Cross-sectional void fraction distribution measurements in a vertical annulus two-phase flow by high speed X-ray computed tomography and real-time neutron radiography techniques

Abstract A real-time neutron radiography (RTNR) system and a high speed X-ray computed tomography (X-CT) system are compared for measurement of two-phase flow. Each system is used to determine the flow regime, and the void fraction distribution in a vertical annulus flow channel with particular attention on the temporal resolution of the systems and the time behaviour of the two-phase flow. The annulus flow channel is operated as a bubble column and measurements obtained for gas flow rates from 0.0 to 30.0 l/min. Both the RTNR and the X-CT systems show that the two-dimensional void fraction distribution can be obtained. The X-CT system is shown to have a superior temporal resolution capable of resolving the void fraction distribution in an ( r , θ ) plane in 4.0 ms. The RTNR system is shown to obtain void fraction distribution in a ( r , z ) plane in 33.0 ms. Void fraction distribution for bubbly flow and slug flow is determined.

[1]  A. H. Robinson,et al.  High Speed Motion Neutron Radiography of Two-Phase Flow , 1983 .

[2]  Keiji Kanda,et al.  Application of neutron radiography to visualization and void fraction measurement of air-water two-phase flow in a small diameter tube , 1993 .

[3]  T. Hibiki,et al.  Application of high-frame-rate neutron radiography with a steady thermal neutron beam to two-phase flow measurements in a metallic rectangular duct , 1995 .

[4]  J. Chang,et al.  Determination of time-dependent void fraction distribution in bubbly two-phase flow by a real-time neutron radiography technique , 1995 .

[5]  K. Uchimura,et al.  An image processing approach for two-phase interfaces visualized by a real time neutron radiography technique , 1998 .

[6]  K. Yoneda,et al.  Visualization of fluid phenomena using a high frame-rate neutron radiography with a steady thermal neutron beam , 1994 .

[7]  Keiji Kanda,et al.  Digital processing to improve image quality in real-time neutron radiography☆ , 1985 .

[8]  Jen-Shih Chang,et al.  Determination of gas-liquid bubble column instantaneous interfacial area and void fraction by a real-time neutron radiography method , 1992 .

[9]  K. Suzuki,et al.  Void fraction estimation within rod bundles based on three-fluid model and comparison with x-ray CT void data , 1990 .

[10]  Shinichi Morooka,et al.  Experimental study on void fraction in a simulated BWR fuel assembly (evaluation of cross-sectional averaged void fraction) , 1989 .

[11]  Keiichi Hori,et al.  Real-time cross-sectional averaged void fraction measurements in vertical annulus gas-liquid two-phase flow by neutron radiography and X-ray tomography techniques , 1996 .

[12]  G. Cognet,et al.  Measuring techniques in gas-liquid two-phase flows : symposium, Nancy, France, July 5-8, 1983 , 1984 .