA/TCP Biphasic Porous Ceramic Scaffolds with Pore-oriented Structure , 2017 .

[71]  A. Aguiar-Ricardo,et al.  Bioactivity, mechanical properties and drug delivery ability of bioactive glass-ceramic scaffolds coated with a natural-derived polymer. , 2017, Materials science & engineering. C, Materials for biological applications.

[72]  Julian R Jones,et al.  Highly degradable porous melt-derived bioactive glass foam scaffolds for bone regeneration. , 2017, Acta biomaterialia.

[73]  C. Stefanini,et al.  Bovine bone matrix/poly(l-lactic-co-ε-caprolactone)/gelatin hybrid scaffold (SmartBone®) for maxillary sinus augmentation: A histologic study on bone regeneration. , 2017, International journal of pharmaceutics.

[74]  Fernando Fraternali,et al.  Dimensional accuracy analysis of coupled fused deposition modeling and vapour smoothing operations for biomedical applications , 2017 .

[75]  G. Bertrand,et al.  A review of the additive manufacturing (3DP) of bioceramics: alumina, zirconia (PSZ) and hydroxyapatite , 2017, Journal of the Australian Ceramic Society.

[76]  Noam Eliaz,et al.  Calcium Phosphate Bioceramics: A Review of Their History, Structure, Properties, Coating Technologies and Biomedical Applications , 2017, Materials.

[77]  A. Boccaccini,et al.  Bioactivation of titanium dioxide scaffolds by ALP-functionalization , 2017, Bioactive materials.

[78]  K. Khalil,et al.  Fabrication of highly porous biodegradable biomimetic nanocomposite as advanced bone tissue scaffold , 2017 .

[79]  R. Hill,et al.  Apatite Glass-Ceramics: A Review , 2017, Front. Mater..

[80]  Jie Zhou,et al.  Additively Manufactured Scaffolds for Bone Tissue Engineering and the Prediction of their Mechanical Behavior: A Review , 2017, Materials.

[81]  M. Bixel,et al.  Blood flow controls bone vascular function and osteogenesis , 2016, Nature Communications.

[82]  S. Arepalli,et al.  Enhanced bioactivity, biocompatibility and mechanical behavior of strontium substituted bioactive glasses. , 2016, Materials science & engineering. C, Materials for biological applications.

[83]  N. Mandal,et al.  Fish scale derived hydroxyapatite scaffold for bone tissue engineering , 2016 .

[84]  Zihao Wang,et al.  PEGylated poly(glycerol sebacate)-modified calcium phosphate scaffolds with desirable mechanical behavior and enhanced osteogenic capacity. , 2016, Acta biomaterialia.

[85]  S. Nandi,et al.  Doped Bioactive Glass Materials in Bone Regeneration , 2016 .

[86]  Gurbinder Kaur,et al.  Review and the state of the art: Sol-gel and melt quenched bioactive glasses for tissue engineering. , 2016, Journal of biomedical materials research. Part B, Applied biomaterials.

[87]  Xiongbiao Chen,et al.  Effect of Nanoparticle Incorporation and Surface Coating on Mechanical Properties of Bone Scaffolds: A Brief Review , 2016, Journal of functional biomaterials.

[88]  Sophia P Pilipchuk,et al.  3D-Printed Scaffolds and Biomaterials: Review of Alveolar Bone Augmentation and Periodontal Regeneration Applications , 2016, International journal of dentistry.

[89]  D. Greenspan.  Glass and Medicine: The Larry Hench Story , 2016 .

[90]  Maziar Montazerian,et al.  History and trends of bioactive glass-ceramics. , 2016, Journal of biomedical materials research. Part A.

[91]  Elke M. F. Lemos,et al.  3D nanocomposite chitosan/bioactive glass scaffolds obtained using two different routes: an evaluation of the porous structure and mechanical properties , 2016 .

[92]  Hermann Seitz,et al.  Continuous cellularization of calcium phosphate hybrid scaffolds induced by plasma polymer activation. , 2016, Materials science & engineering. C, Materials for biological applications.

[93]  Hala Zreiqat,et al.  Design and Fabrication of 3D printed Scaffolds with a Mechanical Strength Comparable to Cortical Bone to Repair Large Bone Defects , 2016, Scientific Reports.

