A Markovian Approach Applied to Reliability Modeling of Bidirectional DC-DC Converters Used in PHEVs and Smart Grids

In this paper, a stochastic approach is proposed for reliability assessment of bidirectional DCDC converters, including the fault-tolerant ones. This type of converters can be used in a smart DC grid, feeding DC loads such as home appliances and plug-in hybrid electric vehicles (PHEVs). The reliability of bidirectional DC-DC converters is of such an importance, due to the key role of the expected increasingly utilization of DC grids in modern Smart Grid. Markov processes are suggested for reliability modeling and consequently calculating the expected effective lifetime of bidirectional converters. A three-leg bidirectional interleaved converter using data of Toyota Prius 2012 hybrid electric vehicle is used as a case study. Besides, the influence of environment and ambient temperature on converter lifetime is studied. The impact of modeling the reliability of the converter and adding reliability constraints on the technical design procedure of the converter is also investigated. In order to investigate the effect of leg increase on the lifetime of the converter, single leg to five-leg interleave DC-DC converters are studied considering economical aspect and the results are extrapolated for six and seven-leg converters. The proposed method could be generalized so that the number of legs and input and output capacitors could be an arbitrary number.

[1]  Joeri Van Mierlo,et al.  Analysis, Modeling, and Implementation of a Multidevice Interleaved DC/DC Converter for Fuel Cell Hybrid Electric Vehicles , 2012, IEEE Transactions on Power Electronics.

[2]  Roy Billinton,et al.  Reliability evaluation of engineering systems : concepts and techniques , 1992 .

[3]  Po-Wa Lee,et al.  Steady-state analysis of an interleaved boost converter with coupled inductors , 2000, IEEE Trans. Ind. Electron..

[4]  R. W. De Doncker,et al.  Reliability Prediction for Inverters in Hybrid Electrical Vehicles , 2007 .

[5]  Yantao Song,et al.  Survey on Reliability of Power Electronic Systems , 2013, IEEE Transactions on Power Electronics.

[6]  Md. Arifujjaman,et al.  Reliability comparison of power electronic converters for grid-connected 1.5kW wind energy conversion system , 2013 .

[7]  Peng Xu,et al.  A novel current-sharing control technique for low-voltage high-current voltage regulator module applications , 2000 .

[8]  Mehran Sabahi,et al.  Reliability Evaluation of Conventional and Interleaved DC–DC Boost Converters , 2015, IEEE Transactions on Power Electronics.

[9]  Edwin Sutrisno.  Fault detection and prognostics of insulated gate bipolar transistor (igbt) using a k-nearest neighbor classification algorithm , 2013 .

[10]  Ke Ma.  Thermal " Loading " and " Lifetime " Estimation " for " Power " Device " Considering " Mission " Profiles " in " Wind " Power " Converter " , 2014 .

[11]  Brian B. Johnson,et al.  Fault impacts on solar power unit reliability , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[12]  Chester Coomer,et al.  Evaluation of the 2010 Toyota Prius Hybrid Synergy Drive System , 2011 .

[13]  P. Weber,et al.  Fault-tolerant Power Electronic Converters: Reliability Analysis of Active Power Filter , 2007, 2007 IEEE International Symposium on Industrial Electronics.

[14]  A. Davoudi,et al.  A Unified Approach to Reliability Assessment of Multiphase DC–DC Converters in Photovoltaic Energy Conversion Systems , 2012, IEEE Transactions on Power Electronics.

[15]  M. Naidu,et al.  Fault-Tolerant Permanent Magnet Motor Drive Topologies for Automotive X-By-Wire Systems , 2010 .

[16]  Frede Blaabjerg,et al.  Reliability of Capacitors for DC-Link Applications in Power Electronic Converters—An Overview , 2014, IEEE Transactions on Industry Applications.

[17]  Ajeet Rohatgi,et al.  Development of a Methodology for Improving Photovoltaic Inverter Reliability , 2008, IEEE Transactions on Industrial Electronics.

[18]  Frédéric Richardeau,et al.  Reliability Calculation of Multilevel Converters: Theory and Applications , 2013, IEEE Transactions on Industrial Electronics.

[19]  Nan Chen,et al.  Reliability modeling and analysis for a novel design of modular converter system of wind turbines , 2013, Reliab. Eng. Syst. Saf..

[20]  Yantao Song,et al.  A hybrid electric vehicle powertrain with fault-tolerant capability , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[21]  H. Calleja,et al.  Reliability-Oriented Assessment of a DC/DC Converter for Photovoltaic Applications , 2007, 2007 IEEE Power Electronics Specialists Conference.

[22]  Tian-Hua Liu,et al.  Improvement of Matrix Converter Drive Reliability by Online Fault Detection and a Fault-Tolerant Switching Strategy , 2012, IEEE Transactions on Industrial Electronics.

[23]  Stig Munk-Nielsen,et al.  Efficiency and reliability improvement in wind turbine converters by grid converter adaptive control , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

[24]  Robert W. Erickson,et al.  Fundamentals of Power Electronics , 2001 .

[25]  Friedrich W. Fuchs,et al.  Reliability comparison of fault-tolerant 3L-NPC based converter topologies for application in wind turbine systems , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[26]  Ahmad Radan,et al.  Utilization of interleaved converter to improve battery performance in electric and electrical hybrid vehicles , 2014, The 5th Annual International Power Electronics, Drive Systems and Technologies Conference (PEDSTC 2014).

[27]  Luis Martinez-Salamero,et al.  Interleaved converters operation based on CMC , 1999 .

[28]  G Graditi,et al.  Efficiency and reliability comparison of DC-DC converters for single phase grid connected photovoltaic inverters , 2010, SPEEDAM 2010.