Transport of intense ion beams and space charge compensation issues in low energy beam lines (invited).

Over the last few years, the interest of the international scientific community for high power accelerators in the megawatt range has been increasing. For such machines, the ion source has to deliver a beam intensity that ranges from several tens up to a hundred of mA. One of the major challenges is to extract and transport the beam while minimizing the emittance growth and optimizing its injection into the radio frequency quadrupole. Consequently, it is crucial to perform precise simulations and cautious design of the low energy beam transport (LEBT) line. In particular, the beam dynamics calculations have to take into account not only the space charge effects but also the space charge compensation of the beam induced by ionization of the residual gas. The physical phenomena occurring in a high intensity LEBT and their possible effects on the beam are presented, with a particular emphasis on space charge compensation. Then, beam transport issues in different kind of LEBTs are briefly reviewed. The SOLMAXP particle-in-cell code dedicated to the modeling of the transport of charge particles under a space charge compensation regime is described. Finally, beam dynamics simulations results obtained with SOLMAXP are presented in the case of international fusion materials irradiation facility injector.

[1]  O. Delferrière,et al.  A 140 mA cw deuteron electron cyclotron resonance source for the IFMIF-EVEDA project. , 2008, The Review of scientific instruments.

[2]  J. Biarrotte,et al.  A reference accelerator scheme for ADS applications , 2006 .

[3]  Santo Gammino,et al.  Emittance improvement of the electron cyclotron resonance high intensity light ion source proton beam by gas injection in the low energy beam transport , 2000 .

[4]  L Celona,et al.  Review on high current 2.45 GHz electron cyclotron resonance sources (invited). , 2010, The Review of scientific instruments.

[5]  D. Grote,et al.  The WARP Code: Modeling High Intensity Ion Beams , 2005 .

[6]  R. Keller High-intensity ion sources for accelerators with emphasis on H- beam formation and transport (invited). , 2010, The Review of scientific instruments.

[7]  O Tuske,et al.  Electron cyclotron resonance 140 mA D(+) beam extraction optimization for IFMIF EVEDA accelerator. , 2008, The Review of scientific instruments.

[8]  A. Ismail Etude des effets transitoires de la compensation de charge d'espace sur la dynamique d'un faisceau intense , 2005 .

[9]  B Han,et al.  Ramping up the Spallation Neutron Source beam power with the H- source using 0 mg Cs/day. , 2010, The Review of scientific instruments.

[10]  T. Ropponen,et al.  IBSIMU: a three-dimensional simulation software for charged particle optics. , 2010, The Review of scientific instruments.

[11]  Santo Gammino,et al.  Improvement of beam emittance of the CEA high intensity proton source SILHI , 1999 .