[94]  P. Miranda,et al.  Poly-(lactic acid) infiltration of 45S5 Bioglass® robocast scaffolds: Chemical interaction and its deleterious effect in mechanical enhancement , 2016 .

[95]  P. Miranda,et al.  Improving mechanical properties of 13–93 bioactive glass robocast scaffold by poly (lactic acid) and poly (ε-caprolactone) melt infiltration , 2016 .

[96]  Yunn-Shiuan Liao,et al.  3D Printing Bioceramic Porous Scaffolds with Good Mechanical Property and Cell Affinity , 2015, PloS one.

[97]  Fernando Guiberteau,et al.  Influence of sintering temperature on the mechanical properties of ϵ-PCL-impregnated 45S5 bioglass-derived scaffolds fabricated by robocasting , 2015 .

[98]  Brian Derby,et al.  Mechanical properties of porous ceramic scaffolds: Influence of internal dimensions , 2015 .

[99]  D. Vashaee,et al.  Effect of ion substitution on properties of bioactive glasses: A review , 2015 .

[100]  E. Kolos,et al.  Biomimetic Coating on Porous Alumina for Tissue Engineering: Characterisation by Cell Culture and Confocal Microscopy , 2015, Materials.

[101]  C. Shuai,et al.  Nano SiO2 and MgO Improve the Properties of Porous β-TCP Scaffolds via Advanced Manufacturing Technology , 2015, International journal of molecular sciences.

[102]  Omar Ahmed Mohamed,et al.  Optimization of fused deposition modeling process parameters: a review of current research and future prospects , 2015, Advances in Manufacturing.

[103]  L. Hench.  The future of bioactive ceramics , 2015, Journal of Materials Science: Materials in Medicine.

[104]  A. Zamanian,et al.  Fabrication of a novel nanostructured calcium zirconium silicate scaffolds prepared by a freeze-casting method for bone tissue engineering , 2014 .

[105]  Yong He,et al.  Effect of borosilicate glass on the mechanical and biodegradation properties of 45S5-derived bioactive glass-ceramics , 2014 .

[106]  Shuping Peng,et al.  Calcium silicate ceramic scaffolds toughened with hydroxyapatite whiskers for bone tissue engineering , 2014 .

[107]  Changsheng Liu,et al.  Biomimetic porous scaffolds for bone tissue engineering , 2014 .

[108]  P. Miranda,et al.  Effect of Polymer Infiltration on the Flexural Behavior of β-Tricalcium Phosphate Robocast Scaffolds , 2014, Materials.

[109]  Roland Huet,et al.  Advances in zirconia toughened alumina biomaterials for total joint replacement. , 2014, Journal of the mechanical behavior of biomedical materials.

[110]  W. Peukert,et al.  Cobalt-releasing 1393 bioactive glass-derived scaffolds for bone tissue engineering applications. , 2014, ACS applied materials & interfaces.

[111]  Eduardo Saiz,et al.  Toward Strong and Tough Glass and Ceramic Scaffolds for Bone Repair , 2013, Advanced functional materials.

[112]  P. Miranda,et al.  Impregnation of β-tricalcium phosphate robocast scaffolds by in situ polymerization. , 2013, Journal of biomedical materials research. Part A.

[113]  Darren J. Martin,et al.  In vitro biostability of poly(dimethyl siloxane/hexamethylene oxide)-based polyurethane/layered silicate nanocomposites. , 2013, Acta biomaterialia.

[114]  Byong-Taek Lee,et al.  Poly(lactide-co-glycolide acid)/biphasic calcium phosphate composite coating on a porous scaffold to deliver simvastatin for bone tissue engineering , 2013, Journal of drug targeting.

[115]  A. Leriche,et al.  Effect of nitrogen and fluorine on mechanical properties and bioactivity in two series of bioactive glasses. , 2013, Journal of the mechanical behavior of biomedical materials.

[116]  María Vallet-Regí,et al.  Bioactive ceramics: from bone grafts to tissue engineering , 2013 .

[117]  G. Hilmas,et al.  Mechanical properties of bioactive glass (13-93) scaffolds fabricated by robotic deposition for structural bone repair. , 2013, Acta biomaterialia.

