Thin cathodically electroplated chalcogenide‐based ion‐selective membranes for flow‐injection application

[1]  A. Bond,et al.  Flow injection discrimination of the chloride interference with Cu(II) electrode function of chalcogenide based solid-state copper ion-selective electrodes , 1998 .

[2]  Stephen J. Haswell,et al.  Development and operating characteristics of micro flow injection analysis systems based on electroosmotic flow : A review , 1997 .

[3]  M. Neshkova,et al.  Electrochemically prepared and optimized membrane compositions for silver(I)‐responsive chalcogenide‐based ion‐selective electrodes , 1996 .

[4]  M. D. Castro,et al.  Ion‐sensitive field‐effect transistors and ion‐selective electrodes as sensors in dynamic systems , 1995 .

[5]  M. Neshkova,et al.  Chalcogenide based all-solid-state thin electroplated ion-selective membrane for Hg(II) flow-injection determinations☆ , 1995 .

[6]  M. Josowicz.  Applications of conducting polymers in potentiometric sensors , 1995 .

[7]  M. Neshkova.  Electrochemically prepared chalcogenide ion-selective membranes as an alternative to conventional pressed-pellet ion-selective electrodes , 1993 .

[8]  M. Neshkova,et al.  Cyanide ion-selective electrodes based on thin electroplated membranes of silver chalcogenides , 1991 .

[9]  Michiyoshi Tanaka,et al.  Local ordering of anions in α-Ag2S1-xTex , 1990 .

[10]  O. Elsholz,et al.  Evaluation of experimental conditions on the response of fluoride and cyanide selective electrodes in flow injection potentiometry , 1990 .

[11]  C. Lokhande,et al.  Electrodeposition of Thin Film Semiconductors , 1989, 16 January.

[12]  J. Ruzicka.  Flow injection analysis — A survey of its potential as solution handling and data gathering technique in chemical research and industry , 1988 .

[13]  T. J. Cardwell,et al.  A multi-ion sensor cell and data-acquisition system for flow injection analysis , 1988 .

[14]  J. F. Staden.  Determination of silver in photographic material by flow-injection analysis with a coated tubular solid-state silver sulphide ion-selective electrode as detector , 1988 .

[15]  V. Young.  Theoretical and experimental conductivities of silver halide-silver sulfide ISE membranes , 1987 .

[16]  J. F. Staden,et al.  Flow-injection analysis with a coated tubular solid-state copper(II)-selective electrode , 1987 .

[17]  K. Stulík,et al.  Use of ion-selective electrodes in industrial flow analysis , 1986 .

[18]  E. Pungor,et al.  Potentiometric detection in flow analysis , 1986 .

[19]  L. Risinger.  Preconcentration of copper(II) on immobilized 8-quinolinol in a flow-injection system with an ion-selective electrode detector , 1986 .

[20]  Karl Cammann,et al.  Flow injection analysis of chloride in tap and sewage water using ion-selective electrode detection , 1985 .

[21]  M. Neshkova,et al.  The Ternary Coppersilver Selenide—A New Homogeneous Solid State Ion-Selective Electrode for Copper (II) , 1983 .

[22]  M. Trojanowicz,et al.  Limitation of linear response in flow-injection systems with ion-selective electrodes , 1982 .

[23]  M. Neshkova,et al.  Ion-selective electrodes with sensors of electrolytically plated chalcogenide coatings: Part I. Copper ion-selective electrode based on plated copper selenide , 1979 .

[24]  F. A. Kröger.  Cathodic Deposition and Characterization of Metallic or Semiconducting Binary Alloys or Compounds , 1978 .

[25]  W. E. Linden,et al.  Construction and behaviour of a micro flowthrough coppers-selective electrode , 1978 .

[26]  R. Buck,et al.  Reversible metal/salt interfaces and the relation of second kind and all-solid-state membrane electrodes , 1974 .

[27]  M. Koebel.  Standard potentials of solid-state metal ion-selective electrodes , 1974 .

[28]  M. S. Frant,et al.  Electrode indicator technique for measuring low levels of cyanide , 1972 .

[29]  M. Sato.  Half-cell potentials of semiconductive simple binary sulphides in aqueous solution , 1966 .