Effect of temperature uncertainty on polymer electrolyte fuel cell performance

[1]  Edward L Cussler,et al.  Diffusion: Mass Transfer in Fluid Systems , 1984 .

[2]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[3]  Mark W. Verbrugge,et al.  A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell , 1992 .

[4]  Ralph E. White,et al.  A water and heat management model for proton-exchange-membrane fuel cells , 1993 .

[5]  T. Nguyen,et al.  An Along‐the‐Channel Model for Proton Exchange Membrane Fuel Cells , 1998 .

[6]  Nigel M. Sammes,et al.  Small-scale fuel cells for residential applications , 2000 .

[7]  S. Dutta,et al.  NUMERICAL PREDICTION OF TEMPERATURE DISTRIBUTION IN PEM FUEL CELLS , 2000 .

[8]  Jin Hyun Nam,et al.  Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium , 2003 .

[9]  Chao-Yang Wang,et al.  Electron Transport in PEFCs , 2004 .

[10]  Christopher Hebling,et al.  A PEM fuel cell for combined measurement of current and temperature distribution, and flow field flooding , 2004 .

[11]  Mohammad S. Alam,et al.  Neural networks-based control of active and reactive power of a stand-alone PEM fuel cell power plant , 2004 .

[12]  Kazuyoshi Fushinobu,et al.  Visualization of the Membrane Temperature Field of a Polymer Electrolyte Fuel Cell , 2004 .

[13]  Mohammad S. Alam,et al.  A dynamic model for a stand-alone PEM fuel cell power plant for residential applications , 2004 .

[14]  R. O’Hayre,et al.  Fuel Cell Fundamentals , 2005 .

[15]  Wei Jiang,et al.  Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation. Part I. Current status of modeling research and model development , 2006 .

[16]  Jin Jiang,et al.  An improved dynamic model considering effects of temperature and equivalent internal resistance for PEM fuel cell power modules , 2006 .

[17]  W. Tao,et al.  Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation. Part II: Results of sensitivity analysis and validation of the model , 2006 .

[18]  Srinivas Tadigadapa,et al.  Thin film temperature sensor for real-time measurement of electrolyte temperature in a polymer electrolyte fuel cell , 2006 .

[19]  A. Mawardi,et al.  Effects of parameter uncertainty on the performance variability of proton exchange membrane (PEM) fuel cells , 2006 .

[20]  David P. Wilkinson,et al.  In Situ Experimental Technique for Measurement of Temperature and Current Distribution in Proton Exchange Membrane Fuel Cells , 2006 .

[21]  Hang Guo,et al.  Temperature distribution on the MEA surface of a PEMFC with serpentine channel flow bed , 2006 .

[22]  W. Yan,et al.  Effects of operating conditions on cell performance of PEM fuel cells with conventional or interdigitated flow field , 2006 .

[23]  Nigel P. Brandon,et al.  Application of infrared thermal imaging to the study of pellet solid oxide fuel cells , 2007 .

[24]  Xianguo Li,et al.  Analytical approach to polymer electrolyte membrane fuel cell performance and optimization , 2007 .

[25]  C. M. Rangel,et al.  High performance PEMFC stack with open-cathode at ambient pressure and temperature conditions , 2007 .

[26]  Ibrahim Dincer,et al.  Exergoeconomic analysis of a vehicular PEM fuel cell system , 2007 .

[27]  Colleen Spiegel,et al.  PEM Fuel Cell Modeling and Simulation Using Matlab , 2008 .

[28]  Mohammad S. Alam,et al.  Improved dynamic performance of hybrid PEM fuel cells and ultracapacitors for portable applications , 2008 .

[29]  Ibrahim Dincer,et al.  Performance analysis of a PEM fuel cell unit in a solar–hydrogen system , 2008 .

[30]  Wei-Jung Hsieh,et al.  Embedded flexible micro-sensors in MEA for measuring temperature and humidity in a micro-fuel cell , 2008 .

[31]  G. Maranzana,et al.  A multi-instrumented polymer exchange membrane fuel cell: Observation of the in-plane non-homogeneities , 2008 .

[32]  Juan C. Ordonez,et al.  The experimental validation of a simplified PEMFC simulation model for design and optimization purposes , 2009 .

[33]  M. Gençoglu,et al.  Design of a PEM fuel cell system for residential application , 2009 .

[34]  Willy Charon,et al.  Effects of temperature uncertainty on the performance of a degrading PEM fuel cell model , 2009 .

[35]  Jinfeng Wu,et al.  An air-cooled proton exchange membrane fuel cell with combined oxidant and coolant flow , 2009 .

[36]  Eric S. Fraga,et al.  A multi-objective optimisation model for a general polymer electrolyte membrane fuel cell system , 2010 .

[37]  D. Brett,et al.  An experimentally validated heat transfer model for thermal management design in polymer electrolyte membrane fuel cells , 2010 .

[38]  Michael Vollmer,et al.  Infrared Thermal Imaging: Fundamentals, Research and Applications , 2010 .

[39]  Xianguo Li,et al.  Analysis of liquid water transport in cathode catalyst layer of PEM fuel cells , 2010 .

[40]  N. Brandon,et al.  Application of thermal imaging to validate a heat transfer model for polymer electrolyte fuel cells , 2010 .

[41]  Zhong‐sheng Liu,et al.  Effective transport coefficients in PEM fuel cell catalyst and gas diffusion layers: Beyond Bruggeman approximation , 2010 .

[42]  Jon G. Pharoah,et al.  On the temperature distribution in polymer electrolyte fuel cells , 2010 .

[43]  Liejin Guo,et al.  Simultaneous measurement of current and temperature distributions in a proton exchange membrane fuel cell , 2010 .

[44]  Fabio Borello,et al.  Sensitivity analysis of temperature uncertainty in an aircraft PEM fuel cell , 2011 .

[45]  V. Dharma Rao,et al.  Parametric sensitivity analysis of PEM fuel cell electrochemical Model , 2011 .

[46]  Zhong‐sheng Liu,et al.  Effects of catalyst layer structure and wettability on liquid water transport in polymer electrolyte membrane fuel cell , 2011 .

[47]  Michael M. Daino,et al.  Through-Plane Water Transport Visualization in a PEMFC by Visible and Infrared Imaging , 2011 .

[48]  David R. Cox,et al.  Principles of Applied Statistics , 2011 .

[49]  G. Bender,et al.  Applying infrared thermography as a quality-control tool for the rapid detection of polymer-electrolyte-membrane-fuel-cell catalyst-layer-thickness variations , 2012 .

[50]  J. Devore,et al.  Continuous Random Variables and Probability Distributions , 2012 .

[51]  M. Wang,et al.  Experimental study of temperature distribution on anodic surface of MEA inside a PEMFC with parallel channels flow bed , 2012 .