[118]  Kai Zheng,et al.  Nanoscale Bioactive Glasses in Medical Applications , 2013 .

[119]  Chengtie Wu,et al.  Silicate Bioceramics for Bone Tissue Regeneration: Silicate Bioceramics for Bone Tissue Regeneration , 2013 .

[120]  Changqing Zhang,et al.  Gentamicin-Loaded Borate Bioactive Glass Eradicates Osteomyelitis Due to Escherichia coli in a Rabbit Model , 2013, Antimicrobial Agents and Chemotherapy.

[121]  Chengtie Wu,et al.  A review of bioactive silicate ceramics , 2013, Biomedical materials.

[122]  Shuping Peng,et al.  Mechanical properties' improvement of a tricalcium phosphate scaffold with poly-l-lactic acid in selective laser sintering , 2013, Biofabrication.

[123]  Francesco Baino,et al.  Optimization of composition, structure and mechanical strength of bioactive 3-D glass-ceramic scaffolds for bone substitution , 2013, Journal of biomaterials applications.

[124]  D. Sarkar,et al.  Preparation of nanohydroxyapatite–gelatin porous scaffold and mechanical properties at cryogenic environment , 2013 .

[125]  L. Tijing,et al.  Characterization of the surface biocompatibility of an electrospun nylon 6/CaP nanofiber scaffold using osteoblasts , 2013 .

[126]  A. Zamanian,et al.  The Effect of Sintering Temperature on the Microstructural and Mechanical Characteristics of Hydroxyapatite Macroporous Scaffolds Prepared via Freeze-Casting , 2012 .

[127]  A. M. Deliormanlı,et al.  Direct-write assembly of silicate and borate bioactive glass scaffolds for bone repair , 2012 .

[128]  M. Mozafari,et al.  Enhancement of fracture toughness in bioactive glass-based nanocomposites with nanocrystalline forsterite as advanced biomaterials for bone tissue engineering applications , 2012 .

[129]  M. Bohner,et al.  Calcium phosphate bone graft substitutes: Failures and hopes , 2012 .

[130]  Antonios Kontsos,et al.  Mechanical properties and biomineralization of multifunctional nanodiamond-PLLA composites for bone tissue engineering. , 2012, Biomaterials.

[131]  Darren J. Martin,et al.  In vivo biostability of polyurethane-organosilicate nanocomposites. , 2012, Acta biomaterialia.

[132]  J. Reseland,et al.  Enhanced Osteoblast Differentiation on Scaffolds Coated with TiO2 Compared to SiO2 and CaP Coatings , 2012, Biointerphases.

[133]  Yinghong Zhou,et al.  3D-printing of highly uniform CaSiO3 ceramic scaffolds: preparation, characterization and in vivo osteogenesis , 2012 .

[134]  M. Shokrgozar,et al.  Characterization of poly(3-hydroxybutyrate)/nano-hydroxyapatite composite scaffolds fabricated without the use of organic solvents for bone tissue engineering applications , 2012 .

[135]  A. R. Santos,et al.  Technologies Applied to Stimulate Bone Regeneration , 2012 .

[136]  J. Knowles,et al.  Sol–Gel Phosphate-based Glass for Drug Delivery Applications , 2012, Journal of biomaterials applications.

[137]  Juan F. Vivanco,et al.  The effect of sintering temperature on the microstructure and mechanical properties of a bioceramic bone scaffold. , 2011, Journal of the mechanical behavior of biomedical materials.

[138]  S. Dorozhkin.  Calcium orthophosphates , 2011, Biomatter.

[139]  张志愿,et al.  Proliferation and osteogenic differentiation of human periodontalligament cells on akermanite and beta-TCP bioceramics , 2011 .

[140]  Chengtie Wu,et al.  The effect of zirconium incorporation on the physiochemical and biological properties of mesoporous bioactive glasses scaffolds , 2011 .

[141]  Jiang Chang,et al.  Improvement of mechanical properties of macroporous β-tricalcium phosphate bioceramic scaffolds with uniform and interconnected pore structures , 2011 .

[142]  Yunqing Kang,et al.  Enhanced mechanical performance and biological evaluation of a PLGA coated β-TCP composite scaffold for load-bearing applications. , 2011, European polymer journal.

