Cyclic deformation and twinning in a semi-solid processed AZ91D magnesium alloy

[1]  T. Pollock.  Weight Loss with Magnesium Alloys , 2010, Science.

[2]  Seong-Gu Hong,et al.  Anisotropic fatigue behavior of rolled Mg–3Al–1Zn alloy , 2010 .

[3]  S. Bhole,et al.  Microstructure and tensile properties of thixomolded magnesium alloys , 2010 .

[4]  Seong-Gu Hong,et al.  Activation mode dependent {10-12} twinning characteristics in a polycrystalline magnesium alloy , 2010 .

[5]  A. Luo,et al.  Dependence of the distribution of deformation twins on strain amplitudes in an extruded magnesium alloy after cyclic deformation , 2009 .

[6]  A. Luo,et al.  Effect of strain ratio and strain rate on low cycle fatigue behavior of AZ31 wrought magnesium alloy , 2009 .

[7]  E. Essadiqi.  Magnesium sheet technology perspectives , 2009 .

[8]  Y. Uematsu,et al.  Fatigue behaviour of cast magnesium alloy AZ91 microstructurally modified by friction stir processing , 2009 .

[9]  Amit K. Ghosh,et al.  Microstructure and porosity in thixomolded Mg alloys and minimizing adverse effects on formability , 2009 .

[10]  J. Edmonds,et al.  Implications of Limiting CO2 Concentrations for Land Use and Energy , 2009, Science.

[11]  A. Luo,et al.  Low cycle fatigue properties of an extruded AZ31 magnesium alloy , 2009 .

[12]  Z. Cao,et al.  Mechanical properties of thixomolded AZ91D magnesium alloy , 2009 .

[13]  D. L. Chen,et al.  Strain controlled cyclic deformation behavior of an extruded magnesium alloy , 2008 .

[14]  G. Perricone,et al.  Thixomolded magnesium alloys: Strategic product innovation in automobiles , 2008 .

[15]  A. Luo,et al.  Strain-Controlled Low-Cycle Fatigue Properties of a Newly Developed Extruded Magnesium Alloy , 2008 .

[16]  P. Heuler,et al.  Influence of porosity and environmental impact on fatigue life of magnesium alloys , 2008 .

[17]  P. Liaw,et al.  Internal stress relaxation and load redistribution during the twinning–detwinning-dominated cyclic deformation of a wrought magnesium alloy, ZK60A , 2008 .

[18]  M. Zehetbauer,et al.  Structure and Fatigue Properties of the Mg Alloy AM60 Processed by ECAP , 2008 .

[19]  C. H. Cáceres,et al.  Strain hardening due to {10 12} twinning in pure magnesium , 2008 .

[20]  P. Liaw,et al.  Twinning–detwinning behavior during the strain-controlled low-cycle fatigue testing of a wrought magnesium alloy, ZK60A , 2008 .

[21]  M. Barnett.  Twinning and the ductility of magnesium alloys: Part II. “Contraction” twins , 2007 .

[22]  M. Barnett.  Twinning and the ductility of magnesium alloys Part I: “Tension” twins , 2007 .

[23]  M. Boniardi,et al.  Influence of Microstructure on Mechanical Properties of an AZ91D Thixomolded® Magnesium Alloy , 2007 .

[24]  C. H. Cáceres,et al.  On the strain hardening behaviour of magnesium at room temperature , 2007 .

[25]  Peter K. Liaw,et al.  Low-Cycle Fatigue Behavior of an As-Extruded AM50 Magnesium Alloy , 2007 .

[26]  J. Griffiths,et al.  Reversible plastic strain during cyclic loading–unloading of Mg and Mg–Zn alloys , 2007 .

[27]  P. Cavaliere,et al.  Fatigue behaviour of friction stir processed AZ91 magnesium alloy produced by high pressure die casting , 2007 .

[28]  B. Clausen,et al.  Twinning and Detwinning during Cyclic Deformation of Mg Alloy AZ31B , 2007 .

[29]  Zhen Liu,et al.  Cyclic Deformation Behaviour and Potential Automobile Application of Magnesium Die Casting Alloys AZ91 and AM50 , 2007 .

[30]  F. Czerwinski.  Selected Aspects of Semisolid Forming Magnesium Alloys , 2007 .

