An analysis of chemical reactor stability and control—XVI

Abstract A continuous stirred tank reactor subject to random fluctuations in flow rate and inlet temperature was simulated on a hybrid computer. The stochastic response of the reactor about unique stable deterministic steady states was studied as a function of the damping coefficient and response time of the deterministic system and the power spectrum of the stochastic input. It was found that the stochastic response could be classified into categories similar to those used for forced periodic systems according to the relationship between the deterministic system response time and the 90% cut-off frequency of the stachastic input. The nature of the stochastic response is predictable for relatively low frequency inputs but unexpected results may occur at intermediate frequencies. The magnitude of reactor state fluctuations was seen to be dependent on the deterministic damping coefficient. The distribution of reactor states was studied as a function of input process variance and it was found that the distribution can become bimodal even when the associated deterministic steady state is unique. The concept of stochastic stability is discussed and several practical stochastic stability definitions are proposed. The stochastic stability of the random systems was seen to be well described by the stochastic regions of operation predicted by the input process power spectrum and the deterministic system response time. The input variance levels necessary to produce stochastic instability can be estimated in the Quasi Steady region of operation. It was found that exposure of an autonomous limit cycle about a unique unstable deterministic steady state to high frequency random inputs may lead to effective stabilization.