[143]  Delbert E Day,et al.  Bioactive glass in tissue engineering. , 2011, Acta biomaterialia.

[144]  J. Lee,et al.  Fabrication of porous ceramic composites with improved compressive strength from coal fly ash , 2011 .

[145]  Hsueh-Chuan Hsu,et al.  Preparation and characterization of four different compositions of calcium phosphate scaffolds for bone tissue engineering , 2011 .

[146]  Xiongbiao Chen,et al.  Mechanical properties of natural cartilage and tissue-engineered constructs. , 2011, Tissue engineering. Part B, Reviews.

[147]  Julian R Jones,et al.  Melt-derived bioactive glass scaffolds produced by a gel-cast foaming technique. , 2011, Acta biomaterialia.

[148]  Eduardo Saiz,et al.  Bioinspired Strong and Highly Porous Glass Scaffolds , 2011, Advanced functional materials.

[149]  R. Appleyard,et al.  Effects of bioactive glass nanoparticles on the mechanical and biological behavior of composite coated scaffolds. , 2011, Acta biomaterialia.

[150]  João F. Mano,et al.  Polymer/bioactive glass nanocomposites for biomedical applications: A review , 2010 .

[151]  J. Chevalier,et al.  Mechanical properties and cytocompatibility of poly(ε-caprolactone)-infiltrated biphasic calcium phosphate scaffolds with bimodal pore distribution. , 2010, Acta biomaterialia.

[152]  Fernando Guiberteau,et al.  Improving the compressive strength of bioceramic robocast scaffolds by polymer infiltration. , 2010, Acta biomaterialia.

[153]  Q. Fu,et al.  Silicate, borosilicate, and borate bioactive glass scaffolds with controllable degradation rate for bone tissue engineering applications. I. Preparation and in vitro degradation. , 2010, Journal of biomedical materials research. Part A.

[154]  Robert J Levy,et al.  Prevention of polyurethane oxidative degradation with phenolic antioxidants covalently attached to the hard segments: structure-function relationships. , 2010, Journal of biomedical materials research. Part A.

[155]  A. L. Ortiz,et al.  Clarifying the effect of sintering conditions on the microstructure and mechanical properties of β-tricalcium phosphate , 2010 .

[156]  María Vallet-Regí,et al.  Sol-gel silica-based biomaterials and bone tissue regeneration. , 2010, Acta biomaterialia.

[157]  Richard Appleyard,et al.  The influence hydroxyapatite nanoparticle shape and size on the properties of biphasic calcium phosphate scaffolds coated with hydroxyapatite-PCL composites. , 2010, Biomaterials.

[158]  Aldo R. Boccaccini,et al.  Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering , 2010, Materials.

[159]  Yin Xiao,et al.  Structure-property relationships of silk-modified mesoporous bioglass scaffolds. , 2010, Biomaterials.

[160]  Aldo R Boccaccini,et al.  Effect of bioactive glasses on angiogenesis: a review of in vitro and in vivo evidences. , 2010, Tissue engineering. Part B, Reviews.

[161]  J. Nyman,et al.  The effects of rhBMP-2 released from biodegradable polyurethane/microsphere composite scaffolds on new bone formation in rat femora. , 2009, Biomaterials.

[162]  Xiaoling Zhang,et al.  In vitro and in vivo evaluation of akermanite bioceramics for bone regeneration. , 2009, Biomaterials.

[163]  Liang Hao,et al.  Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development , 2009 .

[164]  A. Bandyopadhyay,et al.  Mesoporous calcium silicate for controlled release of bovine serum albumin protein. , 2009, Acta biomaterialia.

[165]  S. Dorozhkin.  Calcium Orthophosphates in Nature, Biology and Medicine , 2009, Materials.

[166]  A. Boccaccini,et al.  TiO2 foams with poly-(d,l-lactic acid) (PDLLA) and PDLLA/Bioglass® coatings for bone tissue engineering scaffolds , 2009 .

[167]  D. Day,et al.  Effect of borate glass composition on its conversion to hydroxyapatite and on the proliferation of MC3T3-E1 cells. , 2009, Journal of biomedical materials research. Part A.

[168]  S. Ahzi,et al.  Three-dimensional transient finite element analysis of the selective laser sintering process , 2009 .