[31]  Z. Cao,et al.  Microstructural evolution of thixomolded AZ91D magnesium alloy with process parameters variation , 2007 .

[32]  T. Pollock,et al.  Microstructure and properties of blended Mg−Al alloys fabricated by semisolid processing , 2006 .

[33]  F. Czerwinski.  A novel method of alloy creation by mixing thixotropic slurries , 2005 .

[34]  J. Koike.  Enhanced deformation mechanisms by anisotropic plasticity in polycrystalline Mg alloys at room temperature , 2005 .

[35]  S. Agnew,et al.  Plastic anisotropy and the role of non-basal slip in magnesium alloy AZ31B , 2005 .

[36]  S. Xie,et al.  Semi-Solid Processing Technologies of Magnesium Alloys , 2005 .

[37]  J. Lo,et al.  Overview of Key R&D Activities for the Development of High-Performance Magnesium Materials in Canada , 2005 .

[38]  Jian Shen,et al.  Low-Cycle Fatigue Behavior of Magnesium Alloy AZ91 , 2005 .

[39]  Lijia Chen,et al.  Low-cycle fatigue behavior of two magnesium alloys , 2005 .

[40]  S. Xu,et al.  ROLE OF MECHANICAL TWINNING IN TENSILE COMPRESSIVE YIELD ASYMMETRY OF DIE CAST MG ALLOYS , 2005 .

[41]  D. McDowell,et al.  High cycle fatigue of a die cast AZ91E-T4 magnesium alloy , 2004 .

[42]  C. H. Cáceres,et al.  Pseudoelastic behaviour of cast magnesium AZ91 alloy under cyclic loading–unloading , 2003 .

[43]  S. Stanzl-Tschegg,et al.  Influence of porosity on the fatigue limit of die cast magnesium and aluminium alloys , 2003 .

[44]  K. Maruyama,et al.  Newly Developed Heat Resistant Magnesium Alloy by Thixomolding® , 2003 .

[45]  K. Kainer,et al.  Magnesium alloys and technology , 2003 .

[46]  H. Zenner,et al.  Cyclic material behaviour of magnesium die castings and extrusions , 2002 .

[47]  H. Zenner,et al.  Fatigue strength of die-cast magnesium components , 2002 .

[48]  H. Mcqueen,et al.  Twinning, dynamic recovery and recrystallization in hot worked Mg–Al–Zn alloy , 2002 .

[49]  D. McDowell,et al.  High cycle fatigue mechanisms in a cast AM60B magnesium alloy , 2002 .

[50]  L. Kump.  Reducing uncertainty about carbon dioxide as a climate driver , 2002, Nature.

[51]  A. Serra,et al.  Twins as barriers to basal slip in hexagonal-close-packed metals , 2002 .

[52]  H. Höppel,et al.  Cyclic deformation and fatigue behaviour of the magnesium alloy AZ91 , 2001 .

[53]  F. Czerwinski,et al.  Correlating the microstructure and tensile properties of a thixomolded AZ91D magnesium alloy , 2001 .

[54]  L. Zheng,et al.  Cyclic deformation behavior of high pressure die casting alloy AM50 , 1999 .

[55]  V. Ogarevic,et al.  Application and Verification of Fatigue Life Calculation Methods for AZ91E-T6 Cast Magnesium Alloy Under Variable Amplitude Loading , 1993 .

[56]  R. Stephens,et al.  Fatigue of AZ91E-T6 Cast Magnesium Alloy , 1993 .

[57]  T. Yue,et al.  Fatigue behaviour of short alumina fibre reinforced AZ91 magnesium alloy metal matrix composite , 1991 .

[58]  Campbell Laird,et al.  Mechanisms of cyclic softening and cyclic creep in low carbon steel , 1987 .

[59]  M. Horstemeyer,et al.  Fatigue Crack Growth Mechanisms in High-Pressure Die-Cast Magnesium Alloys , 2008 .

[60]  G. Totten.  FATIGUE CRACK PROPAGATION , 2008 .

[61]  S. Suresh.  Fatigue of materials , 1991 .

[62]  Robert E. Reed-Hill,et al.  Physical Metallurgy Principles , 1972 .