Effect of the ratio of maleated polypropylene to organoclay on the structure and properties of TPO-based nanocomposites. Part I: Morphology and mechanical properties

[1]  Do Hoon Kim,et al.  Structure and properties of polypropylene-based nanocomposites: Effect of PP-g-MA to organoclay ratio , 2007 .

[2]  K. Ahn,et al.  A novel fabrication method for poly(propylene)/clay nanocomposites by continuous processing , 2006 .

[3]  K. Ahn,et al.  Microstructural evolution of electrically activated polypropylene/layered silicate nanocomposites investigated by in situ synchrotron wide-angle X-ray scattering and dielectric relaxation analysis , 2006 .

[4]  Joung-Sook Hong,et al.  The role of organically modified layered silicate in the breakup and coalescence of droplets in PBT/PE blends , 2006 .

[5]  D. R. Paul,et al.  TPO based nanocomposites. Part 2. Thermal expansion behavior , 2006 .

[6]  Jijun Huang,et al.  Comparison of the toughening behavior of nylon 6 versus an amorphous polyamide using various maleated elastomers , 2006 .

[7]  Mehdi Hojjati,et al.  Review article: Polymer-matrix Nanocomposites, Processing, Manufacturing, and Application: An Overview , 2006 .

[8]  Donald R Paul,et al.  TPO based nanocomposites. Part 1. Morphology and mechanical properties , 2005 .

[9]  Jannick Duchet-Rumeau,et al.  Evaluation of the structure and dispersion in polymer-layered silicate nanocomposites , 2005 .

[10]  B. Vergnes,et al.  Influence of compatibilizer and processing conditions on the dispersion of nanoclay in a polypropylene matrix , 2005 .

[11]  Jae Heung Lee,et al.  Influence of addition of organoclays on morphologies in nylon 6/LLDPE blends , 2005 .

[12]  R. K. Shah,et al.  Nanocomposites from poly(ethylene- co -methacrylic acid) ionomers: effect of surfactant structure on morphology and properties , 2005 .

[13]  J. K. Mishra,et al.  Preparation, mechanical and rheological properties of a thermoplastic polyolefin (TPO)/organoclay nanocomposite with reference to the effect of maleic anhydride modified polypropylene as a compatibilizer , 2005 .

[14]  D. R. Paul,et al.  Comparison of nanocomposites based on nylon 6 and nylon 66 , 2004 .

[15]  M. Bousmina,et al.  Role of organically modified layered silicate as an active interfacial modifier in immiscible polystyrene/polypropylene blends , 2004 .

[16]  Donghong Yu,et al.  Brittle-ductile transition of particle toughened polymers: influence of the matrix properties , 2004 .

[17]  M. Cakmak,et al.  The role of plasticizer on the exfoliation and dispersion and fracture behavior of clay particles in PVC matrix: a comprehensive morphological study , 2004 .

[18]  A. Usuki,et al.  Silicate layer exfoliation in polyolefin/clay nanocomposites based on maleic anhydride modified polyolefins and organophilic clay , 2004 .

[19]  F. Mirabella,et al.  Thermoplastic olefin/clay nanocomposites: Morphology and mechanical properties , 2004 .

[20]  B. B. Khatua,et al.  Effect of Organoclay Platelets on Morphology of Nylon-6 and Poly(ethylene-ran-propylene) Rubber Blends , 2004 .

[21]  Harald Ade,et al.  Compatibilizing Bulk Polymer Blends by Using Organoclays , 2004 .

[22]  T. D. Fornes,et al.  Effect of sodium montmorillonite source on nylon 6/clay nanocomposites , 2004 .

[23]  W. Fan,et al.  Study on the dynamic self‐organization of montmorillonite in two phases , 2004 .

[24]  J. Karger‐Kocsis,et al.  The effect of organoclay on the mechanical properties and morphology of injection‐molded polyamide 6/polypropylene nanocomposites , 2004 .

[25]  Thomas S. Ellis,et al.  Thermal and mechanical properties of a polypropylene nanocomposite , 2003 .

[26]  József Karger-Kocsis,et al.  Compatibilizing effect of maleated polypropylene on the mechanical properties and morphology of injection molded polyamide 6/polypropylene/organoclay nanocomposites , 2003 .

[27]  Suprakas Sinha Ray,et al.  POLYMER/LAYERED SILICATE NANOCOMPOSITES: A REVIEW FROM PREPARATION TO PROCESSING , 2003 .

[28]  R. Piner,et al.  Atomic Force Microscopy Study of Clay Nanoplatelets and Their Impurities , 2003 .

[29]  D. García-López,et al.  Polypropylene–clay nanocomposites: effect of compatibilizing agents on clay dispersion , 2003 .

[30]  K. Ahn,et al.  Electrically Activated Poly(propylene)/Clay Nanocomposites , 2003 .