[169]  R. Legeros,et al.  Calcium phosphate-based osteoinductive materials. , 2008, Chemical reviews.

[170]  Delbert E Day,et al.  Mechanical and in vitro performance of 13-93 bioactive glass scaffolds prepared by a polymer foam replication technique. , 2008, Acta biomaterialia.

[171]  A. Maheswaran,et al.  Synthesis and characterization of calcium phosphate based bioactive quaternary P2O5–CaO–Na2O–K2O glasses , 2008 .

[172]  F. Doğan,et al.  Freeze casting of porous hydroxyapatite scaffolds. I. Processing and general microstructure. , 2008, Journal of biomedical materials research. Part B, Applied biomaterials.

[173]  Jian Li,et al.  Mechanical and biological properties of hydroxyapatite/tricalcium phosphate scaffolds coated with poly(lactic-co-glycolic acid). , 2008, Acta biomaterialia.

[174]  Oana Bretcanu,et al.  Polymer-bioceramic composites for tissue engineering scaffolds , 2008 .

[175]  Chengtie Wu,et al.  Improvement of mechanical and biological properties of porous CaSiO3 scaffolds by poly(D,L-lactic acid) modification. , 2008, Acta biomaterialia.

[176]  J. Ferreira,et al.  Ionic Substitutions in Biphasic Hydroxyapatite and β‐Tricalcium Phosphate Mixtures: Structural Analysis by Rietveld Refinement , 2007 .

[177]  I. Song,et al.  Microstructure and properties of porous silicon carbide ceramics fabricated by carbothermal reduction and subsequent sintering process , 2007 .

[178]  Lihua Zhao,et al.  Influence of process parameters on part shrinkage in SLS , 2007 .

[179]  Eduardo Saiz,et al.  Freeze casting of hydroxyapatite scaffolds for bone tissue engineering. , 2006, Biomaterials.

[180]  K. Osakada,et al.  Rapid Manufacturing of Metal Components by Laser Forming , 2006 .

[181]  S. Kannan,et al.  Synthesis and Mechanical Performance of Biological‐Like Hydroxyapatites. , 2006 .

[182]  A. Boccaccini,et al.  Poly(D,L-lactic acid) coated 45S5 Bioglass-based scaffolds: processing and characterization. , 2006, Journal of biomedical materials research. Part A.

[183]  Julian R. Jones,et al.  Biomedical Applications: Tissue Engineering , 2006 .

[184]  W. Lim,et al.  Preparation and characterization of interpenetrating phased TCP/HA/PLGA composites , 2005 .

[185]  Eleftherios Tsiridis,et al.  Bone substitutes: an update. , 2005, Injury.

[186]  D. Kaplan,et al.  Porosity of 3D biomaterial scaffolds and osteogenesis. , 2005, Biomaterials.

[187]  Karin A. Hing,et al.  Bioceramic Bone Graft Substitutes: Influence of Porosity and Chemistry , 2005 .

[188]  J A Planell,et al.  Fabrication of low temperature macroporous hydroxyapatite scaffolds by foaming and hydrolysis of an alpha-TCP paste. , 2004, Biomaterials.

[189]  Sanjay Kumar.  Selective laser sintering: A qualitative and objective approach , 2003 .

[190]  J. Knowles.  Phosphate based glasses for biomedical applications , 2003 .

[191]  Miqin Zhang,et al.  Preparation of porous hydroxyapatite scaffolds by combination of the gel-casting and polymer sponge methods. , 2003, Biomaterials.

[192]  P. Bianco,et al.  Building bone tissue: matrices and scaffolds in physiology and biotechnology. , 2003, Brazilian journal of medical and biological research = Revista brasileira de pesquisas medicas e biologicas.

[193]  Pierre Weiss,et al.  Current state of the art of biphasic calcium phosphate bioceramics , 2003, Journal of materials science. Materials in medicine.

[194]  R. Legeros,et al.  Calcium Phosphate Bioceramics: Past, Present and Future , 2002 .

[195]  P. Layrolle,et al.  Toughening of Hydroxyapatite through Interpenetrating Organic/Inorganic Microstructure , 2002 .

