Dynamics of Crust Dissolution and Gas Release in Tank 241-SY-101

Due primarily to an increase in floating crust thickness, the waste level in Tank 241-SY-101 has grown appreciably and the flammable gas volume stored in the crust has become a potential hazard. To remediate gas retention in the crust and the potential for buoyant displacement gas releases from the nonconvective layer at the bottom of the tank, SY-101 will be diluted to dissolve a large fraction of the solids that allow the waste to retain gas. The plan is to transfer some waste out and back-dilute with water in several steps. In this work, mechanisms and rates of waste solids dissolution and gas releases are evaluated theoretically and experimentally. Particular emphasis is given to crust dissolution processes and associated gas releases, although dissolution and gas release from the mixed-slurry and nonconvective layers are also considered. The release of hydrogen gas to the tank domespace is modeled for a number of scenarios. Under the tank conditions expected at the time of back-dilution, no plausible continuous or sudden gas release scenarios resulting in flammable hydrogen concentrations were identified.

[1]  Robert N. Maddox,et al.  Mass Transfer: Fundamentals and Applications , 1984 .

[2]  T. N. Stevenson,et al.  Fluid Mechanics , 2021, Nature.

[3]  G. Harran,et al.  Density fluctuation correlations in free turbulent binary mixing , 1994, Journal of Fluid Mechanics.

[4]  A. Shekarriz,et al.  Evaluation of scaling correlations for mobilization of double-shell tank waste , 1997 .

[5]  Phillip A. Gauglitz,et al.  Gas bubble retention and its effect on waste properties: Retention mechanisms, viscosity, and tensile and shear strengths , 1995 .

[7]  A. Bond,et al.  Principles of electrochemistry , 1987 .

[8]  Morton M. Denn,et al.  Process Fluid Mechanics , 1979 .

[9]  J. W. Lentsch.  A safety assessment for proposed pump mixing operations to mitigate episodic gas releases in tank 241-SY-101: Hanford Site,Richland, Washington , 1996 .

[10]  P. R. Bredt,et al.  The effect of dilution on the gas retention behavior of Tank 241-SY- 103 waste , 1996 .

[11]  D. L. Herting,et al.  Results of dilution studies with waste from tank 241-AN-104 , 1999 .

[13]  Z. I. Antoniak,et al.  Mitigation of tank 241-SY-101 by pump mixing: Results of full-scale testing , 1994 .

[14]  Kurtis P. Recknagle,et al.  Gas retention and release behavior in Hanford single-shell waste tanks , 1996 .

[15]  R. T. Allemann,et al.  Mitigation of Tank 241-SY-101 by pump mixing: Results of testing phases A and B , 1994 .

[16]  Phillip A. Gauglitz,et al.  Mechanisms of gas retention and release: Experimental results for Hanford waste tanks 241-AW-101 and 241-AN-103 , 1997 .

[17]  Phillip A. Gauglitz,et al.  Mechanisms of gas retention and release: Experimental results for Hanford single-shell waste tanks 241-A-101, 241-S-106, and 241-U-103 , 1998 .

[18]  G. Abraham.  Jet diffusion in stagnant ambient fluid , 1963 .

[19]  D. P. Mendoza,et al.  Mechanisms of gas bubble retention , 1994 .

[20]  Phillip A. Gauglitz,et al.  A Discussion of SY-101 Crust Gas Retention and Release Mechanisms , 1999 .

[22]  G. D. Johnson.  Flammable gas project topical report , 1997 .

[23]  Phillip A. Gauglitz,et al.  Mechanisms of gas bubble retention and release: results for Hanford Waste Tanks 241-S-102 and 241-SY-103 and single-shell tank simulants , 1996 .

[24]  Edward L Cussler,et al.  Diffusion: Mass Transfer in Fluid Systems , 1984 .