A Tool for Studying the Mechanical Behavior of the Bone–Endoprosthesis System Based on Multi-scale Simulation
暂无分享,去创建一个
[1] D. Murray,et al. Characterization of metal-wear nanoparticles in pseudotumor following metal-on-metal hip resurfacing. , 2011, Nanomedicine : nanotechnology, biology, and medicine.
[2] M Browne,et al. A fatigue assessment technique for modular and pre-stressed orthopaedic implants. , 2014, Medical Engineering and Physics.
[3] J. K. Spelt,et al. Finite element analysis of a femoral retrograde intramedullary nail subject to gait loading. , 2004, Medical engineering & physics.
[4] Karen M Kruger,et al. A novel formulation for scratch-based wear modelling in total hip arthroplasty , 2014, Computer methods in biomechanics and biomedical engineering.
[5] Sean S Kohles,et al. Linear poroelastic cancellous bone anisotropy: trabecular solid elastic and fluid transport properties. , 2002, Journal of biomechanical engineering.
[6] J. Parvizi,et al. Biological response to prosthetic debris. , 2015, World journal of orthopedics.
[7] G Maier,et al. Poroelastic finite element analysis of a bone specimen under cyclic loading. , 1999, Journal of biomechanics.
[8] Y. Abousleiman,et al. Poroelastic solutions in transversely isotropic media for wellbore and cylinder , 1998 .
[9] G Bergmann,et al. Direct comparison of calculated hip joint contact forces with those measured using instrumented implants. An evaluation of a three-dimensional mathematical model of the lower limb. , 2003, Journal of biomechanics.
[10] L. Cardoso,et al. Changes of elastic constants and anisotropy patterns in trabecular bone during disuse-induced bone loss assessed by poroelastic ultrasound. , 2015, Journal of biomechanical engineering.
[11] Ding-shun She,et al. Tribological Behavior of Titanium Alloy Treated by Nitriding and Surface Texturing Composite Technology , 2019, Materials.
[12] Anna M Makuch,et al. Human cancellous bone mechanical properties and penetrator geometry in nanoindentation tests. , 2018, Acta of bioengineering and biomechanics.
[13] A. Smolin,et al. Numerical modeling of the indentation of cancellous bone , 2019, PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019.
[14] E. Gutmanas,et al. 1.8 Wear-Resistant Ceramic Films and Coatings☆ , 2017 .
[15] A. Smolin,et al. Numerical modeling of the mechanical behavior of hip resurfacing endoprosthesis and healthy bone , 2019, PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS WITH HIERARCHICAL STRUCTURE FOR NEW TECHNOLOGIES AND RELIABLE STRUCTURES 2019.
[16] J. Rho,et al. Effects of viscoelasticity and time-dependent plasticity on nanoindentation measurements of human cortical bone. , 2003, Journal of biomedical materials research. Part A.
[17] W. Kao,et al. Improved tribological properties, electrochemical resistance and biocompatibility of AISI 316L stainless steel through duplex plasma nitriding and TiN coating treatment , 2017, Journal of biomaterials applications.
[18] M. Todo. Biomechanical Analysis of Hip Joint Arthroplasties using CT-Image Based Finite Element Method , 2018 .
[19] E. A. Kolubaev,et al. Understanding the mechanisms of friction stir welding based on computer simulation using particles , 2018, Defence Technology.
[20] M. Mercuri,et al. Allograft-Prosthetic Composite in the Proximal Tibia After Bone Tumor Resection , 2008, Clinical orthopaedics and related research.
[21] S. Bryant,et al. Indentation mapping revealed poroelastic, but not viscoelastic, properties spanning native zonal articular cartilage. , 2017, Acta biomaterialia.
[22] T. Tański,et al. Prediction of the properties of PVD/CVD coatings with the use of FEM analysis , 2016 .
[23] A. Matthews,et al. Evaluating the effects of PIRAC nitrogen-diffusion treatments on the mechanical performance of Ti–6Al–4V alloy , 2014 .
[24] S. Schmauder,et al. Handbook of Mechanics of Materials , 2018 .
[25] T. Lim,et al. Poroelastic properties of bovine vertebral trabecular bone , 2000, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.
[26] Thomas M Link,et al. osteoporosis imaging : State of the Art and Advanced Imaging 1 , 2022 .
[27] A. Moroni,et al. Stress Fracture of Proximal Femur after Hip Resurfacing Treated with Cannulated Screw , 2018, Joints.
[28] Ellen Kuhl,et al. Computational modeling of hip replacement surgery: Total hip replacement vs. hip resurfacing , 2005 .
[29] K. Bouzakis,et al. The effect of specimen roughness and indenter tip geometry on the determination accuracy of thin hard coatings stress–strain laws by nanoindentation , 2002 .
[30] Sergey G. Psakhie,et al. Method of movable cellular automata as a tool for simulation within the framework of mesomechanics , 1995 .
[31] A. Smolin,et al. MULTILEVEL NUMERICAL MODEL OF HIP JOINT ACCOUNTING FOR FRICTION IN THE HIP RESURFACING ENDOPROSTHESIS , 2019, Facta Universitatis, Series: Mechanical Engineering.
[32] A. Boyde,et al. Viscoelastic properties of bone as a function of hydration state determined by nanoindentation , 2006 .
[33] M. Biot,et al. THE ELASTIC COEFFICIENTS OF THE THEORY OF CONSOLIDATION , 1957 .
[34] E. Shilko,et al. Strength of shear bands in fluid-saturated rocks: a nonlinear effect of competition between dilation and fluid flow , 2018, Scientific Reports.
