Investigating the distribution characteristics of boiling flow and released nuclide in the steam generator secondary side using CFD methodology

Abstract The steam generator (SG) plays an important role for the pressurized water reactor (PWR) not only in the primary-to-secondary heat transfer but also in the pressure boundary as the fission product barrier. Therefore, the leak or rupture of SG tubes results in the decrease of heat exchange capability as well as the release of radioactive nuclide to the environment. Therefore, a multi-dimensional flow boiling model is proposed in this paper to simulate the thermal–hydraulic characteristics and released nuclide distribution in the SG secondary side. This model can provide the local velocity, temperature, enthalpy, void fraction and released nuclide distributions, etc. The three-dimensional distribution characteristics of released nuclide can be reasonably captured, which includes dilution, dispersion and swirling phenomena, etc. The simulation results can provide the operator the distribution characteristics of two-phase field and released nuclide. They can also help the operator confirm the assumption for the homogeneity of released nuclide concentration for chemical sampling in the blowdown system, judge the possible leak location, and carry out the diagnostic and appropriate actions.

[1]  Shyy Wei,et al.  Steady-state natural convection with phase change , 1990 .

[2]  Wei Shyy,et al.  Enthalpy based formulations for phase-change problems with application to g-jitter , 1993 .

[3]  Samim Anghaie,et al.  NUMERICAL MODELLING OF CONDUCTION‐DRIVEN BULK EVAPORATION AND CONDENSATION PROCESSES WITH CONSTANT VOLUME , 1996 .

[4]  J. Armour,et al.  Fluid flow through woven screens , 1968 .

[5]  Shong-Leih Lee,et al.  Modeling of Darcy-Forchheimer drag for fluid flow across a bank of circular cylinders , 1997 .

[6]  D. Spalding,et al.  A calculation procedure for heat, mass and momentum transfer in three-dimensional parabolic flows , 1972 .

[7]  B. Launder,et al.  The numerical computation of turbulent flows , 1990 .

[8]  P. Cheng,et al.  Applications of Van Driest's mixing length theory to transverse thermal dispersion in forced convective flow through a packed bed , 1986 .

[9]  Samim Anghaie,et al.  Thermal-hydraulic analysis of bulk evaporation and condensation in a multiphase nuclear fuel cell , 1997 .

[10]  T. J. Liu.  Bubble size and entrance length effects on void development in a vertical channel , 1993 .

[11]  William T. Sha,et al.  A General Model for Turbulent Momentum and Heat Transport in Liquid Metals , 1979 .

[12]  R. Pletcher,et al.  Computational Fluid Mechanics and Heat Transfer. By D. A ANDERSON, J. C. TANNEHILL and R. H. PLETCHER. Hemisphere, 1984. 599 pp. $39.95. , 1986, Journal of Fluid Mechanics.

[13]  Yuh-Ming Ferng,et al.  Thermal-Hydraulic Simulation of Localized Flow Characteristics in a Steam Generator , 2001 .

[14]  Ching-Chang Chieng,et al.  Predictions of rewetting process for a nuclear fuel rod using first-principles equations , 1991 .

[15]  S. Ergun.  Fluid flow through packed columns , 1952 .

[16]  Petr N. Vabishchevich,et al.  Numerical simulation of convection/diffusion phase change problems—a review , 1993 .

[17]  S. Patankar.  Numerical Heat Transfer and Fluid Flow , 2018, Lecture Notes in Mechanical Engineering.

[18]  D. R. Poirier.  Permeability for flow of interdendritic liquid in columnar-dendritic alloys , 1987 .