Thrust augmentation through after-burning in scramjet nozzles

Scramjets are a class of hypersonic airbreathing engine that are associated with realizing the technology required for economical, reliable access-to-space and high-speed atmospheric transport. After-burning augments the thrust produced by the scramjet nozzle and creates a more robust nozzle design. This paper presents a numerical study of three parameters and the effect that they have on thrust augmentation. These parameters include the injection pressure, injection angle and streamwise injection position. It is shown that significant levels of thrust augmentation are produced based upon contributions from increased pressure, mass flow and energy in the nozzle. Further understanding of the phenomenon by which thrust augmentation is being produced is provided in the form of a force contribution breakdown, analysis of the nozzle flowfields and finally the analysis of the surface pressure and shear stress distributions acting upon the nozzle wall.

[1]  Charles McClinton,et al.  X-43 - Scramjet Power Breaks the Hypersonic Barrier: Dryden Lectureship in Research for 2006 , 2006 .

[2]  Brian A. Maicke,et al.  Evaluation of CFD Codes for Hypersonic Flow Modeling , 2010 .

[3]  H. D. Froning.  Investigation of very high energy rockets for future SSTO vehicles , 1989 .

[4]  Neil D. Sandham,et al.  Large Eddy Simulation of Flow Around an Airfoil Near Stall , 2010 .

[5]  Melvin J. Bulman.  THRUST AUGMENTED NOZZLE (TAN) the New Paradigm for Booster Rockets , 2006 .

[6]  Scott Forde,et al.  Thrust augmentation nozzle (TAN) concept for rocket engine booster applications , 2006 .

[7]  C. J. Schexnayder,et al.  Influence of Chemical Kinetics and Unmixedness on Burning in Supersonic Hydrogen Flames , 1980 .

[8]  T. Grundy,et al.  Progress in Astronautics and Aeronautics , 2001 .

[9]  Peter A. Jacobs,et al.  Suitability of the k–ω turbulence model for scramjet flowfield simulations , 2012 .

[10]  G. E. Dorrington,et al.  Rationale for supersonic afterburning rocket engines , 2003 .

[11]  Stephane Redonnet,et al.  NUMERICAL SIMULATION OF AERODYNAMIC NOISE , 2004 .

[12]  G. Diskin,et al.  High frequency supersonic pulsed injection , 2001 .

[13]  Krishna Murari Pandey,et al.  CFD Analysis of Mixing and Combustion of a Scramjet Combustor with a Planer Strut Injector , 2011 .

[14]  Russell R. Boyce,et al.  Nozzle design optimization for axisymmetric scramjets by using surrogate-assisted evolutionary algorithms , 2012 .

[15]  Gino Moretti,et al.  Mixing Processes in Supersonic Combustion , 1965 .

[16]  Mark Davies,et al.  Standard Handbook for Aeronautical and Astronautical Engineers , 2002 .

[17]  Roger L. Davis,et al.  Numerical Simulation of a Thrust Augmented Rocket Nozzle , 2006 .

[18]  Fred A. Ferrante,et al.  Thermal Design and Analysis of the Thrust Augmented Nozzle (TAN) Injector , 2006 .

[19]  Russell R. Boyce,et al.  SCRAMSPACE : Scramjet-based access-to-space systems , 2011 .