Global Parameters Sensitivity Analysis and Development of a Two-Dimensional Real-Time Model of Proton-Exchange-Membrane Fuel Cells

This work is supported by European Commission H2020 grant ESPESA (H2020-TWINN-2015) EU Grant agreement No: 692224.

[1]  I. Sobol.  Global sensitivity indices for nonlinear mathematical models and their Monte Carlo estimates , 2001 .

[2]  Ahmed Al-Durra,et al.  A comparative study of extremum seeking methods applied to online energy management strategy of fuel cell hybrid electric vehicles , 2017 .

[3]  Ned Djilali,et al.  CFD-based modelling of proton exchange membrane fuel cells , 2005 .

[4]  Hewu Wang,et al.  Electric power system for a Chinese fuel cell city bus , 2006 .

[5]  A. Weber,et al.  Modeling transport in polymer-electrolyte fuel cells. , 2004, Chemical reviews.

[6]  A. Ranjbar,et al.  Novel techniques of oxygen bleeding for polymer electrolyte fuel cells under impure anode feeding and poisoning condition: A computational study using OpenFOAM® , 2016 .

[7]  A. Miraoui,et al.  Development of a multiphysical multidimensional modeling of proton exchange membrane fuel cell , 2016, 2016 IEEE Transportation Electrification Conference and Expo (ITEC).

[8]  Liangfei Xu,et al.  Multi-objective energy management optimization and parameter sizing for proton exchange membrane hybrid fuel cell vehicles , 2016 .

[9]  I. Sobola,et al.  Global sensitivity indices for nonlinear mathematical models and their Monte Carlo estimates , 2001 .

[10]  Heesung Park,et al.  Numerical simulations of a full-scale polymer electrolyte fuel cell with analysing systematic performance in an automotive application , 2015 .

[11]  Abdellatif Miraoui,et al.  Dynamic variable coupling analysis and modeling of proton exchange membrane fuel cells for water and thermal management , 2016, 2016 IEEE Applied Power Electronics Conference and Exposition (APEC).

[12]  Xiaohua Zeng,et al.  Calibration methodology for energy management system of a plug-in hybrid electric vehicle , 2017 .

[13]  Ke Zhang,et al.  Parameter Sensitivity Analysis for Fractional-Order Modeling of Lithium-Ion Batteries , 2016 .

[14]  Abdellatif Miraoui,et al.  Cell layer level generalized dynamic modeling of a PEMFC stack using VHDL-AMS language , 2009 .

[15]  Tariq Shamim,et al.  CFD analysis of bubble hydrodynamics in a fuel reactor for a hydrogen-fueled chemical looping combustion system , 2014 .

[16]  M.G. Simoes,et al.  Sensitivity analysis of the modeling parameters used in Simulation of proton exchange membrane fuel cells , 2005, IEEE Transactions on Energy Conversion.

[17]  T. Shamim,et al.  Investigation of the effect of multidimensionality in PEM fuel cells , 2014 .

[18]  Daming Zhou,et al.  Study of the modeling parameter effects on the polarization characteristics of the PEM fuel cell , 2016 .

[19]  Sreenivas Jayanti,et al.  Pressure drop and flow distribution in multiple parallel-channel configurations used in proton-exchange membrane fuel cell stacks , 2006 .

[20]  Abdellatif Miraoui,et al.  Dynamic Phenomena Coupling Analysis and Modeling of Proton Exchange Membrane Fuel Cells , 2016, IEEE Transactions on Energy Conversion.

[21]  Hewu Wang,et al.  Electric power system for Chinese fuel cell city bus , 2006 .

[22]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[23]  Sayyad Nojavan,et al.  Performance improvement of a battery/PV/fuel cell/grid hybrid energy system considering load uncertainty modeling using IGDT , 2017 .

[24]  S. Clenet,et al.  Uncertainty Quantification Using Sparse Approximation for Models With a High Number of Parameters: Application to a Magnetoelectric Sensor , 2016, IEEE Transactions on Magnetics.

[25]  M. A. Mayosky,et al.  Control-Oriented Modeling and Experimental Validation of a PEMFC Generation System , 2011, IEEE Transactions on Energy Conversion.

[26]  M. Kermani,et al.  A parametric study of cathode catalyst layer structural parameters on the performance of a PEM fuel cell , 2010 .

[27]  Carlos Ocampo-Martinez,et al.  Control-oriented model of a membrane humidifier for fuel cell applications , 2017 .

[28]  Damien Paire,et al.  Multiphysical, multidimensional real-time PEM fuel cell modeling for embedded applications , 2014 .

[29]  S. Maharudrayya,et al.  Pressure losses in laminar flow through serpentine channels in fuel cell stacks , 2004 .

[30]  Belkacem Ould Bouamama,et al.  Extended Kalman Filter for prognostic of Proton Exchange Membrane Fuel Cell , 2016 .

[31]  Abdellatif Miraoui,et al.  A Multiphysic Dynamic 1-D Model of a Proton-Exchange-Membrane Fuel-Cell Stack for Real-Time Simulation , 2010, IEEE Transactions on Industrial Electronics.

[32]  P. Cochat,et al.  Et al , 2008, Archives de pediatrie : organe officiel de la Societe francaise de pediatrie.

[33]  Fei Gao,et al.  Proton exchange membrane fuel cell multi-physical dynamics and stack spatial non-homogeneity analyses , 2010 .

[34]  Andreas Bück,et al.  Passivity based control of a distributed PEM fuel cell model , 2010 .