[35] Xi-Qiao Feng,et al. Effect of surface roughness on nanoindentation test of thin films , 2008 .
[36] T. Joyce,et al. A large taper mismatch is one of the key factors behind high wear rates and failure at the taper junction of total hip replacements: A finite element wear analysis. , 2017, Journal of the mechanical behavior of biomedical materials.
[37] Shinya Sasaki,et al. Evaluation of the adhesion of TiN films using nanoindentation and scratch testing , 2002 .
[38] Shoujun Wu,et al. Composition, microstructure, and friction behavior of PIRAC chromium carbide coatings prepared on Q235 and T/P 24 , 2018 .
[39] Yuhang Chen,et al. Contribution of fluid in bone extravascular matrix to strain-rate dependent stiffening of bone tissue - A poroelastic study. , 2017, Journal of the mechanical behavior of biomedical materials.
[40] H. Li,et al. Preparation of titanium carbide–titanium boride coatings on Ti6Al4V by PIRAC , 2014 .
[41] O. Johnell,et al. An estimate of the worldwide prevalence and disability associated with osteoporotic fractures , 2006, Osteoporosis International.
[42] Daniel C Bridges,et al. Microindentation for In Vivo Measurement of Bone Tissue Mechanical Properties in Humans , 2010, Journal of bone and mineral research : the official journal of the American Society for Bone and Mineral Research.
[43] Aldo R. Boccaccini,et al. Bioactive Glass and Glass-Ceramic Scaffolds for Bone Tissue Engineering , 2010, Materials.
[44] P. Flores,et al. A review of squeaking in ceramic total hip prostheses , 2016 .
[45] P. Delmas,et al. Bone quality--the material and structural basis of bone strength and fragility. , 2006, The New England journal of medicine.
[46] Subra Suresh,et al. DETERMINATION OF ELASTOPLASTIC PROPERTIES BY INSTRUMENTED SHARP INDENTATION , 1999 .
[47] Zi-xiang Wu,et al. Effects of Moisture Content and Loading Profile on Changing Properties of Bone Micro-Biomechanical Characteristics , 2018, Medical science monitor : international medical journal of experimental and clinical research.
[48] David D. McErlain,et al. The poro-viscoelastic properties of trabecular bone: a micro computed tomography-based finite element study. , 2015, Journal of the mechanical behavior of biomedical materials.
[49] J. Lackner,et al. Analysis of spherical indentations of coating-substrate systems: Experiments and finite element modeling , 2013 .
[50] I. Gotman,et al. Osseointegration of Ti6Al4V alloy implants coated with titanium nitride by a new method. , 2000, The Journal of bone and joint surgery. British volume.
[51] M. Tomanik,et al. Microhardness of human cancellous bone tissue in progressive hip osteoarthritis. , 2016, Journal of the mechanical behavior of biomedical materials.
[52] Potnuru Govinda Rao,et al. FACTORS AFFECTING THE MECHANICAL PROPERTIES OF COMPACT BONE AND MINIATURE SPECIMEN TEST TECHNIQUES: A REVIEW , 2016 .
[53] Evgeny V. Shilko,et al. Overcoming the limitations of distinct element method for multiscale modeling of materials with multimodal internal structure , 2015 .
[54] Noel M. Harrison,et al. A finite element methodology for wear–fatigue analysis for modular hip implants , 2013 .
[55] F. Lofaj,et al. The effects of tip sharpness and coating thickness on nanoindentation measurements in hard coatings on softer substrates by FEM , 2017 .
[56] A. Dickinson,et al. Implant–bone interface healing and adaptation in resurfacing hip replacement , 2012, Computer methods in biomechanics and biomedical engineering.
[57] A. Cheng,et al. Fundamentals of Poroelasticity , 1993 .
[58] A. Selvadurai,et al. Mechanics of Poroelastic Media , 1996 .
[59] A. Matthews,et al. Improving the surface characteristics of Ti-6Al-4V and Timetal 834 using PIRAC nitriding treatments , 2018 .
[60] Theo H Smit,et al. Estimation of the poroelastic parameters of cortical bone. , 2002, Journal of biomechanics.
[61] Stefan Judex,et al. Combining high-resolution micro-computed tomography with material composition to define the quality of bone tissue , 2003, Current osteoporosis reports.
[62] W. Beres,et al. Three-dimensional finite element modelling of the scratch test for a TiN coated titanium alloy substrate , 2006 .
[63] A. Nicol,et al. Hip joint contact forces in normal subjects and subjects with total hip prostheses: walking and stair and ramp negotiation. , 2002, Clinical biomechanics.
[64] S. Cowin,et al. Load carrying capacity of the pore pressure in a poroelastic beam subject to oscillatory excitation , 1996 .
[65] M. Marcacci,et al. Optimizing thickness of ceramic coatings on plastic components for orthopedic applications: A finite element analysis. , 2016, Materials science & engineering. C, Materials for biological applications.
[66] B. Denkena,et al. Effect of PVD film's residual stresses on their mechanical properties, brittleness, adhesion and cutting performance of coated tools , 2017 .
[67] G. Pharr,et al. An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .
[68] E. Gutmanas,et al. Nanoindentation, Modeling, and Toughening Effects of Zirconia/Organic Nanolaminates , 2010 .
[69] Anssi Laukkanen,et al. A model for stresses, crack generation and fracture toughness calculation in scratched TiN-coated steel surfaces , 2003 .
[71] A. Smolin,et al. Simulation of mechanical behaviour of the proximal femur as a poroelastic solid using particles , 2019, Journal of Physics: Conference Series.