[31]  Q. Fu,et al.  Compatibilization of Immiscible Poly(propylene)/Polystyrene Blends Using Clay , 2003 .

[32]  Jeffrey W. Gilman,et al.  Characterization of Polymer-Layered Silicate (Clay) Nanocomposites by Transmission Electron Microscopy and X-Ray Diffraction: A Comparative Study , 2003 .

[33]  M. Mackley,et al.  In situ rheo-x-ray investigation of flow-induced orientation in layered silicate–syndiotactic polypropylene nanocomposite melt , 2002 .

[34]  Krishnamurthy Jayaraman,et al.  Strategies for optimizing polypropylene-clay nanocomposite structure , 2002 .

[35]  H. Sue,et al.  Morphology and toughening mechanisms in clay-modified styrene-butadiene-styrene rubber-toughened polypropylene , 2002 .

[36]  T. D. Fornes,et al.  Erratum to “Nylon 6 nanocomposites: the effect of matrix molecular weight”: [Polymer 42 (2001) 9929–40] , 2002 .

[37]  T. Sun,et al.  High‐Performance Polypropylene–Clay Nanocomposites by In‐situ Polymerization with Metallocene/Clay Catalysts , 2002 .

[38]  Xiao-hui Liu,et al.  PP/clay nanocomposites prepared by grafting-melt intercalation , 2001 .

[39]  T. D. Fornes,et al.  Nylon 6 nanocomposites: the effect of matrix molecular weight , 2001 .

[40]  Richard A. Vaia,et al.  Polymer nanocomposites : synthesis, characterization, and modeling , 2001 .

[41]  R. Krishnamoorti,et al.  Rheology of polymer layered silicate nanocomposites , 2001 .

[42]  T. Kotaka,et al.  A hierarchical structure and properties of intercalated polypropylene/clay nanocomposites , 2001 .

[43]  J. Jog,et al.  PP/clay nanocomposites: Effect of clay treatment on morphology and dynamic mechanical properties , 2001 .

[44]  Ho-Cheol Kim,et al.  On exfoliation of montmorillonite in epoxy , 2001 .

[45]  R. Mülhaupt,et al.  Morphological stability of poly(propylene) nanocomposites , 2001 .

[46]  A. Lele,et al.  A rheological study on the kinetics of hybrid formation in polypropylene nanocomposites , 2001 .

[47]  J. Bicerano,et al.  Polymeric Nanocomposites for Automotive Applications , 2000 .

[48]  P. Butler,et al.  Shear Orientation of Viscoelastic Polymer−Clay Solutions Probed by Flow Birefringence and SANS , 2000 .

[49]  Makoto Kato,et al.  Polyolefin-clay hybrids based on modified polyolefins and organophilic clay , 2000 .

[50]  R. Li,et al.  Rubber toughening in polypropylene: A review , 2000 .

[51]  P. Dubois,et al.  Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials , 2000 .

[52]  Ramanan Krishnamoorti,et al.  Linear Viscoelasticity of Disordered Polystyrene−Polyisoprene Block Copolymer Based Layered-Silicate Nanocomposites , 2000 .

[53]  R. Li,et al.  Brittle–tough transition in PP/EPDM blends: effects of interparticle distance and tensile deformation speed , 2000 .

[54]  R. Mülhaupt,et al.  Poly(propylene)/organoclay nanocomposite formation: Influence of compatibilizer functionality and organoclay modification , 2000 .

[55]  Z. Yu,et al.  Toughening and reinforcing polypropylene with core–shell structured fillers , 1999 .

[56]  R. Shanks,et al.  PP/elastomer/filler hybrids. II. Morphologies and fracture , 1996 .

[57]  A. Dibenedetto,et al.  The mechanical properties of ternary composites of polypropylene with inorganic fillers and elastomer inclusions , 1994, Journal of Materials Science.

[58]  Souheng Wu.  Phase structure and adhesion in polymer blends: a criterion for rubber toughening , 1985 .

[59]  D. Uhlmann,et al.  Rubber‐toughening in polypropylene , 1985 .

[60]  Enrico Boccaleri,et al.  Synthetic, layered nanoparticles for polymeric nanocomposites (PNCs) , 2007 .

[61]  Q. Fu,et al.  Shear‐induced change of exfoliation and orientation in polypropylene/montmorillonite nanocomposites , 2003 .

[62]  B. Hsiao,et al.  Effects of organoclays on morphology and thermal and rheological properties of polystyrene and poly(methyl methacrylate) blends , 2003 .

[63]  Donald R Paul,et al.  Thermal expansion behavior of nylon 6 nanocomposites , 2002 .

[64]  S. Tjong,et al.  Novel Preparation and Properties of Polypropylene−Vermiculite Nanocomposites , 2002 .

[65]  Emmanuel P. Giannelis,et al.  Polymer Layered Silicate Nanocomposites , 1996 .