[196]  J. C. Bressiani,et al.  In vivo evaluation of hydroxyapatite foams. , 2002, Journal of biomedical materials research.

[197]  S. Kanzaki,et al.  Synthesis of Porous Silicon Nitride with Unidirectionally Aligned Channels Using Freeze‐Drying Process , 2002 .

[198]  Larry L Hench,et al.  Third-Generation Biomedical Materials , 2002, Science.

[199]  K. Leong,et al.  The design of scaffolds for use in tissue engineering. Part I. Traditional factors. , 2001, Tissue engineering.

[200]  T. Albrektsson,et al.  Osteoinduction, osteoconduction and osseointegration , 2001, European Spine Journal.

[201]  C. M. Agrawal,et al.  Biodegradable polymeric scaffolds for musculoskeletal tissue engineering. , 2001, Journal of biomedical materials research.

[202]  M Bohner,et al.  Calcium orthophosphates in medicine: from ceramics to calcium phosphate cements. , 2000, Injury.

[203]  J. Polak,et al.  Ionic products of bioactive glass dissolution increase proliferation of human osteoblasts and induce insulin-like growth factor II mRNA expression and protein synthesis. , 2000, Biochemical and biophysical research communications.

[204]  A. Boskey,et al.  Fourier transform infrared microspectroscopic analysis of bones of osteocalcin-deficient mice provides insight into the function of osteocalcin. , 1998, Bone.

[205]  L L Hench,et al.  Biomaterials: a forecast for the future. , 1998, Biomaterials.

[206]  R. Legeros,et al.  Bioceramics , 1998, Bioceramics.

[207]  L. Hench,et al.  Mechanical properties of bioactive glasses, glass-ceramics and composites , 1998, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[208]  L. Hench,et al.  In-vitro protein interactions with a bioactive gel-glass , 1996 .

[209]  T. Kasuga,et al.  Preparation of Zirconia‐Toughened Bioactive Glass‐Ceramic Composite by Sinter–Hot Isostatic Pressing , 1992 .

[210]  B. Sumpio,et al.  Morphological response of human endothelial cells subjected to cyclic strain in vitro. , 1991, Microvascular research.

[211]  A. Tencer,et al.  Compressive properties of polymer coated synthetic hydroxyapatite for bone grafting. , 1985, Journal of biomedical materials research.

[212]  A. Coetzee.  Regeneration of bone in the presence of calcium sulfate. , 1980, Archives of otolaryngology.

[213]  Sheila J. Jones,et al.  The organization and gross mineralization patterns of the collagen fibres in sharpey fibre bone , 1974, Cell and Tissue Research.

[214]  K Schwarz,et al.  A bound form of silicon in glycosaminoglycans and polyuronides. , 1973, Proceedings of the National Academy of Sciences of the United States of America.

[215]  Larry L. Hench,et al.  Bonding mechanisms at the interface of ceramic prosthetic materials , 1971 .

[216]  J. K. Gong,et al.  Composition of trabecular and cortical bone , 1964, The Anatomical record.

[217]  S. Masood,et al.  Selective laser sintering in biomedical manufacturing , 2020 .

[218]  D. Dodoo‐Arhin,et al.  Mechanical properties of natural hydroxyapatite using low cold compaction pressure: Effect of sintering temperature , 2020 .

[219]  R. Reis,et al.  Bioceramics for Osteochondral Tissue Engineering and Regeneration. , 2018, Advances in experimental medicine and biology.

[220]  Pawan Kumar,et al.  Bioceramics for Hard Tissue Engineering Applications : A Review , 2018 .

[221]  Saeid Tajbakhsh,et al.  A comprehensive study on the fabrication and properties of biocomposites of poly(lactic acid)/ceramics for bone tissue engineering. , 2017, Materials science & engineering. C, Materials for biological applications.

[222]  S. Simonsen,et al.  Grain boundary corrosion of highly porous ceramic TiO2 foams is reduced by annealing and quenching , 2016 .

[223]  Jean-Pierre Kruth,et al.  Effect of Powder Size and Shape on the SLS Processability and Mechanical Properties of a TPU Elastomer , 2016 .

[224]  D. Mohebbi-Kalhori,et al.  Evaluate of Different Bioactive Glass on Mechanical Properties of Nanocomposites Prepared Using Electrospinning Method , 2015 .

