Energy requirement for comminution of biomass in relation to particle physical properties

Abstract The energy requirement for biomass comminution and the resulting particle physical properties are important factors to study logistic components, select equipment, and assess the overall efficiency of feedstock supply–conversion chain. In this study, mechanical size reduction of Miscanthus ( Miscanthus giganteus ), switchgrass ( Panicum virgatum ), willow ( Salix babylonica ), and energy cane ( Saccharum spp.) was carried out using a commercial-scale hammer mill, a bench-scale Retsch SM2000 knife mill and a Retsch SK100 hammer mill. The results showed that the specific energy consumption of biomass comminution and the aperture sizes of the milling screens were related in power-law forms. Biomass moisture significantly influenced comminution energy consumption, especially for finer size reduction. Given a specific milling screen, the Retsch SK100 hammer mill was found more energy efficient than the SM2000 knife mill. This was mainly attributed to the higher motor speed and axial feeding mechanism of the hammer mill. The particle sizes after comminution were found inversely proportional to the bulk densities of all four energy crops used in experiments. In addition, the comminution ratio, being the ratio of the final mean particle size and the original mean particle size, was proportional to energy consumption for all four energy crops. The bulk densities for 4-mm and smaller Miscanthus and switchgrass particles were higher than those of the original bale. Particle size and surface area estimates using commonly used ANSI/ASAE Standards S424.1 and 319.4 were highly sensitive to particle size distributions and shapes. Further studies on standardization of particle size and surface area estimates are needed.

[1]  Amit Kumar,et al.  Development and implementation of integrated biomass supply analysis and logistics model (IBSAL) , 2006 .

[2]  Phillip C. Badger,et al.  PROCESSING COST ANALYSIS FOR BIOMASS FEEDSTOCKS , 2002 .

[3]  S. Sokhansanj,et al.  Grinding performance and physical properties of wheat and barley straws, corn stover and switchgrass , 2004 .

[4]  Stephen Morrell.  A method for predicting the specific energy requirement of comminution circuits and assessing their energy utilisation efficiency , 2008 .

[5]  Douglas W. Fuerstenau,et al.  Scale-up procedure for continuous grinding mill design using population balance models , 1980 .

[6]  P. Flynn,et al.  The relative cost of biomass energy transport , 2007, Applied biochemistry and biotechnology.

[7]  David R. Tilley,et al.  Integrated energy, environmental and financial analysis of ethanol production from cellulosic switchgrass , 2009 .

[8]  S. Sokhansanj,et al.  Effects of compressive force, particle size and moisture content on mechanical properties of biomass pellets from grasses , 2006 .

[9]  Leo Liberti,et al.  Optimal running and planning of a biomass-based energy production process , 2008 .

[10]  Kevin J. Shinners,et al.  Drying, Harvesting and Storage Characteristics of Perennial Grasses as Biomass Feedstocks , 2006 .

[11]  M. Shaw.  Feedstock and process variables influencing biomass densification , 2008 .

[12]  Hari Singh,et al.  Optimizing power consumption for CNC turned parts using response surface methodology and Taguchi's technique—A comparative analysis , 2008 .

[13]  Anthony V. Bridgwater,et al.  Progress in Thermochemical Biomass Conversion , 2001 .

[14]  Shahab Sokhansanj,et al.  Switchgrass (Panicum vigratum, L.) delivery to a biorefinery using integrated biomass supply analysis and logistics (IBSAL) model. , 2007, Bioresource technology.

[15]  Susanne Paulrud,et al.  Upgraded Biofuels - Effects of Quality on Processing, Handling Characteristics, Combustion and Ash melting , 2004 .

[16]  Gerardo D. López,et al.  Assessment of size reduction as a preliminary step in the production of ethanol from lignocellulosic wastes , 1989 .

[17]  P. Badger,et al.  Use of mobile fast pyrolysis plants to densify biomass and reduce biomass handling costs—A preliminary assessment , 2006 .

[18]  Robert D. Grisso,et al.  Containerized handling to minimize hauling cost of herbaceous biomass. , 2008 .

[19]  Junyong Zhu,et al.  Specific surface to evaluate the efficiencies of milling and pretreatment of wood for enzymatic saccharification , 2009 .

[20]  Ronald L. Madl,et al.  Factors impacting ethanol production from grain sorghum in the dry-grind process. , 2007 .

[21]  Erin M. Searcy,et al.  Uniform-Format Solid Feedstock Supply System: A Commodity-Scale Design to Produce an Infrastructure-Compatible Bulk Solid from Lignocellulosic Biomass -- Executive Summary , 2009 .

[22]  T. G. Bridgeman,et al.  An investigation of the grindability of two torrefied energy crops , 2010 .

[23]  Alvin R. Womac,et al.  Bulk Density of Wet and Dry Wheat Straw and Switchgrass Particles , 2008 .

[24]  Thomas B. Voigt,et al.  Giant Miscanthus: Biomass Crop for Illinois , 2007 .

[25]  J. R. Hess,et al.  Cellulosic biomass feedstocks and logistics for ethanol production , 2007 .

[26]  M. Delwiche,et al.  Methods for Pretreatment of Lignocellulosic Biomass for Efficient Hydrolysis and Biofuel Production , 2009 .

[27]  C. Igathinathane,et al.  Process engineering evaluation of ethanol production from wood through bioprocessing and chemical catalysis , 2009 .

[28]  A R Womac,et al.  Knife grid size reduction to pre-process packed beds of high- and low-moisture switchgrass. , 2008, Bioresource technology.

[29]  Alvin R. Womac,et al.  Direct mechanical energy measures of hammer mill comminution of switchgrass, wheat straw, and corn stover and analysis of their particle size distributions , 2009 .

[30]  R. .. Morey,et al.  Factors affecting strength and durability of densified biomass products. , 2009 .

[31]  Alvin R. Womac,et al.  Size reduction of high- and low-moisture corn stalks by linear knife grid system , 2009 .

[32]  F. I. Akunov.  Generalized grinding law , 1995 .