[225]  Lijun Ji,et al.  In vitro bioactivity and mechanical properties of bioactive glass nanoparticles/polycaprolactone composites. , 2015, Materials science & engineering. C, Materials for biological applications.

[226]  M. Kharaziha,et al.  Preparation, Characterization and Mechanical Assessment of Poly (Lactide-Co-Glycolide)/ Hyaluronic Acid/ Fibrin/ Bioactive Glass Nano-composite Scaffolds for Cartilage Tissue Engineering Applications , 2015 .

[227]  J. Ramirez-Vick,et al.  Scaffold design for bone regeneration. , 2014, Journal of nanoscience and nanotechnology.

[228]  A. Sannino,et al.  Wollastonite/hydroxyapatite scaffolds with improved mechanical, bioactive and biodegradable properties for bone tissue engineering , 2013 .

[229]  H. Haugen,et al.  Processing of highly porous TiO2 bone scaffolds with improved compressive strength , 2013 .

[230]  Julian R Jones,et al.  Review of bioactive glass: from Hench to hybrids. , 2013, Acta biomaterialia.

[231]  A. Zamanian,et al.  The effect of processing parameters and solid concentration on the mechanical and microstructural properties of freeze-casted macroporous hydroxyapatite scaffolds. , 2013, Materials science & engineering. C, Materials for biological applications.

[232]  Jiang Chang,et al.  The effect of poly(lactic-co-glycolic acid) (PLGA) coating on the mechanical, biodegradable, bioactive properties and drug release of porous calcium silicate scaffolds. , 2012, Bio-medical materials and engineering.

[233]  Saqlain A. Shah,et al.  EffECt Of diffErEnt CaO / MgO ratiOS On thE StruCtural and MEChaniCal prOpErtiES Of biOaCtivE glaSS-CEraMiCS , 2012 .

[234]  K. Christman,et al.  Antibacterial and cell-adhesive polypeptide and poly(ethylene glycol) hydrogel as a potential scaffold for wound healing. , 2012, Acta biomaterialia.

[235]  Q. Fu,et al.  Oriented bioactive glass (13-93) scaffolds with controllable pore size by unidirectional freezing of camphene-based suspensions: Microstructure and mechanical response. , 2011, Acta biomaterialia.

[236]  L. Kaewsichan,et al.  Effects of sintering temperatures on micro-morphology, mechanical properties, and bioactivity of bone scaffolds containing calcium silicate , 2011 .

[237]  Alpesh Patel,et al.  Fabrication of highly porous tissue-engineering scaffolds using selective spherical porogens. , 2010, Bio-medical materials and engineering.

[238]  Si-yu Ni,et al.  In vitro studies of novel CaO–SiO2–MgO system composite bioceramics , 2008, Journal of materials science. Materials in medicine.

[239]  Jiang Chang,et al.  Preparation, mechanical properties and in vitro degradability of wollastonite/tricalcium phosphate macroporous scaffolds from nanocomposite powders , 2008, Journal of materials science. Materials in medicine.

[240]  Laurent Chazeau,et al.  Toughening of bio-ceramics scaffolds by polymer coating , 2007 .

[241]  Thomas Jay Webster,et al.  Nanomedicine for implants: a review of studies and necessary experimental tools. , 2007, Biomaterials.

[242]  Amy J Wagoner Johnson,et al.  The mechanical properties and osteoconductivity of hydroxyapatite bone scaffolds with multi-scale porosity. , 2007, Biomaterials.

[243]  F. Klocke,et al.  Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .

[244]  S. Biamino,et al.  Alumina–zirconia–yttria nanocomposites prepared by solution combustion synthesis , 2004 .

[245]  J. Déjou,et al.  The biodegradation mechanism of calcium phosphate biomaterials in bone. , 2002, Journal of biomedical materials research.

[246]  S. Kanzaki,et al.  Synthesis of Porous Ceramics with Complex Pore Structure by Freeze‐Dry Processing , 2001 .

[247]  P. Sepulveda.  Gelcasting foams for porous ceramics , 1997 .

[248]  A. Tencer,et al.  Bone ingrowth into ploymer coated porous synthetic coralline hydroxyapatite , 1987, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.